• 한국작물학회지
• /
• 제34권3호
• /
• pp.239-245
• /
• 1989

벼의 Source와 Sink 관련형질의 동일주내 개체간 변이 및 상호관련성을 알기 위하여 조만성이 다른 6개벼 품종의 지상부 생육제특성을 조사, 분석하였던 바 다음과 같은 결과를 얻었다. 1. 동일건재에서 개체간 제형질의 편이 및 변이는 절간장은 하위절간, 엽신은 지엽, 엽 폭은 하위엽신에서 컸고, 수에 있어서는 2차지경과 2차지경 착생영화수에서 컸다. 2. 식물체 부위별 Source와 Sink 관련기관과 영화착색수와의 관계는 영화수는 제2엽신장 및 엽면적, 제2절간장, 제3정간태에 영향을 주는 고도의 유의적인 정상관관계이었다. 3. 절위별 절간장 및 엽위별 엽신장과 수장과의 상관관계도 제2엽신장 및 2정간장에 수장이 영향을 받는 정도가 컸다. 4. 1, 2차지경수와 영화수와의 관계는 1차지경보다는 2차지경수가 많을수록 영화수도 증가하는 상관관계이었다. 5. 식물체의 무기성분조성은 엽신, 엽초, 간, 수의 순위로 높은 함량을 나타냈다.

• 한국레이저가공학회지
• /
• 제1권1호
• /
• pp.24-29
• /
• 1998

A new wide laser beam optical system for the laser materials processing has been developed with a polygonal mirror. It consists of polygonal mirror and cooling part that prevents the surface of rotating polygonal mirror from damage by heat. The polygonal minors have been designed and made as 24 and 30 facets in pyramid type. This system provides a uniform linear laser heat source with the surface scanning width from 15 to 50mm according to the scanning height To examine the wide laser beam, He-Ne laser is used. Also, Acryl is used to confirm the laser beam pattern by bum-pattern print To analyze the energy distribution of the wide laser ben empirical values and theoretical values are compared and discussed. To improve the efficiency of the wide laser beam optical system, methods are suggested by the optical theories. For larger area processing like turbine blade, drawing blade, cold roller and guide plate, optimal overlapping locations have been calculated and analyzed by geometric and optical theories.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.431-434
• /
• 2009

Conceptual study of an open-circuit type low-speed wind tunnel for test of wind turbine blade is conducted. The tunnel is constituted of a settling chamber, a contraction, closed and open test sections, a diffuser, two corners, a cross leg and a fan and motor. For the performance test, the closed test section width of 1.8 m, height of 1.8 m and length of 5.25 m is selected. The open test section with dimension width of 1.8 m, height of 1.8 m and length of 4.14 m is adopted for aeroacoustic test. The contraction ratio is 9 to 1 and maximum speed in the closed test section is 67 m/sec. Input power in the tunnel is about 238 kW and its energy ratio is 3.6. The wind tunnel designed in present study will be an effective tool in research and development of wind turbine.

• ALGAE
• /
• 제28권4호
• /
• pp.365-369
• /
• 2013

The objective of this study was to determine the optimal blade size and timing to transplant seed-stock of Ecklonia cava Kjellman onto the reef structure. We used the modified artificial stepped reef structure. A total of 14 units (3.0 m length ${\times}$ 3.5 m width ${\times}$ 1.1 m height) were deployed 7-8 m deep under the water to examine the optimal blade size and timing to transplant seed-stock of E. cava onto the structures. Sporophytes of E. cava <1 cm in length were all died within 1 month of transplantation. The blades of 5-10 cm in length which were transplanted in March 2007 survived and grew well on the artificial reefs. Growth rates of 5-10 cm size class were higher than those of longer blade sporophytes (20-30 cm size class, transplanted in April) while the survival rates showed no difference between the classes of blade size. Both classes of 5-10 and 20-30 cm in length grew until July, and a reduction in size had occurred in September. These results indicate the importance of the blade size of E. cava and timing for successful transplantation of the seaweed on artificial reef structures.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.171-176
• /
• 2001

Plasma Display Panel(PDP) is a type of flat panel display utilizing the light emission produced by gas discharge. Barrier Ribs of PDP separating each sub-pixel prevents optical and electrical crosstalks from adjacent sub-pixels. Mold for forming barrier ribs has been newly researched to overcome the disadvantages of conventional manufacturing process such as screen printing, sand-blasting and photosensitive glass methods. Mold for PDP barrier ribs have stripes of micro grooves transferring glass-material wall. In this paper, Stripes of grooves of which width 48${\mu}{\textrm}{m}$ and 270${\mu}{\textrm}{m}$, depth 124${\mu}{\textrm}{m}$, pitch 274${\mu}{\textrm}{m}$ was acquired by machining hard and brittle materials of WC, Silicon, Alumina with dicing saw blade. Maximum roughness of the bottom and sidewall of the grooves was respectively 120nm, 287nm in grooving WC. Maximum tilt angle caused by difference between upper-most width and lower-most width was 2$^{\circ}$. Maximum Radius of bottom curvatures was 7.75${\mu}{\textrm}{m}$. This results satisfies the specification for barrier ribs of 50 inch XGA PDP if the groove form of mold was fully transferred to the barrier ribs. Barrier ribs were formed with Silicone rubber mold, which is transferred from grooved hard materials. Silicone rubber mold has elasticity accommodating the waveness of lower glass plate of PDP.

• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1457-1463
• /
• 2003

In this paper, the response surface method using three-dimensional Navier-Stokes analysis to optimize the shape of a multi-blade centrifugal fan, is described. For numerical analysis, Reynolds-averaged Navier-Stokes equations with standard k - c turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in this centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Linear Upwind Differencing Scheme(LUDS) is used to approximate the convection terms in the governing equations. SIMPLEC algorithm is used as a velocity-pressure correction procedure. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. It was found that the optimization process provides reliable design of this kind of fans with reasonable computing time.

• 대한토목학회논문집
• /
• 제13권1호
• /
• pp.65-74
• /
• 1993

중립축에 대하여 대칭인 보강된 적층평판의 좌굴하중을 극대화 하는 최적설계를 시도하였다. 전체 평판의 무게가 일정한 가운데 적층평판을 이루는 각기 판의 두께와 보강재의 단면을 이루는 두께와 높이를 설계변수로 취하였다. 유한요소법을 이용하여 평판의 좌굴하중이 계산되었으며 최적설계는 IMSL program routine을 사용하였다. 최적설계시 나타나는 optimality condition이 고도의 비선형 연립방정식이 되므로 이경우 여러개의 국부 최적점이 발견되었다. 보강재와 평판의 각층에서의 보강섬유의 방향을 달리하며 각자의 효율성을 연구 조사하였으며 이중($0^{\circ}Beam/0^{\circ}/90^{\circ}$)s인 경우에 사장 우수한 설계를 할수 있는것으로 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.2157-2161
• /
• 2003

In this paper, the response surface method using three-dimensional Navier-Stokes analysis to optimize the shape of a forward-curved blades centrifugal fan, is described. For numerical analysis, Reynolds-averaged Navier-Stokes equations with standard k-e turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in forward-curved blades centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Linear Upwind Differencing Scheme(LUDS) is used to approximate the convection terms in the governing equations. SIMPLEC algorithm is used as a velocity-pressure correction procedure. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. It was found that the optimization process provides reliable design of this kind of fans with reasonable computing time

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.601-606
• /
• 2004

Vibration spectrums of the test loop according to flow conditions were analyzed in order to identify the sources of vibration at peak frequencies. While a flow condition of the sweep test was changed by varying pump rotational speed from 450 rpm to 1500 rpm by the step 150 rpm, midspan acceleration of the test section in width-direction and dynamic pressure perturbation in the test section were measured. Other sources of vibration due to the flow structure interactions, such as acoustic resonance, blade pulsing frequency and bellows wrinkles, were investigated. Pressure perturbation in the section and acoustic resonance due to branch pipe give major effects to the vibration of the test section in high frequency range of 1.5 kHz to 2.8 kHz.

• 한국초지조사료학회지
• /
• 제15권1호
• /
• pp.67-72
• /
• 1995

To select the highest yield soiling type forage, the yield performance of selected sorghum-sudangrass hybrids imported in 1992 have been evaluated at Chonnam region. The soiling type hybrids used in this experiment were TE-haygrazer, FP-5 Sudan, Sweet sioux V, and X -78050. Three different cuttings were done on July 6, August 6 and September 16 in 1992. This trial was arranged as a randomized complete block design with three replications under taken over a period 5 months from May to September in 1992. The results of this experiment were summarized as follows: The hybrids tested were not significantly different by plant height, leaf blade length, leaf blade width and stem diameter. In the first cutting, dry matter yield of FP-5 Sudan was the highest. In the second and third cutting, dry matter yield of Sweet sioux V was the highest among hybrids. The contents of crude protein, hemicellulose, relative feeding value(RFV), and amino acid were the highest by the first cutting, but NDF and ADF were shown the lowest.