• Journal of Astronomy and Space Sciences
• /
• v.33 no.2
• /
• pp.109-117
• /
• 2016

We explain the results of Yu et al. (2015b) of the novel sharpness angle measurement to a large number of spectra obtained from the Fermi gamma-ray burst monitor. The sharpness angle is compared to the values obtained from various representative emission models: blackbody, single-electron synchrotron, synchrotron emission from a Maxwellian or power-law electron distribution. It is found that more than 91% of the high temporally and spectrally resolved spectra are inconsistent with any kind of optically thin synchrotron emission model alone. It is also found that the limiting case, a single temperature Maxwellian synchrotron function, can only contribute up to 58⁺²³₋₁₈% of the peak flux. These results show that even the sharpest but non-realistic case, the single-electron synchrotron function, cannot explain a large fraction of the observed spectra. Since any combination of physically possible synchrotron spectra added together will always further broaden the spectrum, emission mechanisms other than optically thin synchrotron radiation are likely required in a full explanation of the spectral peaks or breaks of the GRB prompt emission phase.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.83.1-83.1
• /
• 2012

We have developed an self-consistent PDR model to synthesize warm CO lines of Herschel/PACS observations more accurately. The PDR model solves the FUV continuum radiative transfer, gas energetics, and chemistry simultaneously. A local FUV radiation flux is calculated by using a Monte Carlo method taking anisotropic scattering into account. A new (r, ${\delta}$) coordinate system was used, where the r is the distance from the origin and the ${\delta}$ is z/$R^2$ in the cylindrical coordinate of (R,z). This is an adequate coordinate system to represent a power-law density of an envelope and a high spatial resolution near the outflow wall. The gas enegetics and chemistry are solved locally and considered $10^4K$ blackbody radiation field instead of the interstellar radiation filed. This newly developed model can be used to analyze quantitatively the effect of UV-heated outflow walls on the warm molecular lines in the embedded proto-stellar objects.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.12
• /
• pp.1054-1061
• /
• 2016

Development of an accurate infrared signature (IR) measurement system is expected to contribute in the development of low observable technology and the spectroscopic analysis of electromagnetic radiation. Application of a spectroradiometer (SR) allows for the measurement of detailed infrared signature from the exhaust plume due to its own heat source. Establishment of a measurement system using a micro-turbo engine is intended to simulate the modelling of the aircraft plume. The engine was installed on a test stand to measure the engine performance. The IR signature was measured by placing the SR perpendicular to the axis line of the exhaust plume. Reference data from the blackbody were also measured to calibrate the raw data, and the infrared signature of the background was also measured for comparison with that of the plume. The calibrated spectral radiance was obtained through the data reduction process and the results were analyzed in specific bands. The experiments revealed that the measurement system established here showed sufficient performance for further comprehensive analysis.

• Journal of the Korean Vacuum Society
• /
• v.12 no.1
• /
• pp.64-69
• /
• 2003

Using a high fewer electron beam gun (max. power 20 kW), Gadolinium (Gd, atomic number 64) metal was melted and the temperature distribution of melted surface was measured. With proper optical filters and the adjustment of aperture of lens, the radiation of melted surface was received by a ccd camera and its signal transferred to a computer. The real time monitoring of melted surface with a variation of electron beam Power was Possible and stable operation of electron beam was achieved. It was found that the max. temperature measured by a ccd camera with an assumption of blackbody radiation of melted Gd surface and adaption of Planet's law was above 100~$200^{\circ}C$ compared to that measured by a pyrometer in the same e-beam power.

• Proceedings of the Korean Biophysical Society Conference
• /
• 2003.06a
• /
• pp.27-27
• /
• 2003

Conformations of the +5 to +13 charge state of ubiquitin ions have been studied in the gas phase by an Electron Capture Dissociation (ECD) mass spectrometry (MS) technique. This approach has showed that the conformations of the gaseous ions change from the compact to extended structures as the number of protons on the protein ions increases, consistent with previous collisional cross-section measurements by an ion-mobility MS. However, this observation is in contrast to that of the solution-phase where the unique native structure is usually found. The (un)folding stability and kinetics of these gaseous ions were further investigated experimentally using gradual blackbody-radiation or sudden laser-induced thermal heating, respectively. These studies have provided the evidence that the thermodynamics and kinetics of protein (un)folding in the gas phase are quite different from those of the native aqueous proteins.

• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.186-189
• /
• 2002

Real-time thermal image is obtained by thermal imaging systems measuring radiant emittence according to law of Plank's blackbody radiation. The histogram of thermal image is not uniform. The signal bands of background and target are separated and grouped in narrow bands. In such a system, contrast enhancement indispensible to distinguish target from background. In this study, plateau histogram equalization using local histogram is proposed for contrast enhancement.

• Journal of Sensor Science and Technology
• /
• v.27 no.5
• /
• pp.294-299
• /
• 2018

This article describes the output properties of non-dispersive infrared carbon dioxide($CO_2$) sensors resulting from the changes in ambient temperatures. After the developed sensor module was installed inside the gas chamber, the temperature was set to 267 K, 277 K, 300 K, and 314 K, and the concentrations of $CO_2$ gas were increased from 0 to 5,000 ppm. Then, the output voltage at each concentration was obtained. Through these experimental results, two observations were made. First, both the $CO_2$ sensor and the reference sensor showed an increase in the output voltages as the temperature rose from 0 ppm, Second, the full scale outputs of the $CO_2$ sensor grew as the temperature increased. The output characteristics were analyzed based on two factors: change in the radiant energy of the infrared light source and change in the absorptivity of $CO_2$ gas according to the ambient temperature. Additionally, temperature compensation methods were discussed.

• Journal of the Korean Society of Combustion
• /
• v.11 no.3
• /
• pp.36-43
• /
• 2006

The modulated LII technique has been suggested for the measurement of axial velocity profiles of laminar diffusion flames. The theoretical background is explained based on the blackbody radiation and LII signal. Experimentally, soot particles in ethylene diffusion flames are heated by a modulated Ar-ion laser beam. LII signals and their phase angles are measured using a lock-in amplifier at the different flame heights and the axial flow velocities are obtained from the measured phase angle delay informations. The measured velocities are similar to those from LDV measurements under the same operating conditions. The effects of laser power, LII signal wavelength, and modulation frequencies are not sensitive to the velocity measurement. However, the choice of an optical chopper blade type could affect the measurement result. The use of a 6/5 chopper blade showed the better result that is. possibly due to the square shape of modulated laser beam. This study successfully demonstrated that axial flow velocities of laminar diffusion flames can be measured by a new technique utilizing LII signal, which does not need particle seeding unlikely to LDV or PIV techniques.

• Journal of the Korean Society of Combustion
• /
• v.1 no.1
• /
• pp.75-82
• /
• 1996

Laser induced incandescence, LII, recently developed technique for measuring soot concentration in flames, can overcome most of limitations of conventional laser extinction measurement. In this study, experiments were performed to investigate the effect of laser intensity, detection wavelength, and also laser beam quality on both LII signal at a particular position and peak-to-centerline LII signal ratio. The results of LII signal with increasing laser intensity shows its near-independence of laser intensity once threshold level of laser intensity has been reached. However, this near-independence depends on laser beam quality and the incident optical setup. The peak-to-centerline LII signal ratio slowly but continuously increases with laser power. This fact is due to the dependence of LII signal on particle mean diameter. LII signal is attenuated during it passes through the flame containing soot particles. The attenuation rate is inversely proportional to detection wavelength. In this study, LII signal at 680 nm band is 10% greater than the signal at 400 nm band.

• Journal of The Korean Association For Science Education
• /
• v.22 no.2
• /
• pp.357-377
• /
• 2002

This study is for better understanding about the process of students' conceptual change. As a starting point, it is assumed that the process of students' conceptual change can be viewed as the process of the successive refinement and articulation of students' conceptual framework. Based on the theoretical review of conceptual change literature, various processes, which can be involved in the above assumed process, can be found. And also, by analyzing the process of development of scientific knowledge about Planck's blackbody radiation law and Bohr's atom, six types of processes of refinement and articulation of scientific knowledge can be found. It is hoped that these theoretical discussions can guide the direction for obtaining and interpreting the students' real responses during the process of conceptual change.