• 폴리머
• /
• 제35권1호
• /
• pp.87-93
• /
• 2011

본 연구에서는 LCD 컬러필터 레지스트용 fluorene 단위 구조를 가지는 다기능 바인더 고분자를 개발하여 카본블랙 기반 감광성 레지스트(CBR)를 제조하고 블랙 매트릭스(BM)에 적용하였다. 다기능 바인더 고분자를 얻기 위해 bisphcnol fluorene epoxy acrylate를 함유한 불포화 폴리에스터(BFEA-polyester)를 합성하였으며 이는 $^1H$ NMR, GPC 및 FTIR을 이용하여 분석하였다. 합성된 BFEA-polyester 바인더 고분자를 상업용 아크릴 바인더와 비교 평가하기 위하여 각각 CBR 제조 후 BM 리소그래피 테스트를 수행하였다. 그 결과, 본 연구에서 합성된 BFEA-polyester 바인더 고분자는 적합한 광경화 반응성과 알칼리 용해성을 가질 뿐만 아니라 기존 아크릴 바인더보다 더 우수한 공정 마진, 패턴 특성 및 유리 가판에 대한 접착력을 나타내었다.

• Elastomers and Composites
• /
• 제53권3호
• /
• pp.175-180
• /
• 2018

Solution-styrene-butadiene rubber (SSBR) composites were manufactured using four kinds of fillers: silica-silane coated carbon black (SC-CB) hybrid, starch-SC-CB hybrid, pure silica, and pure starch. The influence of filler type on the mechanical properties of the rubber matrix was studied in this work. SC-CB was prepared by silane-graft-coating using vinyl triethoxy silane and carbon black, which enhanced the dispersion effect between the rubber matrix and the filler, and improved the mechanical properties of the compounds. The morphology of the composites was observed by field-emission scanning electron microscopy (FE-SEM). The thermal decomposition behavior of the composites was determined by thermogravimetric analysis (TGA), and the crosslinking behavior of the composites was tested using a rubber process analyzer (RPA). The hardness, tensile strength, swelling ratio, and gas transmittance rate of the composites were evaluated according to ASTM. The test results revealed that with the addition of SC-CB, the hybrid fillers, especially those blended with silica, showed a better reinforcement effect, the highest hardness and tensile strength, and stable thermal decomposition behavior. This implies that the silica-SC-CB hybrid filler has a notable mechanical reinforcement effect on the SSBR matrix. Because of self-crosslinking during its synthesis, the starch-SC-CB hybrid filler produced the most dense matrix, which improved the anti-gas transmittance property. The composites with the hybrid fillers had better anti-swelling properties as compared to the neat SSBR composite, which was due to the hydrophilicity of silica and starch.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.236-237
• /
• 2005

To measure surface roughness and smoothness of semiconducting materials in power cable, we have investigated the formation and growth process of carbon black showed by changing the content of carbon black. The specimens were primarily kneaded in material samples of pellet form for 5 minutes on rollers ranging between 70[$^{\circ}C$] and 100[$^{\circ}C$]. Then they were produced as sheets after pressing for 20 minutes at 180[$^{\circ}C$] with a pressure of 200[kg/cm]. The contents of conductive carbon black were the variable, and their contents were 20, 30 and 40[wt%], respectively. The surface roughness and smoothness of specimens were measured by SEM and AFM. From SEM experimental result, carbon black in specimens formed matrix as a particles. Also we showed growth process of carbon black according to an increment of the content of carbon black. From AFM experimental result, surface roughness of specimens decreased according to an increment of the content of carbon black.

• 한국전기전자재료학회논문지
• /
• 제22권3호
• /
• pp.257-261
• /
• 2009

In this study, we have researched the optimum design method of the lenticular lens sheet for 3D displays on a TFT-LCD panel, to offer a more stable stereoscopic image, improved 3D quality, and a wider viewing zone. Especially, we have defined the viewing zone width (a parameter denoted as Z) to apply it to the optimum design. The results of this new design method have been compared with the existing design method. As a result, it is revealed that the proposed design method improves the stereoscopic image quality by reducing the black matrix zone width.

• 한국진공학회지
• /
• 제19권1호
• /
• pp.28-35
• /
• 2010

플라즈마 디스플레이 패널에서 명실콘트라스트(bright room contrast ratio: BRCR)를 개선하는 방향으로 새로운 전극구조를 설계하였다. 새로운 개념의 전극을 이용하여 블랙매트릭스 패턴의 영역을 넓힐 수 있었으며 이를 통하여 패널면의 반사휘도를 낮출 수 있었다. 제작한 플라즈마 디스플레이 패널에 대하여 방전전압, 방전효율, 휘도 등을 평가하였으며 명실콘트라스트가 크게 개선됨을 확인하였다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제19권1호
• /
• pp.1-21
• /
• 2015

This paper presents two algorithms based on the Jamshidian equation which is from the Black-Scholes partial differential equation. The first algorithm is for American call options and the second one is for American put options. They compute numerically free boundary and then option price, iteratively, because the free boundary and the option price are coupled implicitly. By the upwind finite-difference scheme, we discretize the Jamshidian equation with respect to asset variable s and set up a linear system whose solution is an approximation to the option value. Using the property that the coefficient matrix of this linear system is an M-matrix, we prove several theorems in order to formulate a bisection method, which generates a sequence of intervals converging to the fixed interval containing the free boundary value with error bound h. These algorithms have the accuracy of O(k + h), where k and h are step sizes of variables t and s, respectively. We prove that they are unconditionally stable. We applied our algorithms for a series of numerical experiments and compared them with other algorithms. Our algorithms are efficient and applicable to options with such constraints as r > d, $r{\leq}d$, long-time or short-time maturity T.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.999-1005
• /
• 2011

고무복합재료에 대해 변형에 의한 결정화(SIC)가 기계적 특성에 미치는 영향을 연신율(${\lambda}$) 및 다중벽 탄소나노튜브(CNT)와 카본블랙(CB)의 함유량을 함수로 하여 연구하였다. 시차 주사 열량(DSC) 분석을 통해 CB 및 CNT의 함유량에 따라 결정화 정도가 증가함을 확인 하였다. 또한 연신율이 증가함에 따라 복합재료의 유리전이온도(Tg)는 증가하였고, 결정화 잠열 값(LHc)은 ${\lambda}$=1.5에서 최대값을 보였다. CNT의 함유량 증가에 따라 기계적 특성과 LHc는 비례관계임을 확인하였다. 열 중량 분석(TGA)을 통해 기지의 소실율은 94.3%였고, 복합재료의 소실율은 보강재의 함유량 증가에 따라 감소하였다. 인장탄성율 비는 고무 내의 CNT 배향으로 인장강도 비보다 높게 나타났다.

• 한국전기전자재료학회논문지
• /
• 제36권6호
• /
• pp.603-608
• /
• 2023

Carbon black with high purity and excellent conductivity is used as a conductive filler in the semiconductive compound for EHV (Extra High Voltage) power cables of 345 kV or higher. When carbon black and CNT (carbon nanotube) are applied together as a conductive filler of a semiconductive compound, stable electrical properties of the semiconductive compound can be maintained even though the amount of conductive filler is significantly reduced. In EHV power cables, since the semi-conductive layer is close to the conductor, stable electrical characteristics are required even under high-temperature conditions caused by heat generated from the conductor. In this study, the theoretical principle that a semiconductive compound applied with carbon black and CNT can maintain excellent electrical properties even under high-temperature conditions was studied. Basically, the conductive fillers dispersed in the matrix form an electrical network. The base polymer and the matrix of the composite, expands by heat under high temperature conditions. Because of this, the electrical network connected by the conductive fillers is weakened. In particular, since the conductive filler has high thermal conductivity, the semiconductive compound causes more thermal expansion. Therefore, the effect of CNT as a conductive filler on the thermal conductivity, thermal expansion coefficient, and volume resistivity of the semiconductive compound was studied. From this result, thermal expansion and composition of the electrical network under high temperature conditions are explained.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1322-1325
• /
• 2005

The main objectives of this research work are to develop conductive glass fiber woven roving and carbon fiber unidirectional fabric composite materials and to determine their electromagnetic shielding effectiveness(EMSE). Epoxy is the matrix phase and glass, carbon fiber are the reinforcement phase of the composite material. Carbon black are incorporated as conductive fillers to provide the electromagnetic shielding properties of the composite material. The amount of carbon black in the composite material is varied by changing the carbon black composition, woven roving and unidirectional (fabric) structure. The EMSE of various fabric composites is measured in the frequency range from 300MHz to 800MHz. The variations of EMSE of woven roving and unidirectional composites with fabric structure, metal powder composite are described. Suitability of conductive fabric composites for electromagnetic shielding applications is also discussed.

• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.952-957
• /
• 1997

Modified polymeric composite electrodes having highly dispersed CuO particles through the electrode matrix were prepared for LCEC or flow injection analysis of carbohydrates. The composite electrodes were prepared by incorporating carbon black and highly dispersed copper oxide particles in polystyrene matrix cross-linked with divinylbenzene. The analytical characteristics of the electrodes for LCEC and flow injection analysis of carbohydrates were evaluated. Improved performance in LCEC and flow injection analysis of carbohydrates is demonstrated in terms of sensitivity, reproducibility, stability and surface renewability. It was possible to get improved performance of the electrodes as well as adaptability of the electrodes for practical applications by employing highly dispersed catalyst particles through the electrode matrix and robust polymeric electrode matrix.