• 한국가구학회지
• /
• 제21권3호
• /
• pp.237-247
• /
• 2010

This research was carried out to examine the properties of black charcoal board, in order to find the proper manufacturing condition for the black charcoal-board made of the charcoal. The charcoal in this study was distillated from domestic wood waste, and it were also the purpose of this study to see if the black charcoal-board has the advantageous properties of charcoal as a well-being building material against the sick house problem. Domestic wood waste was consisted of MDF 40%, PB 30%, plywood 15% and wood 15%, respectively. Black charcoal board was produced by hot pressing with following conditions; temperature $170^{\circ}C$, three stage pressing cycle of $40-10-40\;kgf/cm^2$(1min.-2.5min.-5min.) and non formaldehyde adhesives [P15%+M5%:MDI(M), poly vinyl acetate emulsion(P). Fine mixed particle size [#6-12(16.9%), #12-18(16.7%), #12-40(47.2%), #40-60(9.5%), #60-100(5.9%), less than #100(3.8%)] gave better results than larger particle size [over #6(33.8%), #12-18(17.7%), #12-40(37.7%), #40-60(6.4%), #60-100(2.6%), less than #100(1.8%)]. Final moisture content of the mat was best at 36%. Black charcoal-board showed less MOR and IB(internal bond), more WA(water absorption) than that of white charcoal-board. Black charcoal board showed not only the same gas adsorption and dimensional stability as white charcoal board but also good cutting, nailing and drilling for indoor environment systems.

• 농업과학연구
• /
• 제37권2호
• /
• pp.267-270
• /
• 2010

This study was carried out to manufacture black charcoal board from domestic wood waste by using serum protein adhesive which is natural, environment-friendly and human-friendly. For the preparation of the serum protein adhesive, pig blood from slaughterhouse was centrifuged and serum was separated from corpuscles and concentrated to 30% by dry weight basis. The particle size of charcoal from domestic wood waste for this study was #6-60. Hot pressing schedule was $170^{\circ}C$ and 40kgf/$cm^2$ (1 min)-10kgf/$cm^2$ (2.5 min)-40kgf/$cm^2$ (5 min). The black charcoal board made by the addition of 13% serum protein adhesive on dry weight basis gave 41.76kgf/$cm^2$ of bending strength, 8.12kgf/$cm^2$ of internal bonding strength, and excellent gas adsorption and workability.

• 한국가구학회지
• /
• 제22권1호
• /
• pp.13-17
• /
• 2011

Recently, interest in indoor air quality is increasing. Especially, radon radioactivity among the indoor air is a well-known risk factor for lung cancer because of ionizing radiation in the form of ${\alpha}$-particles. This study was carried out to investigate effect of black charcoal and activated carbon for reduction of radon radiation that emitted from building materials. Black charcoal and activated carbon were used as a barrier which was against the infiltration of radon. The source of radon was gypsum board. Two types of charcoal barrier were powder- and board-type with 5 mm, 10 mm thickness respectively. The method for this determination is evaluated radon concentration in chamber. The measurements were performed with radon detector, SARAD3120. Results of this study are as following: Black charcoal and activated carbon confirmed the highly efficient barrier. Radon concentration was reduced from 72% to 85% as compared the control chamber. Radon reduction capability, however, was no difference as barrier's types. Results obtained in ventilation condition, radon concentration shows 5.93 pCi/L on average in the closed condition and shows 2.69 pCi/L in the opened condition.

• Journal of the Korean Wood Science and Technology
• /
• 제41권1호
• /
• pp.64-76
• /
• 2013

이 연구에서는 녹차-목재섬유 복합보드의 강도성능과 기능성을 보강한 건축내장재를 개발하기 위하여, 목재섬유에 녹차와 흑탄, 백탄, 활성탄 등 3종류의 숯을 혼합한 녹차-숯-목재섬유 복합보드를 제작하였고, 구성원료의 종류 및 그 배합비율이 복합보드의 정역학적 성능에 미치는 영향을 조사하였다. 녹차-숯-목재섬유 복합보드의 휨 강도성능은 백탄함유 복합보드에서 평균적으로 가장 높은 값을 나타내었으나, 숯의 종류에 따른 휨 강도성능의 차이는 크지 않았다. 그러나 그 값은 선행연구의 녹차-목재섬유 복합보드보다 현저한 휨 강도성능의 향상을 나타내었고, 녹차와 숯의 배합비율이 증가할수록 휨 강도성능의 감소가 확인되었다. 바인더로 사용된 요소수지의 종류에 따른 차이는 $E_1$급 요소수지를 사용한 복합보드가 $E_0$급 요소수지를 사용한 그것보다 높은 휨 강도성능을 나타냈지만, 양 수지간의 차이는 선행연구의 녹차-목재섬유 복합보드에 비해 현저히 감소하였다. 복합보드의 박리강도는 백탄 $$\geq_-$$ 활성탄 > 흑탄함유 복합보드의 순이었고, 백탄함유 복합보드에서는 목재섬유로만 구성된 대조보드와 거의 비슷한 값을 나타내는 것이 확인되었다.

• 농업생명과학연구
• /
• 제46권6호
• /
• pp.75-86
• /
• 2012

이 연구에서는 녹차-목재섬유 복합보드에 강도성능과 기능성을 보강한 건축내장재를 개발하기 위하여 목재섬유에 녹차와 3종류의 숯을 혼합한 녹차-숯-목재섬유 복합보드를 제작하였고, 구성원료의 종류 및 그 배합비율이 복합보드의 동적탄성률에 미치는 영향을 조사하였다. 또한, 동적탄성률을 이용하여 비파괴적으로 정적 휨강도성능을 예측하였다. 녹차-숯-목재섬유 복합보드의 동적탄성률은 백탄함유 복합보드에서 전체적으로 약간 우수하였으나, 숯의 종류에 따른 차이는 크지 않았다. 녹차와 숯의 배합비율이 증가할수록 복합보드의 동적탄성률의 감소하였다. $E_1$급 요소수지를 사용한 복합보드가 $E_0$급 요소수지를 사용한 그것보다 높은 동적탄성률을 나타내었으나, 양수지간의 차이는 녹차-목재섬유 복합보드에 비해 현저히 적었고, 녹차-목재섬유 복합보드보다 현저한 동적탄성률의 향상을 나타내는 것이 확인되었다. 복합보드의 동적탄성률과 정적 휨 강도성능사이에 대부분 1%의 신뢰수준의 상관관계가 확인되어, 동적탄성률로부터 정적 휨 강도성능이 예측이 가능하였다.