• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.116-123
• /
• 1999

of a block if the method uses the quantization parameter depending on the bitrate control, and consequently it influence the image quality of video. In this paper, we propose a new method using the following three steps : calculating an averaging (Average of Sum, AS) value in each pixel's block of images, earning an average value of differences between each pixels and As (Differential Averaging Block Pixels, DABP), and finally achieving an improved coefficient values by the DABP and DCT coefficients. Simulation results show that the quality of moving picture could be improved by the proposed method.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.107-110
• /
• 2016

In this paper, an IEEE 802.15.4 LR-WPAN 868/915 MHz ZigBee transceiver for IoT systems was designed and implemented. Non-coherent demodulation was exploited to satisfy ${\pm}80ppm$ frequency offset recommended in IEEE 802.15.4 LR-WPAN. Variable bitrate was supported according to operation modes. SPI module was embedded to connect various MCUs. The designed Zigbee transceiver was described in Verilog HDL and it was synthesized and verified in $0.18{\mu}m$ process. Its gate count was about 32,000 gates.

• Journal of Information Processing Systems
• /
• v.11 no.3
• /
• pp.483-494
• /
• 2015

High Efficiency Video Coding (HEVC) is the most recent video codec standard of the ITU-T Video Coding Experts Group and the ISO/IEC Moving Picture Experts Group. The main goal of this newly introduced standard is for catering to high-resolution video in low bandwidth environments with a higher compression ratio. This paper provides a performance comparison between HEVC and H.264/AVC video compression standards in terms of objective quality, delay, and complexity in the broadcasting environment. The experimental investigation was carried out using six test sequences in the random access configuration of the HEVC test model (HM), the HEVC reference software. This was also carried out in similar configuration settings of the Joint Scalable Video Module (JSVM), the official scalable H.264/AVC reference implementation, running on a single layer mode. According to the results obtained, the HM achieves more than double the compression ratio compared to that of JSVM and delivers the same video quality at half the bitrate. Yet, the HM encodes two times slower (at most) than JSVM. Hence, it can be concluded that the application scenarios of HM and JSVM should be judiciously selected considering the availability of system resources. For instance, HM is not suitable for low delay applications, but it can be used effectively in low bandwidth environments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.2
• /
• pp.408-427
• /
• 2011

Intensive computational complexity is an obstacle of enabling multiview video coding for real-time applications. In this paper, we present a fast macroblock (MB) mode selection algorithm for B frames which are based on the computational complexity analyses between the MB mode selection and reference frame selection. Three strategies are proposed to reduce the coding complexity jointly. First, the temporal correlation of MB modes between current MB and its temporal corresponding MBs is utilized to reduce computational complexity in determining the optimal MB mode. Secondly, Lagrangian cost of SKIP mode is compared with that of Inter $16{\times}16$ modes to early terminate the mode selection process. Thirdly, reference frame correlation among different Inter modes is exploited to reduce the number of reference frames. Experimental results show that the proposed algorithm can promote the encoding speed by 3.71~7.22 times with 0.08dB PSNR degradation and 2.03% bitrate increase on average compared with the joint multiview video model.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.9
• /
• pp.3146-3158
• /
• 2014

Efficient depth map coding is very crucial to the multi-view plus depth (MVD) format of 3-D video representation, as the quality of the synthesized virtual views highly depends on the accuracy of the depth map. Depth map contains smooth area within an object but distinct boundary, and these boundary areas affect the visual quality of synthesized views significantly. In this paper, we characterize the depth map by an auto-covariance analysis to show the locally anisotropic features of depth map. According to the characterization analysis, we propose an efficient depth map coding scheme, in which the directional discrete cosine transforms (DDCT) is adopted to substitute the conventional 2-D DCT to preserve the boundary information and thereby increase the quality of synthesized view. Experimental results show that the proposed scheme achieves better performance than that of conventional DCT with respect to the bitrate savings and rendering quality.

• Journal of KIISE:Software and Applications
• /
• v.29 no.7
• /
• pp.425-435
• /
• 2002

This paper introduces a macroblock-based rate control algorithm using the neural classifier based in Self Organization feature Maps (SOFM). In contrast to the conventional rate control methods based on the mathematical rate distortion (RD) model and the feedback regression, proposed method can actively adapt to the rapid-varying image characteristics by establishing the global model for bitrate control and by using the SOFM based neural classifier to manage that model. Proposed rate control algorithm has 0.2 dB ~ 0.6 dB better performances than MPEG-4 macroblock-based rate control algorithm by evaluating with the encoded Peak Signal to Noise Ratios while maintaining similar overall computational complexity.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.11a
• /
• pp.77-80
• /
• 2018

360 VR 콘텐츠는 기존의 선형적인 일반 영상에 비해 사용자에게 더 많은 정보와 높은 몰입감을 제공할 수 있어 의학, 군사, 교육, 게임 등 다양한 분야에서 활용되고 있다. 최근에는 모바일 기기의 성능 향상과 통신기술의 발달에 힘입어 모바일 네트워크를 사용한 360 VR 콘텐츠 소비가 증가하는 추세이다. 모바일 네트워크는 대역폭이 한정적이고 가변적인 특성이 있어 이를 통해 용량이 큰 360 VR 콘텐츠 전송 시 초기 접속 지연 및 재생 끊김이 발생하여 사용자의 만족도를 감소시킬 수 있다. 이에 본 논문은 위에 언급한 문제를 해결하기 위해 360 VR 콘텐츠 전송 시 전체 요구대역폭을 감소시키고 사용자 초기 접속 속도를 향상시키는 것을 목표로, 360 VR 콘텐츠의 지오메트리 값과 사용자의 요(i.e. yaw)값을 활용하여 각도 기반으로 사용자의 현재 시점에 해당하는 타일을 확인하고 해당 타일에 높은 비트율을 할당하는 방법 및 웹 기반 전송에 대해 연구 개발하였다. 이를 위하여 웹 기반 3D 렌더링 API 인 WebVR API, HTTP Adaptive Streaming 기술의 표준 MPEG-DASH의 dash.js API를 활용하여 개발하고, 성능 확인 실험을 통해 요구대역폭 감소, 클라이언트 접속 속도 향상을 제시한다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4587-4605
• /
• 2019

High Efficiency Video Coding (HEVC) suffers from high computational complexity due to its quad-tree structure in motion estimation (ME). This paper exposes an adaptive search range decision algorithm for accelerating HEVC integer-pel ME on GPU which estimates the optimal search range (SR) using a MAP (Maximum A Posteriori) estimator. There are three main contributions; First, we define the motion feature as the standard deviation of motion vector difference values in a CTU. Second, a MAP estimator is proposed, which theoretically estimates the motion feature of the current CTU using the motion feature of a temporally adjacent CTU and its SR without any data dependency. Thus, the SR for the current CTU is parallelly determined. Finally, the values of the prior distribution and the likelihood for each discretized motion feature are computed in advance and stored at a look-up table to further save the computational complexity. Experimental results show in conventional HEVC test sequences that the proposed algorithm can achieves high average time reductions without any subjective quality loss as well as with little BD-bitrate increase.

• ETRI Journal
• /
• v.44 no.1
• /
• pp.38-50
• /
• 2022

This paper presents a study on the use of encoder-derived features in decoder-side depth estimation. The scheme of multiview video encoding does not require the transmission of depth maps (which carry the geometry of a three-dimensional scene) as only a set of input views and their parameters are compressed and packed into the bitstream, with a set of features that could make it easier to estimate geometry in the decoder. The paper proposes novel recursive block splitting for the feature extraction process and evaluates different scenarios of feature-driven decoder-side depth estimation, performed by assessing their influence on the bitrate of metadata, quality of the reconstructed video, and time of depth estimation. As efficient encoding of multiview sequences became one of the main scopes of the video encoding community, the experimental results are based on the "geometry absent" profile from the incoming MPEG Immersive video standard. The results show that the quality of synthesized views using the proposed recursive block splitting outperforms that of the state-of-the-art approach.

• Journal of Broadcast Engineering
• /
• v.2 no.2
• /
• pp.206-215
• /
• 1997

We pror.a;e a H.263-based video ceder with two-layer ocalability. The bare layer is ceded by using the default H.263 axling algorithms to achieve high compresred video data and the enhanced layer is axied by enhanced axling such as HVS-based quantization updating. The enhanced layer contains only arled refinement data for the OCT coefficients of the bare layer. Bitstream syntax and semantics for enhancement layer are designed and quantizer design using the HVS is pror.ooed. Data from the two layers are combined after inverse quantization and inverse OCT prcx:esses in the deaxier. We show with e~rirrental results that the pror.a;ed layered arlee achieves comparable picture quality with non-layered arlee at bitrates of 30 kbr;s or less. Overhead information for the bitstream layer can 00 limited to less than 0.5 kbits/frame.