• Journal of Oral Medicine and Pain
• /
• 제25권1호
• /
• pp.117-128
• /
• 2000

The present study explored the influence of temporomandibular disorders(TMD) with anterior open bite on swallowing. Fifteen subjects with anterior open bite(group A), 9 subjects with anterior open bite and TMD(group B), and 24 subjects without malocclusion or TMD symptoms (group C) were included. BioPAK system(Bioresearch Inc., Milwaukee, WI, USA) was used to record the muscle activities of anterior temporal, masseter, sternocleidomastoid(SCM) and anterior digastric muscles during maximum clenching and swallowing. Positional change of the mandible during swallowing was also recorded using the same system. The obtained results were as follows: 1. Group A, B, and C did not show significant differences each other in the muscle activity of resting position in most of head and neck muscles. 2. Group B showed significantly lower muscle activity in maximum clenching than group C in anterior temporal(p<0.01), masseter(p<0.05), SCM(p<0.05) and digastric muscles(p<0.05). 3. Group A showed significantly lower muscle activity during swallowing than group C in anterior temporal and masseter muscles(p<0.01). Group B showed significantly lower muscle activity during swallowing than group C in anterior temporal(p<0.01), masseter(p<0.01), and SCM muscles(p<0.05). 4. Group A and B showed increased positional change of the mandible during swallowing measured from vertical, anteroposterior and lateral aspects, and prolonged swallowing(p<0.05). 5. After given instructions for normal swallowing pattern, group A and B showed increased muscle activity during swallowing in anterior temporal, masseter and SCM muscles(p<0.01). Positional change of the mandible and time elapsed for swallowing also decreased after the instruction(p<0.01). 6. Occlusal splint did not change the muscle activity during swallowing. However, vertical change(p<0.01) and swallowing time(p<0.05) were decreased with splint.

• 대한치과교정학회지
• /
• 제30권1호
• /
• pp.91-99
• /
• 2000

본 연구는 조선대학교 치과대학 부속치과병원 교정과에 내원한 환자 중 악태모형을 제작하고 CPI (condylar position indicator) 에 의한 하악과두의 위치를 평가하여 중심위 -중심교합 편위양이 전후방 및 수직적으로 1.0 mm 이내, 측방으로 0.3 mm 이내인 정상 범주를 벗어나는 성인 여자 환자 16명을 대상으로 교합안정장치를 3개월간 장착하고, 이들을 장착 기간에 따라 장착 직전, 장착 1개월 후, 장착 2개월 후, 장착 3개월 후로 분류하여 교합안정장치의 장착에 따른 교합력과 교합접촉점 수의 변화 여부를 평가하기 위해 T-scan system을 이용하여 다음과 같은 결론을 얻었다. 1. 교합력의 변화는 교합안정장치 장착 직전에서 장착 1개월 후 사이에 유의성 있게 감소되었다 (P<0.05). 2. 교합력의 변화는 교합안정장치 장착 1개월 후부터 장착 3개월 후 까지는 유의한 차이를 보이지 않았다 (P>0.05). 3. 전치부 교합접촉점 수의 변화는 장착기간에 관계없이 유의성있는 차이가 없었다 (P>0.05). 4. 구치부 교합접촉점 수의 변화는 교합안정장치 장착 직전에서 장착 1개월 후 사이에 유의성 있게 감소되었다 (P<0.05). 5. 구치부 교합접촉점 수의 변화는 교합안정장치 장착 1개월 후부터 장착 3개월 후 까지는 유의한 차이를 보이지 않았다 (P>0.05). 6. 교합접촉점 수의 변화는 전치부에서 보다는 구치부에서 절대적으로 영향을 미쳤다. 이상을 종합해볼 때, 교합안정장치는 장착 1개월 후면 어느정도 중심위로의 하악골 안정을 기대할 수 있을것으로 사료된다.

• 대한소아치과학회지
• /
• 제21권2호
• /
• pp.577-585
• /
• 1994

The Twin Blocks technique was developed by Dr. William Clark of Scotland during the early 1980's. Twin Blocks are an uncomplicated system that incorporates the use of upper and lower bite blocks. These blocks reposition the mandible and redirect occlusal forces to achieve rapid correction of malocclusions. They are also comfortable and the patients wear them full-time-inducing eating time. Occlusal forces transmitted through the dentition provide a constant proprioceptive stimulus to influence the rate of growth and the trabecular structure of the supporting bone. The features of Twin Blocks mean easier and quicker treatment. The occlusal inclined plane is the fundamental functional mechanism of the natural dentition. Twin blocks are bite blocks that effectively modify the occlusal inclined plane to induce favorably directed occlusal forces by causing a functional mandibular displacement. Upper and lower bite blocks interlock at a $45^{\circ}$ angle and are designed for full-time wear to take advantage of all functional forces applied to the dentition including the forces of mastication. The patients who were treated with modified Twin Blocks, and following results were observed: 1. Large overjet and deep overbite were corrected. 2. Class II molar relationship was changed into Class I. 3. Labial inclination of upper incisors was corrected by adjustment of labial bow of upper bite block. 4. The profiles of two patients were improved by anterior displacement of mandible.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.457-462
• /
• 2007

This paper reports on the research which investigates acoustic signals acquired in turning with rough and finish simultaneously. The material is aluminum thin pipe. Two acoustic sensors were set on CNC machine. One was set on the finish bite and the other the rough. Two signals were first analyzed in order to consider how much the acoustic signal from the finish bite was coupled by that from the rough. A simple data collecting system to acquire signals from the finish was then determined because two acoustic signals were little coupled. Second the fundamental experiments were accomplished to study the effects of machine vibration and material state. The signal characteristics due to surface defects were studied from the collected acoustic signal data. The signal analysis was based on real time data, root mean squared average and frequency spectrum by fast fourier transform. As a result, the acoustic signals were made effects by machine condition, material structure. The acoustic signal from the finish bite was closely correlated with surface quality. Two types surface micro defects were then evaluated by the signal characteristics.

• 대한치과교정학회지
• /
• 제12권1호
• /
• pp.37-43
• /
• 1982

The patient,20 year-old female, complained of anterior open bite. She had tongue thrusting habit and suffered from maxillary sinusitis since 12-years old. Cephalometric analysis revealed slightly forward relationship in maxilla, but normal in mandible. The anterior open bite was corrected through retraction and extrusion of anterior segment and mesial movement of posterior segment under multibanded system after extraction of 4-first premolars. After 2 years and 3 months, she gained ideal overbite, overjet and good interdigitation of buccal segment.

• 대한치과보철학회지
• /
• 제32권4호
• /
• pp.484-514
• /
• 1994

Cantilever bridge is widely used by mny clinicians, but its worst mechanical character, so called Class I lever system, makes dentists hesitate to restore the missing tooth with it. Therefore it is important to study stress of the cantilever bridge. In this study, two models of cantilever bridges that restores the missing mandibular second molar with two abutment teeth were constructed. One model was a type of cantilever bridge supported by a normal alveolar bone, the other one was supported by an alveolar bone resorbed to its 1/3 of root length. Maximum bite force(550N) and funtional maximum bite force(300N) were vertically applied to the distal end of the pontic, distal 1/3, and distal half of the pontic. And each force was also applied to centric occlusal contacts as a distributed force. Total 16 loading cases were compared and analyzed with 3-dimensional finite element method. The results were as follows: 1. The stress was concentrated on the joint of the pontic and the retainer, grooves, and distal cervical margin of the posterior retainer. 2. In case of maximum bite force(550N) at the end of the pontic, the risk of fracture at the joint of the pontic and the retainer was high. 3. In case of distributed force in centric occlusion and functional maximum bite force(300N), the stresses were less than the yield strength of the type VI gold for any loading cases. 4. In case of alveolar bone resorption, the occlusal force to the cantilever pontic caused more stress on the root apex and less stress on the alveolar crest region of the distal surface of the posterior abutment. 5. In case of alveolar bone resorption, the displacement was larger than that of normal alveolar bone in all loading cases.

• 대한치과보철학회지
• /
• 제22권1호
• /
• pp.85-94
• /
• 1984

The purpose of this study was to investigate treatment effectiveness of TENS and bite plane for bruxism and TMJ dysfunction patients. The electromyograms were made on males aged 23 to 25 with sound stomatognathic system, 5 males bruxism aged 24 to 27, and 1 male and 4 females TMJ dysfunction patients (right TMJ pain) aged 14 to 33. The electromyographic study was limited to the middle of masseter muscle and anterior temporal muscle. The electromyographic study was carried out with 8-channel EM2 (Myotronics Research Inc.) and was taken 5 mandibular positions of clinical rest position, clench intercuspal position, clench protruded, cluch right, clench left. The 2 pairs of surface electrodes were used exactly, with the ear lobe as reference point. The recording were subjected to determine the mean voltage. The results were as follows; 1. In the clinical rest position, the muscle activities of bruxism and TMJ dysfunction patients were higher than those of normal at the before treatment, but that were lower or similar to those of normal at the TENS after and after bite plane wearing. 2. In the clench I.C.P., the muscle activities of TMJ dysfunction patients were decreased as the order of the before treatment, after TENS, after occlusal bite plane wearing, but those of bruxism were irregular. 3. In the clench right and the clench left, the muscle activities of the middle of masseter muscle of the non-working side of bruxism were higher than those of the working side at the before treatment and after TENS, but the muscle activities of after occlusal bite plane wearing were similar to those of the normal. 4. In the clench right and the clench left, the muscle activities of the middle of masseter muscle and anterior temporal muscle of the working side of TMJ dysfunction patients were higher than those of non-working side as like the normal at the before treatment, after TENS, and after occlusal bite plane wearing.

• 대한치과교정학회지
• /
• 제26권1호
• /
• pp.95-104
• /
• 1996

본 연구의 목적은 T-Scan system과 근전도를 이용하여 정상교합자와 과개교합자의 최대교합력과 근활성도간의 상관관계를 조사하기 위함이다. 연구대상은 두 집단으로 구성 되었다. 한 집단은 20명의 정상교합자이고 다른 집단은 30명의 과개교합자이다. 과개교합자는 Class I deepbite(9명의 남자와 7명의 여자)와 Class II div. 1 deepbite(8명의 남자와 6명의 여자)로 구성되었다. 이 연구로부터 얻어진 결과는 다음과 같다. 1. 최대교합력은 정상교합군에서 155.93 N, I급 과개교합군에서 165.11 N, II 1류 과개교합군에선 111.55 N이었으며, II급 1류 과개교합군의 최대교합력은 정상교합군에 비해 유의성 있게 낮았다(P<0.01). 2. 정상교합군과 과개교합군 모두에서 치야접촉점이 증가할수록 교합력은 증가하였다(표 3). 3. 최대교합시 II급 1류 과개교합군의 교근 및 전측두근의 근활성도는 전상교합군에 비해 현저히 낮았고(P<0.01),모든 군에서 교근의 활성도가 전측두근보다 높았다(P<0.05). 4. 모든 군에서 교합력과 근활성도, 치아접촉점의 수와 근활성도는 높은 상관관계를 보였다(표 5).

• 대한치과교정학회지
• /
• 제18권2호
• /
• pp.475-488
• /
• 1988

Certain malocclusion are associated with specific "facial type," and it is important for the clinician to classify the common facial characteristic of each patient. Because the reaction to treatment mechanics and the stability of the denture is depended upon the analysis of the facial pattern. Basically, there are 3 district facial types or patterns under which almost all malocclusion can be classified. 1. mesofacial is the most average growth. 2. brachyfacial which is a horizontal growth pattern has a week muscle, with dental arch, deep bite. 3. dolichofacial which is a vertical growth pattern has a strong muscle, narrow dental arch, open bite. Brachyfacial pattern show a resistant to mandibular rotation during treatment can accept a more protrusive denture and are prominantly nonextraction, whereas dolichofacial patterns tend to open during treatment require a more retracted denture in order to assure post-treatment stability. Brachyfacial pattern would better treat to use extrusive force system, whereas dolichofacial pattern treat to use intrusive force system with head gear and intermaxillary elastics.

• 대한치과보철학회지
• /
• 제46권6호
• /
• pp.591-601
• /
• 2008

STATEMENT OF PROBLEM: The improvement in oral function and comfort from the dental implant appears to depend on the particular type of implant support used with the denture. The number and positioning of implants have an influence on the force transfer and subsequent stress distribution around implants. Nevertheless, a quantitative comparison has not been made between the types of implant prosthesis used with different materials compared to conventional complete denture. PURPOSE: The objective of this study is to assess the masticatory performance, bite force and impact of two different type of implant supported prostheses on oral health-related quality of life compared to conventional complete denture with GOHAI, validated oral-specific health status measures, the sieving method, and the Prescale Dental System. MATERIAL AND METHODS: From the years 1999 to 2006, a total of 30 completely edentulous patients in a single arch were selected from the Yonsei University Dental Hospital, Department of Prosthodontics and Implant Clinic in Seoul, S. Korea. Patients were divided into 3 groups of 10 each. Group HR was restored with fixed-detachable hybrid prostheses with resin teeth. Group FP had fixed dentures with porcelain teeth while Group CD had a complete denture. The masticatory performance was compared between 3 groups. RESULTS: The results showed a significant improvement in oral health-related quality of life with dental implants compared to a conventional denture in GOHAI comparison. Overall, implant prostheses showed a higher masticatory performance ($S_{50}$) and maximum bite force compared with conventional dentures (P < .05) but no differences between different implant supported prostheses (P > .05). CONCLUSION: Within the limitation of this study, the numbers of implant and material of implant prostheses does not appear to impact patient satisfaction, masticatory performance or bite force.