• Applied Chemistry for Engineering
• /
• v.7 no.2
• /
• pp.387-392
• /
• 1996

Natural zeolite/epoxy resin composites were prepared and the cure kinetics was studied by dynamic DSC analysis. With the increments of natural zeolite content, the reaction starting temperature and the exothermic peak temperature were decreased. When diglycidyl ether of bisphenol A(DGEBA)/4,4'-methylene dianiline(MDA)/malononitrile(MN, 10phr) was filled with 20phr of zeolite, DSC thermogram had one peak and when it was filled with 30phr of zeolite, a shoulder appeared on the DSC thermogram. With the filling of 40phr of zeolite, DSC thermogram was separated into two peaks and the activation energy of the first peak, $Ea_1$ was 12.30 kJ/mol and that of the second peak, $Ea_2$ was 12.70 kJ/mol.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.691-698
• /
• 2001

Nanocomposites based on epoxy acid nanoclay were prepared employing organically modified mica type silicate (OMTS), diglycidyl ether of bisphenol A (DGEBA) type epoxy. curing agent (dicyandiamide; DICY), and catalyst (benzyl dimethyl amine; BDMA). Both melt mixing and solution mixing were und for the sample preparation and structural developments with curing reaction were analyzed using X-ray diffractometer (XRD) and small angle X-ray scattering (SAXS). Because of the different curing rate between extra-gallery and intra-gallery reactions of epoxy mixtures, only intercalated structure was observed for the sample prepared by melt mixing while fully exfoliated structure was observed for the sample prepared by solution mixing. Mechanical properties of exfoliated epoxy nanocomposite were investigated using a dynamic mechanical analyzer (DMA). The dynamic storage modulus of the nanocomposite in both glass and rubbery plateau regions were increased with increasing OMTS contents, but glass transition temperatures ($T_g$) remained unchanged. Thermal properties of epoxy nanocomposite were investigated using thermogravimetric (TGA) and limit oxygen index (LOI) methods. Thermal decomposition onset points and LOI values were increased with increasing OMTS contents due to barrier effects of OMTS sheets.

• Journal of the Korean Institute of Gas
• /
• v.5 no.1
• /
• pp.29-36
• /
• 2001

The permeation properties of $O_2\;and\;N_2$ were measured for bromobisphenol A polysulfone(BPSf), bisphenol A trimethylsilylated polysulfone(TMSPSf) and their blend membrane to investigate the structure-properties relationships. BPSf shows relatively high permselectivity. It can be explained that the strong polarity of bromine in BPSf increases chain packing ability. In this case the distance of polymer chains is reduced by increasing of interchain interaction by induced dipole. TMSPSf shows relatively high permeability. The higher value of permeability coefficients for TMSPSf is due to the substitution of very bulky trimethylsilyl groups. The replacement of phenyl hydrogens of bisphenol A polysulfone(PSf) with trimethylsilyl groups results in higher fractional free volume(FFV). In this work, taking into account the complimentary features of BPSf and TMSPSf, BPSf/TMSPSf blend was prepared and the compatibility in mixing are examined. The BPSf/TMSPSf blend shows higher permeability than commercial PSf, with minimum loss of selectivity. The miscibility of the BPSf/TMSPSf blend is confirmed by the single glass transition temperature.

• Journal of Environmental Health Sciences
• /
• v.29 no.2
• /
• pp.16-22
• /
• 2003

BBP (Butyl benzyl phthalate), a widely used plasticizer. can enter the food and environment as consequence of its manufacture, use, and disposal. BBP was found to be developmental and teratogenic or endocrine disrupting chemical in rats. The effects of BBP were investigated in female rats (P) and second generation (F1) via lactations. Sprague-Dawley were given BBP by oral administration at 0, 5, 10, 100, 1000 mg/kg on day 0 to 21 of lactation period. The results were as follows : At maternal findings, there were some significant changes (p<0.05) in relative organ weight, especially liver and uterus weight by BBP administration. In estrous cycle, high treated group was inclined to be proestrus or estrus compared to control group. BBP indues estrous cycle earlier than the control group. At fetal findings, there were some significant changes in relative liver and spleen weight, especially 100, 1000 mg/kg administered groups. The relative weight of ventral prostate was decreased, so it was represent to dose-response tendency. Parent rats (P) were detected monobenzyl phthalate (MBeP) 3.21~5.81 $\mu\textrm{g}$/ml in 100, 1000 mg/kg dose groups. MBeP of male and female fetuses (F1) were detected at the level of 1.21~2.63 $\mu\textrm{g}$/ml of serum. Male serum concentration oi MBeP was higher than the females'. Estrogen receptor $\alpha$ expression by BBP and bisphenol A in uterus and testis of F1 were studied. The ER$\alpha$ expression were increased in F1 male testis and female uterus. F1 male showed distint ER$\alpha$ expression, especially in the combined exposrue. Synergistic ER$\alpha$ expression was found by combined treatment group of BBP and bisphenol A. From the above results, it could be concluded that the effects of dams and F1 by BBP administration during lactation period were estrogenic, and BBP can transfer to F1 via lactation, and make estrogenic at F1 reproductive organs.

• Applied Chemistry for Engineering
• /
• v.5 no.3
• /
• pp.517-523
• /
• 1994

The effects of cure kinetics and mechanism of DGEBA(diglycidyl ether of bisphenol A)/MDA(4,4'-methylene dianiline) with SN(succinonitrile) and HQ(hydroquinone) as an additive and accelerator were investigated. Cure kinetics was evaluated by Kissinger equation and fractional-life method through DSC analysis. The activation energy has hydroxyl group as an accelerator, the activation energy and the starting cure-temperature were lower than those of DGEBA/MDA/SN system. Cure mechanism of those systems was investigated through FT-IR according to the various SN contents. The ratio was SN : HQ = 4 : 1. It has been known that the cure reactions of an epoxy-diamine system are composed of primary amine-epoxy reaction, secondary amino-epoxy reaction and epoxy-hydroxyl group reaction. But in DGEBA/MDA/SN system, primary amino-CN group reaction and CN group-hydroxyl group reaction were added to the above mentioned reactions. These reactions attributed to the long main chain and the low crossliking density. And in DGEBA/MDA/SN/HQ system, hydroxyl group of HQ formed a transition state with epoxide group and amime group and also opened the ring of the epoxide group rapidly, then amino-epoxy reaction took place easily.

• Journal of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.198-206
• /
• 1975

Polymers with photosensitive functional groups, the naphthoquinone-1,2-diazide-5-sulfonyl esters(PGND, BEND and PVAND) of polyglyceryl phthalate(PG), bisphenol A-epichlorohydrin polycondensate(BE) and polyvinyl alcohol(PVA), were prepared. The molecular weights of the starting materials were determined by the cryoscopic method, i.e., in the range of 650${\sim}$1200 for PG and 780${\sim}$1320 for BE, PGND, BEND and PVAND were prepared by esterification of PG, BE and PVA with naphthoquinone-1,2-diazidie-5-sulfonyl chloride, and the replacements of such a functional groups were confirmed by the infrared absorption spectra and elemental analyses. The good agreement between the observed values of elemental analyses (PGND, BEND and PVAND) and the calculated values, indicated that the degree of polymerization did not change in the course of esterification of PG, BE and PVA.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.787-790
• /
• 2014

In this work, the epoxy specimens were prepared from diglycidyl ether of bisphenol F (DGEBF) with silane coupling agents (3-glycidoxypropyl trimethoxysilane (GPTMS)) in different ratios. Thermal stability was studied in terms of polymer decomposition temperature (PDT), temperature of maximum rate of weight loss ($T_{max}$), integral procedural decomposition temperature (IPDT), and decomposition activation energy ($E_a$) using TGA analysis. Adhesion properties of epoxy composite specimens were measured by UTM (universal testing machine) at atmosphere temperature. In this result, the adhesion properties of DGEBF were improved by addition of silane coupling agents compared to non-treated epoxy resin. However, when the content of GPTMS agent is more than 10 phr, adhesion properties decreased with increasing GPTMS agent.

• Journal of Adhesion and Interface
• /
• v.13 no.4
• /
• pp.163-170
• /
• 2012

Although ${\beta}$-cyclodextrin (${\beta}$-CD) has been used as medicine, agrichemical, food, cosmetic, antioxidant, anti-volatile agent, anti-hygroscopic agent, fading-protecting agent, and emulsifier due to its ability to form inclusion complex by enclosing another molecule (guest molecule), it has been restricted in practical application because of its low solubility in water and organic solvent. In this study, ${\beta}$-CD derivative as a new polyol with inclusion characteristics against Bisphenol A and cyclopropane, foaming agent for polyurethane (PU), and with improved solubility was synthesized, characterized and used to formulate rigid PU foam with better thermal conductivity and compressive strength compared to that from commercial polyols.

• Applied Chemistry for Engineering
• /
• v.32 no.4
• /
• pp.449-455
• /
• 2021

Composite materials are substances that are configured to have excellent physical properties by combining the properties of a single substance, and are in the limelight as materials that exceed the performance of metals and polymers. However, it has the disadvantages of long cycle time and high unit price, and much research is being performed to overcome these disadvantages. In this study, we developed an epoxy resin curing agent that can shorten the time required for mass production of composite materials, and tried to expand the applicability of objections by imparting flame retardancy. The epoxy resin used as a basic substance utilized two types of bisphenol F and resorcinol structure, which was further modified using 9,10-dihydro-9-oxa-10-phosphaphenantrene-10-oxide (DOPO) to impart flame retardancy. Triethylphosphate (TEP) and bis [(5-ethyl-2-methyl-1,3,2-dioxaphosphorinan-5-yl)methyl] methyl phosphonate P,P'-dioxide (FR-001) were used as additives, seven kinds of compositions were blended, thermal characteristics (gelation time, glass transition temperature) and flame retardant performance were evaluated. We successfully developed an epoxy matrix that can be applied to high pressure resin transfer molding (HP-RTM) process.

• Journal of Marine Bioscience and Biotechnology
• /
• v.14 no.2
• /
• pp.61-68
• /
• 2022

This study aimed to investigate the hepatoprotective activities of the sea cucumber products, including extracts and hydrolysates, in vitro and in vivo. Dried sea cucumber, produced on the western coast of Korea, was boiled in water or 70% ethanol at 85℃ or 100℃ for 18 or 24 h, respectively, to extract bioactive compounds. The enzymatic hydrolysates were prepared by reacting the dried sea cucumber with pepsin or neutral protease (PNL) under optimal enzyme conditions. The anti-inflammatory effect of the samples was investigated using RAW 264.7 cells treated with lipopolysaccharide (LPS). The amount of nitric oxide (NO) was produced from the cells treated with LPS and each sample was compared. Therefore, the pepsin hydrolysate treatment decreased NO production compared to LPS sole treatment. Furthermore, the effects of the samples on cell injury in the hepatic cell line and bisphenolA-induced hepatic injury mouse model were investigated. The water extracts and the pepsin hydrolysates of sea cucumber significantly inhibited cell injury generated in the hepatocytes without cytotoxicity (p < 0.05), whereas the ethanol extracts were cytotoxic. However, these results indicate that the extracts and the enzymatic hydrolysates derived from sea cucumber can be used as beneficial materials for inhibiting liver damage.