• Korean Journal of Materials Research
• /
• v.2 no.4
• /
• pp.257-262
• /
• 1992

The cure kinetics of a diglycidyl ether of bisphenol A (DGEBA) with 4, 4'-methylene dianiline (MDA) added succinonitrile was studied through the dynamic run method by applying the data to the Kissinger equation which analyses the effect of the heating rate on the temperature at maximum reaction rate using Differential Scanning Calorimetry (DSC) analyzer in the range of 3$0^{\circ}C$-35$0^{\circ}C$. In the DGEBA/MDA system with SN, the activation energy ($E_a$) and the pre-exponential factor (A) were calculated. From these results, the rate constants (k) were obtained according to the different SN contents.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.05a
• /
• pp.152-157
• /
• 2002

The cure and rheological behavior of Diglycidyl ether of bisphenol F, catalyzed by four kinds of imidazoles and a Nadic methyl anhydride curing agent were studied using a differential scanning calorimeter (DSC) and rheometer. The isothermal traces were employed to analyze cure reaction. The DGEBF/anhydride conversion profiles showed autocatalyzed reaction characterized by maximum conversion rate at 20~40 % of the reaction. The rate constants obtained from isothermal test showed temperature dependance, but reaction order did not. The order of reaction (m+n) was calculated to be close to 3. The measurements of viscosity and relation time in the presence of inorganic fillers were carried out at different isothermal curing temperatures. The viscosity and gelation time increased with filler content at the same isothermal temperature.

• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.145-150
• /
• 1993

Abstract In order to improve the brittleness of diglycidyl ether of bisphenol A(DGEBA)/4, 4'-methylene dianiline(MDA) system, the reactive additive, succinonitrile(SN) was added to DGEBA/MDA system. In this case, thermal properties, glass transition temperature(Tg), thermal decomposition temperature(Td) and 5% weight loss temperature($T_{-5%}$)were investigated according to the different SN contents and cure temperatures. Tg, Td and $T_{-5%}$ decreased as the SN content was increased, but increased as the cure temperature was increased.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.8-13
• /
• 2010

Bisphenol A diglycidyl ether (BADGE) and bisphenol F diglycidyl ether (BFDGE) were obtained by a polymerization reaction of epichlorohydrin (ECH) with bisphenol A (BPA) or bisphenol F (BPF). These compounds are commonly used as monomers or additives such as a polymerization stabilizer and a hydrochloric acid scavenger of epoxy resin, polyvinyl chloride (PVC)-containing organosols and polyester lacquers, that are applied to the internal surface of most canned foods to impart chemical resistance. The unreacted BADGE, BFDGE and their reaction products migrating from epoxy resin, PVC-containing organosol and/or polyester lacquer-based food packaging materials into the foods have recently become an issue of great concern because of increased customer demand for safety. This study was conducted to develop a rapid and sensitive simultaneous analysis method based on HPLC/FLD and HPLC/APCI-mass and to evaluate the concentration of BADGE, BFDGE and their metabolites, BADGE $H_2O$, BADGE $2H_2O$, BADGE HCl, BADGE 2HCl, BADGE HCl $H_2O$, BFDGE $H_2O$, BFDGE $2H_2O$, BFDGE HCl, BFDGE 2HCl and BFDGE HCl $H_2O$ for 133 canned food samples. The method provided a linearity of 0.9997-0.9999, a limit of detection of $0.01-0.13\;{\mu}g/mL$, a limit of quantitation of $0.03-0.44\;{\mu}g/mL$ and a recovery (%) of 85.64-118.18. The number of samples containing BADGE, BFDGE or their metabolites were: 28/133 (21.1%), with levels of 0.400-0.888 mg/kg being observed for aqueous foods (19/133) and 0.093-0.506 mg/kg being observed for oily foods (9/133).

• Environmental Analysis Health and Toxicology
• /
• v.23 no.4
• /
• pp.291-299
• /
• 2008

Bisphenol A diglycidyl ether(BADGE)는 비스페놀 A와 에피클로로하이드린의 축합에 의해 만들어지는 물질로 상업용 액상 에폭시 수지의 주성분이다. 본 연구는 clusterin mRNA 발현이 BADGE의 노출된 생식기계 독성에 연관되어 있는지를 연구하기 위해 수행하였다. BADGE는 SPF Sprague-Dawley 임신 랏트에 임신 6일부터 수유기가지 하루에 한 번 0(대조군)과 375mg/kg/day를 경구 투여하였다. 수컷 새끼는 일반 사항과 몸무게, 일반 발달 지표(예, 항문과 생식기 사이의 거리, 이개개전, 절치붕출, 유두잔류, 안검개열, 고환하강, 포피박리 등)등을 관찰하였다. 대조군과 투여군에서 다섯 마리의 수컷 새끼는 출생 후 3, 6와 9주에 부검하여 부고환의 조직학적 변화 등을 관찰하였다. BADGE 375 mg/kg/day 투여군에서 항문과 생식기 사이의 거리는 대조군보다 길어지는 경향을 보였다. 출생 후 6주와 9주에서 부고환의 상대 무게는 대조군보다 약간 증가하였으나 조직학적인 변화는 관찰되지 않았다. BADGE 투여 군에서 clusterin mRNA 발현량은 대조군에 비해 3주에 56%, 6주에 57% 그리고 9주에 86% 감소하였다. 이런 결과는 랏트의 부고환에서 clusterin은 BADGE에 반응하는 유전자 중 하나일 수 있다는 가능성을 나타낸다.

• Korean Journal of Materials Research
• /
• v.2 no.3
• /
• pp.191-196
• /
• 1992

The new epoxy resin, diglycidyl ether of bisphenol A(DGEBA)/4, 4'-methylene dianiline (MDA)/succinonitrile system, containing the reactive additive succionitrile was investigated through the impact test and the stress-strain test on the basis of the behavior of cure reaction and the cure mechanism. The new epoxy resin system, having the different succinonitrile contents, were cured at $80^{\circ}C$for 1.5 hour and then in order to cure completely at $150^{\circ}C$ for 1 hour. It was shown that as the succinonitrile content increased, impact strength was gradually increased, tensile strength was decreased, almost constantly Young's modulus was sustained and elongation was increased until the succinonitrile content was increased to 10phr, and then decreased. From the experimental results, it can be concluded that the chemical bonding length between the main chains was extended by adding the reactive additive succinonitrile. It was also found that the flexibility of epoxy resin was improved by adding the succinonitrile.

• Journal of Preventive Medicine and Public Health
• /
• v.43 no.2
• /
• pp.131-137
• /
• 2010

Objectives: Bisphenol A diglycidyl ether (BADGE) is a liquid compound obtained by condensation of two molecules of epichlorohydrin with one molecule of bisphenol A. General and reproductive toxicity with BADGE has been reported higher than 1000 mg/kg/day. This study was performed to show the effects of acute exposure to BADGE below 1000 mg/kg/day on the testis in adult male rats. Methods: BADGE was administered by gastric lavage in a single dose of 500, 750, 1000, and 2000 mg/kg/day in 8-week old male SPF Sprague-Dawley rats. The right testis was processed for light microscopic analysis. The left testis was homogenized and spermatids were counted to determine the daily sperm production and daily abnormal sperm production. The sperm count, sperm motility, and incidence of abnormal sperm were estimated in the epididymis. In testicular sections, the seminiferous tubules were observed for qualitative changes. The progression of spermatogenesis was arbitrarily classified as full-matured, maturing, and immature. The specimen slide was observed at 3 points and 10 seminiferous tubules were evaluated at each point. Results: The male rats exposed to single oral dose of BADGE at 750, 1000, and 2000 mg/kg/day were significantly increased the number of immature and maturing sperm on the testis. There were no significant differences with respect to sperm head count, sperm motility, and sperm abnormality in the BADGE treatment groups. Conclusions: These results suggest that single oral exposure of BADGE 750 mg/kg/day can affect adult male testis development.

• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.823-827
• /
• 1994

The mechanical properties of diglycidyl ether of bisphenol A(DGEBA)/4,4- methylene dianiline(MDA) system with the addition of malononitrile(MN) and hydroquinone(HQ) were investigated. The specimens which were prepared by curing at $150^{\circ}C$ for lhr after curing at $80^{\circ}C$ for 1.5hr were tested. The effects of MN as a chain extender and HQ, a reaction accelerator on the mechanical properties were investigated. With the increase of MN and HQ contents, impact property improved significantly but tensile property decreased.

• Macromolecular Research
• /
• v.13 no.3
• /
• pp.223-228
• /
• 2005

In the present work, a low-density polyethylene (LDPE) composite, filled with Zn-ion coated structural silica encapsulated with the diglycidyl ether of bisphenol-A (DGEBA), was synthesized using the conventional melt-blending technique in a sigma internal mixer. The catalytic activity of the Zn-ions (originating from the structural silica) towards the oxirane group (diglycidyl ether of bisphenol-A (DGEBA): encapsulating agent) was assessed by infrared spectroscopy. Two composites, each with a filler content of $2.5 wt\%$ were developed. The first one was obtained by melt blending the Zn-ion coated structural silica with LDPE in a co-rotating sigma internal mixer. The second one was obtained by melt blending the same LDPE, but with DGEBA encapsulated Zn-ion coated structural silica. Epoxy resin encapsulation of the Zn-ion coated structural silica resulted in its having good interfacial adhesion and a homogeneous dispersion in the polymer matrix. Furthermore, the encapsulation of epoxy resin over the Zn-ion coated structural silica showed improvements in both the mechanical and thermal properties, viz. a $33\%$ increase in the elastic modulus and a rise in the onset degradation temperature from 355 to $371^{\circ}C$, in comparison to the Zn-ion coated structural silica.

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.967-974
• /
• 1994

We studied the cure kinetics of the DGEBA(Diglycidyl ether of bisphenol A)/MDA(4, 4' -methylene dianiline)/MN(Malononitrile)/HQ(Hydroquinone) system by Barrett method and Integral method with dynamic runs of differential scanning calorimetry(DSC). Kinetic parameters such as activation energy and pre-exponential factor were obtained and reaction order was estimated roughly supposing that present system was adjusted to nth order reaction. The MN(Malononitrile) was introduced as a chain extender and HQ(Hydroquinone) as a reactive accelerator or catalyst.