• 식물조직배양학회지
• /
• 제28권6호
• /
• pp.353-357
• /
• 2001

인삼의 자엽과 callus에 Biolistic system을 이용한 비선택성 제초제인 bialaphos에 대한 내성을 갖게 하는 PAT 유전자의 형질전환효율 향상 및 형질전환체의 유전분석에 관한 실험을 수행하였다. 자엽의 경우에는 형질전환율이 약했지만 callus의 경우에는 target distance 9 cm, rupture disk-macro-carrier gap distance를 1/3"로 했을 때 가장 양호한 형질전환 결과를 보였다. 형질전환된 인삼식물체에서 PAT 및 NPT 유전자의 존재 여부를 확인하기 위해서 PCR을 수행한 결과 정상 식물체서는 전혀 PCR product가 형성되지 않은 반면 형질전환체 모두에서 PAT (약 300 bp)와 NPT (약 800 bp) 유전자의 band를 확인하여 각각의 유전자가 삽입되어 PAT 및 NPT IIgene이 도입된 형질전환체임을 확인할 수 있었다. 있었다.

• Journal of Plant Biotechnology
• /
• 제48권4호
• /
• pp.246-254
• /
• 2021

Environmental stresses are estimated to have reduced global crop yields of wheat by 5.5%. However, traditional approaches for the transfer of resistance to these stresses in wheat plants have yielded limited results. In this regard, genetic transformation has undoubtedly opened up new avenues to overcome crop losses due to various abiotic stresses. Particle bombardment has been successfully employed for obtaining transgenic wheat. However, most of these procedures employ immature embryos, which are not available throughout the year. Therefore, the present investigation utilized mature seeds as the starting material and used the calli raised from three Moroccan durum wheat varieties as the target tissue for genetic transformation by the biolistic approach. The pANIC-5E plasmid containing the SINA gene for drought and salinity tolerance was used for genetic transformation. To enhance the regeneration capacity and transformation efficiency of the tested genotypes, the study compared the effect of copper supplementation in the induction medium (up to 5 μM) with the standard MS medium. The results show that the genotypes displayed different sensitivities to CuSO₄, indicating that the transformation efficiency was highly genotype-dependent. The integration of transgenes in the T₀ transformants was demonstrated by polymerase chain reaction (PCR) analysis of the obtained resistant plantlets with primers specific to the SINA gene. Among the three genotypes studied, 'Isly' showed the highest efficiency of 9.75%, followed by 'Amria' with 1.25% and 'Chaoui' with 1%.

• Journal of Plant Biotechnology
• /
• 제7권4호
• /
• pp.211-218
• /
• 2005

Genetic transformation was carried out by using biolistic gun method. The hypocotyl derived embryogenic calli (explants) of cotton (Gossypium hirsutum L.) cv. Cocker-312 were transformed with a recombinant pGreen II plasmid, in which both, bar (selection marker) and GUS (${\beta}$-glucuronidase) reporter genes were incorporated. Explants were arranged on osmoticum-containing medium (0.5M mannitol) 4 hours prior to and 16 hours after bombardment that was resulted into an increase about >80% for GUS stable expression. 3 days after bombardment, GUS assay was performed, which exhibited, $18.36{\pm}1.00$ calli showed blue spots. The transformed embryogenic calli were cultured on selection medium (@ 6 mg/L basta) for 3 months. The putative transgenic plants were developed via selective somatic embryogenesis (@1.50 mg/L basta); maximum $27.58{\pm}1.25$ somatic embryos were obtained while $17.47{\pm}1.00$ embryos developed into plantlets (@ 0.75mg/L basta). In five independent experiments, up to 7.24% transformation efficiency was recorded. The presence of the transgenes was analyzed by using PCR and southern hybridization analysis. The transgenic plants were developed with in 6-7 months, but mostly transformants were abnormal in morphology.

• 한국식물생명공학회:학술대회논문집
• /
• 한국식물생명공학회 2005년도 추계학술대회 및 한일 식물생명공학 심포지엄
• /
• pp.406-406
• /
• 2005

• Journal of Plant Biotechnology
• /
• 제36권4호
• /
• pp.336-343
• /
• 2009

Tall fescue is an open-pollinated, perennial, cool season grass species widely used for forage and turf. Tremendous progress has been made in genetic transformation of tall fescue in the past decade. Methods for generating transgenic tall fescue plants have been developed based on biolistic transformation and Agrobacterium-mediated transformation. Potentially useful agronomic genes have been tested to environmental stress tolerance, herbicide tolerance and improve forage quality in tall fescue plants. We review progress in biotechnological improvement of tall fescue and discuss future molecular breeding of this species.

• Journal of Plant Biotechnology
• /
• 제46권4호
• /
• pp.323-330
• /
• 2019

The high expression level of industrial and metabolically important proteins in plants can be achieved by plastid transformation. The CaIA vector, a Capsicum-specific vector harboring aadA (spectinomycin resistance), is a selectable marker controlled by the PsbA promoter, and the terminator is flanked by the trnA and trnI regions of the inverted repeat (IR) region of the plastid. The CaIA vector can introduce foreign genes into the IR region of the plastid genome. The biolistic method was used for chloroplast transformation in Scoparia dulcis with leaf explants followed by antibiotic selection on regeneration medium. Transplastomes were successfully screened, and the transformation efficiency of 3 transgenic lines from 25 bombarded leaf explants was determined. Transplastomic lines were evaluated by PCR and Southern blotting for the confirmation of aadA insertion and its integration into the chloroplast genome. Seeds collected from transplastomes were analyzed on spectinomycin medium with wild types to determine genetic stability. The increased chloroplast transformation efficiency (3 transplastomic lines from 25 bombarded explants) would be useful for expressing therapeutically and industrially important genes in Scoparia dulcis L.

• Journal of Plant Biotechnology
• /
• 제6권1호
• /
• pp.9-13
• /
• 2004

Transient uidA expression was used to optimize parameters required for biolistic transformation of suspension cells of Easter lily, Lilium longiflourm. Maximum uidA expression occurred following bombardment with gold particles as compared to tungsten. A 3hr pre-treatment of suspension cells with 0.125M osmoticum resulted in a 1.5X increase in uidA expression. A helium pressure of 1550 psi combined with a particle travelling distance of 6cm resulted in maximum uidA expression as compared to either 1100, 1200, or 1800 psi. Transient transformation resulted in up to 493 uidA expressing cells/Petri plate. For stable transformation suspension cells of Lilium longiflorum, were co-bombarded with plasmid DNA containing cucumber mosaic virus (CMV) replicase under the rice actin (Act1) promoter and either the bar or PAT genes under the cauliflower mosaic virus (CaMV 355) promoter. Ten regenerated plants contained the transgene as analyzed by PCR, and two of the ten plants were confirmed to contain the transgene by Southern hybridization. The two transgenic plants were independent transformants, one containing the bar gene and the other both the CMV replicase and bar genes. Plants were sprayed at the rosette stage and found to be resistant to 1000 mg/L of phosphinothricin (Trade name-Ignite) indicating expression of the bar gene throughout the leaves when bar was under control of the CaMV 35S promoter.

• 한국작물학회지
• /
• 제65권4호
• /
• pp.386-398
• /
• 2020

밀은 세계 3대 작물 중 하나이고, 전 세계 인구가 소비하는 영양 칼로리의 20%를 담당하는 등 중요한 식량작물이지만 이질 6배체의 복잡한 염색체와 약 16 Gb의 방대한 유전체 크기로 인해 다른 작물들에 비해 분자생물학 및 생명공학연구가 많이 부족한 상황이다. 최근 최신의 차세대염기서열분석법에 의한 밀 유전체 분석이 이루어져 유용한 유전자를 쉽게 얻을 수 있게 되어 여러 방면에서 밀 생명공학연구가 가속화 되고 있다. 본 리뷰에서는 밀의 유전자의 기능을 밝혀 새로운 기능의 생명공학 밀을 육성하는데 필수 불가결한 기술인 밀 형질전환에 대해 상세히 기술하였다. 또한 밀 생명공학기술과 형질전환에 의해 전통육종에 의해 해결하기 어려운 식물병, 비생물학적 스트레스 및 밀 관련 질환을 극복하기 위한 최신의 연구 결과에 대해 서술하였다.

• Applied Biological Chemistry
• /
• 제39권4호
• /
• pp.260-264
• /
• 1996

Cymbidium속 난의 형질전환계를 확립하기 위해서, microprojectile bombardment 방법을 이용하여 춘란(Cymbidium virescence)의 rhizome 조직세포에 외래 유전자를 도입하는 조건을 검토하였다. 각 parameter별 적정조건으로서 텅스텐 입자의 크기는 $1.11\;{\mu}m$, He 가스 압력은 $77.33kg/cm^2$, gap distance는 6.35mm, target distance는 7.0cm 이었다. DNA피복입자를 투사한 $400{\mu}m$ 두께의 rhizome 절편을 2개월간 배양한 뒤 GUS 활성을 조사한 결과 이 유전자가 발현되는 세포들이 관찰되었다. Kanamycin (100 mg/L)을 첨가한 배지에서 6개월 동안 선택배양을 통해 얻은 rhizome의 DNA를 PCR로 분석한 결과 nptII 유전자의 삽입을 확인할 수 있었다.

• Journal of Plant Biotechnology
• /
• 제5권2호
• /
• pp.87-93
• /
• 2003

Brachiaria (Poaceae) is the most important forage genus for cattle production in Brazil. The genetic breeding of this genus is limited by the incompatibility among species, differences in ploidy level and the natural cloning of plants by apomixis (Valle and Miles 1992). However, plant regeneration via tissue culture methods and genetic engineering provide an opportunity to introduce new characteristics in plants of this genus. We have developed methods for the 'genetic modification of Brachiaria brizantha cv. Marandu via biolistic transformation. A higher number of shoots was obtained with 4 mg/L 2.4-diclorophenoxyacetic acid and 0.2 mg/L benzylaminopurine in calli induction medium and 0.1 mg/L naphtaleneacetic acid and 4.0 mg/L kinetin in shoot regeneration medium. A selection curve for mannose was determined to use phospho mannose isomerase (PMI) gene of Escherichia coli as a selection marker. Calli formation was inhibited from 5 g/L mannose, even in the presence of sucrose while calli that were formed in the presence of mannose failed to develop embryos showing that PMI gene can be used for selection of transformants of this grass. Different promoters were tested to evaluate the efficiency based on the detection of the GUS gene expression (Jefferson et al. 1987). The monocot promoters, act1-D and ubi-1, resulted in higher expression levels than dicot promoters, ubi-3 and act-2, or the CaMV35S and CVMV promoters.