• Economic and Environmental Geology
• /
• v.46 no.6
• /
• pp.593-602
• /
• 2013

Biodiesel is an important new alternative transportation fuel and it can be produced by chemically reacting a fat or oil with an alcohol, in the presence of a catalyst. The product of the reaction is a mixture of methyl esters, which are known as biodiesel, and glycerol, which is a high value co-product. The process is known as transesterification. Biodiesel can be used neat and when used as a pure fuel it is known as BD100. However, it is often blended with petroleum-based diesel fuel and when this is done the blend is designated BD5 or BD20(BD20 is a blend of 20% biodiesel and 80% petroleum diesel fuel). Adherence to a quality standard is essential for proper performance of the fuel in the engine and will be necessary for widespread use of biodiesel. In this study, we analyzed 4,144 papers of biodiesel by category, country, institution, keyword etc. from 2001 to 2013 years.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.2
• /
• pp.99-104
• /
• 2011

BACKGROUND: Application of urea may increase $CO_2$ emission from soils due both to $CO_2$ generation from urea hydrolysis and fertilizer-induced decomposition of soil organic carbon (SOC). The objective of this study was to investigate the effects of increasing urea application on $CO_2$ emission from soil and mineralization kinetics of indigenous SOC. METHODS AND RESULTS: Emission of $CO_2$ from a soil amended with four different rates (0, 175, 350, and 700 mg N/kg soil) of urea was investigated in a laboratory incubation experiment for 110 days. Cumulative $CO_2$ emission ($C_{cum}$) was linearly increased with urea application rate due primarily to the contribution of urea-C through hydrolysis to total $CO_2$ emission. First-order kinetics parameters ($C_0$, mineralizable SOC pool size; k, mineralization rate) became greater with increasing urea application rate; $C_0$ increased from 665.1 to 780.3 mg C/kg and k from 0.024 to 0.069 $day^{-1}$, determinately showing fertilizer-induced SOC mineralization. The relationship of $C_0$ (non-linear) and k (linear) with urea-N application rate revealed different responses of $C_0$ and k to increasing rate of fertilizer N. CONCLUSION(s): The relationship of mineralizable SOC pool size and mineralization rate with urea-N application rate suggested that increasing N fertilization may accelerate decomposition of readily decomposable SOC; however, it may not always stimulate decomposition of non-readily decomposable SOC that is protected from microbial decomposition.

• Horticultural Science & Technology
• /
• v.29 no.3
• /
• pp.232-239
• /
• 2011

The genus Acorus is known as an indigenous medicinal plant. Genetic diversity of thirteen accessions of A. calamus and eight of A. gramineus, with an accession of Colocasia antiquorum and two of Iris pseudacorus as outgroups, were evaluated using RAPD markers for cluster analysis and principal coordinate analysis, and NIR spectroscopic profiles for principal component analysis.A total of 371 polymorphic bands were obtained by using the selected 12 random primers. The genetic distances were estimated from 0.03 to 0.31 within A. calamus and from 0.03 to 0.51 within A. gramineus. The dendrogram and three-dimensional plot separated the accessions into four distinct groups (A. calamus, A. gramineus, C. antiquorum, and I. pseudacorus). Moreover, for the diversity among genus Acorus, eleven A. calamus accessions, one A. gramineus accession, and two I. pseudacorus accessions were non-destructively analyzed from their leaves by NIR spectroscopy, which discriminated Acorus accessions like the RAPD analysis. Interestingly, thirteen accessions of A. calamus were clustered into two groups based on RAPD and NIR analyses, which indicates that there are two ecotypes of A. calamus in Korea. An accession (CZ) of A. calamus with yellow stripe on leaves was closely grouped with another (CX) at a genetic distance (GD) of 0.03, which shows that the stripe trait might be generated by chimeric mutation. The genetic distance between A. calamus and A. gramineus was revealed to be farthest from 0.80 to 0.88 GD. In genus Acorus the genetic diversity and genetic variation were identified by using RAPD marker technique and non-destructive NIRs.

• Korean Journal of Agricultural Science
• /
• v.35 no.1
• /
• pp.69-83
• /
• 2008

The self-supply rate of Korea in 2006 was approximately 27.3 % by importing 13.99Mt for 19.79Mt of demanded amount. Among the imported crops, wheat, corn, and soybean consumed 95 % for the total imported amount, and wheat, corn, and soybean were 3.5Mt(Table use : 0.22Mt; Feed stuff : 0.13Mt), 8.7Mt(Table use : 0.19Mt; Feed stuff : 0.68Mt), and 1.2Mt (Table use : 0.03Mt; Feed stuff : 0.09Mt), respectively. On the other hand, our government has prepared the strategies for a great fear of food according to sharp price rise of the international crops by maintaining the self-supply rate of 5 % excluding 5.23Mt of rice in Korea. Also concern for recycled energy known as future energy for era of high oil price and global warming due to green house gas is rapidly growing. Therefore, our country which has relied on import of the whole oil needed in Korea and has to keep Kyoto Agent to request reduction of green house gas fully support research and practical use for agricultural products as resource of alternate energy. At first, we have to develop the mass production technology in order to secure a program of self-supply of food for bioenergy production utilizing agricultural product in Korea. But we assume that this matter is difficult to achieve under the current agriculture system that more emphasizes the environment conservation such as environmentally-friendly agriculture than production of food.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.76-85
• /
• 2015

In this study, we investigated optimal reaction conditions for furfural production from lignocellulosic biomass by two-stage acid treatment. Furfural produced by this method was recovered using XAD-4 resin. Oxalic and sulfuric acid were used as catalysts for the first stage of treatment. The concentration of xylose in the hydrolysate obtained from the first stage was $18.86g/{\ell}$ with oxalic acid and $19.35g/{\ell}$ with sulfuric acid. The concentration of oligosaccharide was relatively high when sulfuric acid was used. Maximum yield of furfural, that is, 55.10% ($6.71g/{\ell}$), was obtained when oxalic acid was used for the first stage and $0.1m{\ell}$ of sulfuric acid was used for the second stage of treatment for 90 min. Furfural production yield increased with increasing the reaction time. Most of the furfural produced by this two-stage treatment method was recovered using XAD-4 resin.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.6
• /
• pp.69-75
• /
• 2013

Miscanthus has received wide attention as an option for biomass production in Korea, recently. New strain of giant miscanthus has been developed and was planted in two large trial sites (184 ha) in the lower reaches of the Geum River. To evaluate the susceptibility of the giant miscanthus as an bioenergy crop for the future, we investigated the influence of the giant miscanthus on the soil properties. The particle size, CEC, pH, EC, T-N, T-P, heavy metal total concentration, and heavy metal fractions of soil samples collected from abandoned field, 1 year old giant miscanthus field (1st Year GM), and 2 year old giant miscanthus field (2nd Year GM) at different depths of 0~15, 15~30, and 30~45 cm in April and August were analyzed. Results showed that the CEC and pH of the soil of the giant miscanthus field were lower than those of the soil of abandoned field. The EC of 2nd GM was lower than that of abandoned field, indicating that the giant miscanthus may facilitate soil desalination process. The organic and sulfide fraction and residual fraction of heavy metals in the giant miscanthus field was higher than in abandoned field, due to the low pH of the giant miscanthus field and the excretion of phytosiderophores by rhizome of the giant miscanthus. This study showed that the giant miscanthus can influence on the soil properties and further study for long term is needed to elucidate the interaction between the soil and the giant miscanthus.

• Journal of Hydrogen and New Energy
• /
• v.27 no.6
• /
• pp.712-720
• /
• 2016

When bioethanol and water are mixed at a proper ratio, phase separation can occur because of the immiscibility of biobutanol with water. Phase separation in bioethanol blends fuels is a major problem for gasoline vehicle users due to effect of octane number and component corrosion. Thus, in this study, the phase separation of bioethanol was examined effect of bioethanol blends (E3 (3 vo.% bioethanol in gasoline), E5 and E10) in presence of water. The effect were evaluated behavior with phase separation test, simulation test of fuel tank in gas station according to water addition volume and it was investigated change of water content, bioethanol content and octane number for gasoline phase in bioethanol blends (E3, E5 and E10) every 1 week after water addition. The E3 occurred phase separation more easily than the E5 and E10 in small water contents because solubility of water on ethanol content difference in gasoline-ethanol. It was kept a initial level of water content, bioethanol content, and octane number by repeated sample replacing in simulation test of fuel tank.

• Clean Technology
• /
• v.18 no.1
• /
• pp.31-37
• /
• 2012

Biomass has become a major feedstock for bioenergy and other bio-based products because of its renewability and environmental benefits. Various researches have been done in the prediction of crucial characteristics of biomass, including the active utilization of spectroscopy data. Near infrared (NIR) spectroscopy has been widely used because of its attractive features: it's non-destructive and cost-effective producing fast and reliable analysis results. This work developed the multivariate statistical scheme for predicting weight loss profiles based on the utilization of NIR spectra data measured for six lignocellulosic biomass types. Wavelet analysis was used as a compression tool to suppress irrelevant noise and to select features or wavelengths that better explain NIR data. The developed scheme was demonstrated using real NIR data sets, in which different prediction models were evaluated in terms of prediction performance. In addition, the benefits of using right pretreatment of NIR spectra were also given. In our case, it turned out that compression of high-dimensional NIR spectra by wavelet and then PLS modeling yielded more reliable prediction results without handling full set of noisy data. This work showed that the developed scheme can be easily applied for rapid analysis of biomass.

• Journal of Marine Bioscience and Biotechnology
• /
• v.6 no.2
• /
• pp.84-101
• /
• 2014

The aim of this project is to develop an adaptive and collective National Marine Biotechnology Plan for the next decade(2014~2023) which is able to reflect current and future changing environment. This effective strategy targets to foster marine-derived active bio-materials, marine bioenergy production technology and many promising technologies in order to promote marine biotechnology industry as a next-generation growth engine. Marine biotechnology industry based on R&D activities since 1980 has been growing as an emerging industry. This new field enables to secure exclusive patent rights and to find new potential bio-active materials from the ocean that requires long-term aggressive R&D investments. The current policy direction is to raise appropriate level of R&D investment because the current Korea's national marine biotechnology R&D fund ratio is less than 2% of the total national biotechnology R&D budget. The result shows three major strategies. First, it recommended a research implementation system and supporting policy that includes establishment of open innovation framework for the 'Industry-Academia-Research Institute Collaborations', strategic research planning and enhanced policy making process. Second, it derived state-of-the-art or new technology in many areas. Third, it formulated more detailed execution plans for successful R&D support and set up performance indicator system in related R&D program.

• Advances in Energy Research
• /
• v.1 no.2
• /
• pp.107-116
• /
• 2013

This study was to investigate the composition and characteristics of long-chained alcohols extracted from the algal strain Monoraphidium 3s35. The production of biomass was optimized using different cultivation methods. Under the aerated growth condition, this strain yielded up to 37.26% extracts of dry weight and $576mgL^{-1}$ biomass. The major compounds of the extracts are mainly long-chained alcohols (89.24%), with carbon chain length ranging from 12 to 20. Interestingly, or the long-chained alcohols, 3-(2-Methoxyethyl)-1-nonanol, 3,7,11,15-Tetramethyl-2-hexadecen-1-ol and oleyl alcohol accounted for 53.68%, 23.45%, and 12.11%, respectively. Because of their amphipathic nature, these long-chained alcohols have been widely used in bioenergy production and cosmetics industry. Furthermore, Monoraphidium 3s35 produced 9.73% of $C_{17}$ and $C_{20}$ alkanes, which can be used as an important supplement for the petrodiesel-like fuel.