• Transactions of the Korean hydrogen and new energy society
• /
• v.27 no.4
• /
• pp.447-461
• /
• 2016

Recently, the Renewable Fuel Standard(RFS) has been commenced from July 31, 2015 in the New and Renewable Energy Act for expanding the supply of renewable energy and reduction of national GHG target in Korea. The biodiesel is only a means of implementation for the RFS, therefore the biodiesel supply expansion is important for fulfilling the RFS obligation policy. The major key points of the biodiesl supply are expanding domestic feedstocks due to the over 60% dependence on foreign feedstock and reducing the price of feedstock because of the over 70% occupation of feed stock price in the biodiesl production cost. Therefore, we estimated actual amount of potential feedstocks which are possible to use for biodiesl production in Korea and investigated technical and political improvements for expanding biodiesl. For estimating a potential feedstocks, first selected the potential biodiesl feedstocks by investigating the status of global biodiesl feedstocks and then analyzed the possible potential amount of each feedstock by surveying the generation situations, the distribution structures and the technical level.

• KSBB Journal
• /
• v.25 no.1
• /
• pp.1-10
• /
• 2010

Biodiesel is a type of biofuel obtained from bioresources and able to use in diesel vehicles as an alternative/additive to petro diesel. In recent biodiesel research, there are three main issues which include high quality biodiesel, low cost feed stock and a highly efficient biodiesel production process. The sustainable production and use of biodiesel are attracting much attention in the renewable energy field. In this paper, we review some of the literatures related to environmental and economic evaluation for biodiesel production and analysis the issues including life cycle assessment (LCA), global warming potential (GWP), energy consumption, biodiesel production cost, production technologies and feedstock.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.688-700
• /
• 2013

The potential of biodiesel production technology using lipids extracted from sewage sludge was investigated. Despite the bright prospect of biodiesel production, efforts to commercialize it have been very limited. One of the major obstacles has been the high price associated with refined oil feedstock, which makes up nearly 70-75% of the total production costs. Hence, in order to reduce the cost of biodiesel production, using cheaper feedstock such as waste oil or low-quality oil has been proposed. Especially, sewage sludge, a relatively inexpensive feedstock, is a promising raw material for such a purpose. In this study, it is aimed to review biodiesel production technology from sewage sludge as a lipid feedstock. It is process modifications to combine the oil extraction steps, fuel conversion steps (i.e. in situ transesterification, thermo-chemical process with non-catalytic heterogeneous biodiesel production) and fuel quality from sewage sludge.

• KSBB Journal
• /
• v.21 no.1 s.96
• /
• pp.68-71
• /
• 2006

Free fatty acids are not esterified by alkaline catalyst transesterification. They are detrimental to the quality specifications in biodiesel. Therefore, we tried to find solid catalyst to remove free fatty acids in feedstock. Amberlyst 15 resin was selected as the best catalyst, and the moisture content containing in the resin was found to be important for the reaction. The removal efficiency of free fatty acids was gradually decreased from 97% to 70% by ten times reuse of resin. In the transesterificaion reaction by KOH catalyst, soap formation could be decreased by 58.3% using the feedstock pretreated by resin. Consequently, the purity of biodiesel was enhanced about 10%, as compared with the non-treated feedstock.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.3
• /
• pp.299-312
• /
• 2008

The fat of Tra and Basa catfish (Mekong Delta, Viet Nam) was evaluated for the first time as the potential feedstock for biodiesel production, due to its abundance, availability and cheap cost. The unsaturated fatty acid contents of Tra and Basa fat were 57.97% and 64.17%, respectively. Biodiesel was prepared from Tra and Basa fat by methanolysis reaction using alkali catalysts like sodium hydroxide and potassium hydroxide. Effects of various process parameters on biodiesel production, such as molar ratio of methanol to fat, catalyst concentration, temperature and time were investigated. As those results, the transesterification can be performed under moderate conditions, and the biodiesel yields were shown more than 90%. KOH catalyst was the best catalyst for biodiesel production from both Basa and Tra fat. As the feedstock aspect, Basa fat was indicated more efficiency than that of Tra fat. The maximum yield could be achieved by the transesterification from Basa fat with 5:1 molar ratio of methanol to fat, 0.8% KOH catalyst, $50^{\circ}C$, and 50 min. For Tra fat, the optimal condition were at 6:1 molar ratio of methanol to fat, 0.8% KOH catalyst, $50^{\circ}C$, and 45 min. Nowadays, due to cheaper cost and abundance, Tra fat is a promised resource for cheap biodiesel production in Viet Nam.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.162-178
• /
• 2015

Petroleum based fossil fuels used to power most processes today are non-renewable fuels. This means that once used, they cannot be reproduced for a very long time. The maximum combustion of fossil fuels occurs in automobiles i.e. the vehicles we drive every day. Thus, there is a requirement to shift from these non-renenewable sources of energy to sources that are renewable and environment friendly. This is causing the need to shift towards more environmentally-sustainable transport fuels, preferably derived from biomass, such as biodiesel blends. These blends can be made from oils that are available in abundance or as waste e.g. waste cooking oil, animal fat, oil from seeds, oil from algae etc. Waste Cooking Oil(WCO) is a waste product and so, converting it into a transportation fuel is considered highly environmentally sustainable. Keeping this in mind, a life cycle assessment (LCA) was performed to evaluate the environmental implications of replacing diesel fuel with WCO biodiesel blends in a regular Diesel engine. This study uses Life Cycle Assessment (LCA) to determine the environmental outcomes of biodiesel from WCO in terms of global warming potential, life cycle energy efficiency (LCEE) and fossil energy ratio (FER) using the life cycle inventory and the openLCA software, version 1.3.4: 2007 - 2013 GreenDelta. This study resulted in the conclusion that the biodiesel production process from WCO in particular is more environmentally sustainable as compared to the preparation of diesel from raw oil, also taking into account the combustion products that are released into the atmosphere as exhaust emissions.

• Advances in Energy Research
• /
• v.8 no.4
• /
• pp.213-222
• /
• 2022

Our overdependence on the limited supply of fossil fuel with the burden of emission as a consequence of its utilization has been a major concern. Biodiesel is emerging as a potential diesel substitution for its similar performance, with the additional benefits of emitting lesser emissions. Due to the easy availability of feedstock for Biogas production, Biogas is studied for its use in CI engines. In this study, we considered Linseed Biodiesel and Biogas to run on dual fuel mode in a CI engine. An energy and exergy analysis was conducted to study the rate of fuel energy and exergy transformation to various other processes. Exergy relocation to exhaust gases was observed to be an average of 5% more for dual fuel mode than the diesel mode, whereas exergy relocation to the diesel mode was observed to be more than the dual fuel modes. Also, exergy loss to exhaust gas is observed to be more than the exergy transferred to cooling water or shaft. The exergy efficiency observed for biodiesel-biogas mode is only lesser by 3% compared to diesel-biogas mode, suggesting Biodiesel can be a substitute fuel for diesel.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.363-369
• /
• 2009

High oil price and biodiesel expansion lead the surplus of glycerol in the market. Glycerol has been used as a raw material itself at petroleum chemistry, paint, tobacco, household products and cosmetics in the conventional market. Recently, many research to find new applications of glycerol as a low-cost feedstock for functional derivatives have led to the introduction of a number of selective processes for converting glycerol into commercially value-added products. The recent studies on the development of new value-added glycerol derivatives will be reviewed.

• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.470-478
• /
• 2020

Spent coffee grounds (SCG), the residue after brewing coffee beverage, is a promising biodiesel feedstock due to its high oil contents (15-20%). However, SCG should be pretreated to reduce the high free fatty acid content, which hampers transesterification reaction. To overcome this, we explored a direct transesterification reaction of SCG using ultrasound irradiation and identified the optimal sonication parameters. A high fatty acid methyl ester (FAME) content, up to 97.2%, could be achieved with ultrasound amplitude of 99.2 ㎛, irradiation time of 10 min, and methanol to oil ratio of 7:1 in the presence of potassium hydroxide concentration of 1.25 wt.%. In addition, we demonstrated that ultrasound irradiation is an efficient method to produce biodiesel from untreated SCG in a short time with less energy than the conventional mechanical stirring method. The physical and chemical properties of the SCG biodiesel met the requirements for an alternative fuel to the current commercial biodiesel.

• KSBB Journal
• /
• v.21 no.6 s.101
• /
• pp.418-421
• /
• 2006

Fatty acid methyl esters, also referred to as biodiesel, have been determined to have a great deal of potential as substitutes for petro-diesel. In order to enhance productivity in the biodiesel production process, feedstocks were previously recommended to be anhydrous, with a free fatty acid content of less than 0.5%. In this study, the effects of several catalysts, methanol molar ratio, catalyst amount, and reaction time on the reduction of free fatty acid level were studied with a simulated feedstock consisting of 20% oleic acid in rapeseed oil. Ferric sulfate was selected as the best catalyst. Increasing the catalyst amount and methanol molar ratio is very effective in decreasing the acid value of the simulated mixture. Our results may provide useful information with regard to the development of more economic and efficient free fatty acid removal system.