• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.sup3
• /
• pp.87-91
• /
• 2016

To investigate whether excision repair cross complementing-group1 (ERCC1) expression status could serve as a bio-predictor of response to platinum-based induction chemotherapy for head and neck cancers (HNCs) patients with a diagnosis of epithelial HNC were studied retrospectively. Paraffin embedded tumor samples of the patients were analyzed by reverse transcription-polymerase chain reaction (RT-PCR) to determine ERCC1 expression status and its correlation with response to platinum-based induction chemotherapy was investigated. Of 44 included patients, 33 were male (75%) and 11 were female (25%) with a mean age of 53 years. Some 36% of patients whose tumor samples had high ERCC1 expression showed no response to induction chemotherapy. The value for patients with low ERCC1 expression was 9% and the difference was statistically significant (p=0.03). The ERCC1 expression state did not significantly vary between patient groups according to sex, age, primary tumor site, and tumor and node stage. Our study indicates that ERCC1 expression status detected by RT-PCR might serve as a bio-predictor of response to platinum-based induction chemotherapy for epithelial HNCs.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.3
• /
• pp.465-468
• /
• 2006

Even though many pesticides are known for barley powdery mildew and wheat leaf rust, alternative controls are necessary, because of consumer rejection of chemical pesticides and the appearance of fungi resistant to fungicides. To discover biopesticides, many broths of microorganisms were screened. Of those, a culture broth of Burkholderia ambifaria showed an excellent antifungal activity against both Erysiphe graminis and Puccinia recondita, which cause barley powdery mildew and wheat leaf rust, respectively.

• Journal of Korea Multimedia Society
• /
• v.23 no.2
• /
• pp.146-154
• /
• 2020

Negative emotion causes stress and lack of attention concentration. The classification of negative emotion is important to recognize risk factors. To classify emotion status, various methods such as questionnaires and interview are used and it could be changed by personal thinking. To solve the problem, we acquire multi modal bio-signals such as electrocardiogram (ECG), skin temperature (ST), galvanic skin response (GSR) and extract features. The neural network (NN), the deep neural network (DNN), and the deep belief network (DBN) is designed using the multi modal bio-signals to analyze emotion status. As a result, the DBN based on features extracted from ECG, ST and GSR shows the highest accuracy (93.8%). It is 5.7% higher than compared to the NN and 1.4% higher than compared to the DNN. It shows 12.2% higher accuracy than using only single bio-signal (GSR). The multi modal bio-signal acquisition and the deep learning classifier play an important role to classify emotion.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.73-73
• /
• 2010

Various organic- and bio-conjugated nanoparticles have been studied extensively for biological applications in medical diagnoses and drug delivery systems. Gold nanoparticles (AuNP) and poly(ethylene glycol) (PEG) are known biocompatible materials to be used in vivo and are becoming increasingly important in biomedical applications. In this work, we investigated the stability of PEG-conjugated AuNPs, dialysis and centrifuge effects after synthesis or pegylation of AuNPs as a function of elapsed time by using ToF-SIMS imaging technique along with dynamic light scattering (DLS), UV-visible absorption spectroscopic and statistical analyses. Roughly 15-nm-sized AuNPs were synthesized in a citrate-conjugated form, and then converted into the thiol-terminated PEG (O-[2-(3-Mercaptopropionylamino)ethyl]-O'-methylpolyethyleneglycol, M.W.=5 kDa) form. Based on our data, we will show that ToF-SIMS imaging analysis along with DLS, UV-visible absorption and statistical analyses would be a useful method to evaluate stability of PEG-conjugated AuNPs in various environmental conditions.

• Proceedings of the Korean Society of Potoscience Conference
• /
• 2005.06a
• /
• pp.42-42
• /
• 2005

• Journal of Pharmaceutical Investigation
• /
• v.33 no.3
• /
• pp.215-221
• /
• 2003

A bioequivalence study of $Ambrect^{TM}$ tablets (Dong Wha Pharm. Ind. Co., Ltd.) to $Mucopect^{TM}$ tablets (Boehringer Ingelheim Korea, Ltd.) was conducted according to the guideline of Korea Food and Drug Administration (KFDA). Twenty four healthy male Korea volunteers received each medicine at the ambroxol hydrochloride dose of 30 mg in a $2{\times}2$ crossover study. There was a one-week wash out period between the doses. Plasma concentrations of ambroxol were monitored by a high-performance liquid chromatography for over a period of 24 hours after the administration. $AUC_t$ (the area under the plasma concentration-time curve from time zero to 24 hr) was calulated by the linear trapezoidal rule method. $C_{max}$ (maximum plasma drug concentration) and $T_{max}\;(time\;to\;reach\;C_{max})$ were compiled from the plasma concentration-time data. Analysis of variance was carried out using logarithmically transformed $AUC_t\;and\;C_{max}$. No significant sequence effect was found for all of the bioavailability parameters indicating that the crossover design was properly performed. The 90% confidence intervals of the $AUC_t$ ratio and the $C_{max}$ ratio for $Ambrect^{TM}/Mucopect^{TM}$ were 0.89-1.01 and 0.89-1.02, respectively. These values were within the acceptable bioequivalence intervals of 0.80-1.25. Thus, our study demonstrated the bioequivalence of $Ambrect^{TM}\;and\;Mucopect^{TM}$ with respect to the rate and extent of absorption.

• Molecules and Cells
• /
• v.28 no.6
• /
• pp.559-563
• /
• 2009

Glyceraldehyde-3-phosphate is a key intermediate in several central metabolic pathways of all organisms. Aldolase and glyceraldehyde-3-phosphate dehydrogenase are involved in the production or elimination of glyceraldehyde-3-phosphate during glycolysis or gluconeogenesis, and are differentially expressed under various physiological conditions, including cancer, hypoxia, and apoptosis. In this study, we examine the effects of glyceraldehyde-3-phosphate on cell survival and apoptosis. Overexpression of aldolase protected cells against apoptosis, and addition of glyceraldehyde-3-phosphate to cells delayed apoptosis. Additionally, delayed apoptotic phenomena were observed when glyceraldehyde-3-phosphate was added to a cell-free system, in which artificial apoptotic process was induced by adding dATP and cytochrome c. Surprisingly, glyceraldehyde-3-phosphate directly suppressed caspase-3 activity in a reversible noncompetitive mode, preventing caspase-dependent proteolysis. Based on these results, we suggest that glyceraldehyde-3-phosphate, a key molecule in several central metabolic pathways, functions as a molecule switch between cell survival and apoptosis.

• Biomedical Engineering Letters
• /
• v.8 no.4
• /
• pp.337-344
• /
• 2018

Additive manufacturing (AM) is an alternative metal fabrication technology. The outstanding advantage of AM (3D-printing, direct manufacturing), is the ability to form shapes that cannot be formed with any other traditional technology. 3D-printing began as a new method of prototyping in plastics. Nowadays, AM in metals allows to realize not only net-shape geometry, but also high fatigue strength and corrosion resistant parts. This success of AM in metals enables new applications of the technology in important fields, such as production of medical implants. The 3D-printing of medical implants is an extremely rapidly developing application. The success of this development lies in the fact that patient-specific implants can promote patient recovery, as often it is the only alternative to amputation. The production of AM implants provides a relatively fast and effective solution for complex surgical cases. However, there are still numerous challenging open issues in medical 3D-printing. The goal of the current research review is to explain the whole technological and design chain of bio-medical bone implant production from the computed tomography that is performed by the surgeon, to conversion to a computer aided drawing file, to production of implants, including the necessary post-processing procedures and certification. The current work presents examples that were produced by joint work of Polygon Medical Engineering, Russia and by TechMed, the AM Center of Israel Institute of Metals. Polygon provided 3D-planning and 3D-modelling specifically for the implants production. TechMed were in charge of the optimization of models and they manufactured the implants by Electron-Beam Melting ($EBM^{(R)}$), using an Arcam $EBM^{(R)}$ A2X machine.

• Progress in Medical Physics
• /
• v.5 no.2
• /
• pp.35-43
• /
• 1994

Electromagnetic wave may induce effect and damage on the bio-body, either by electric fields of magnetic fields. We measure electrophysiological changs in rabbit's brain exposed to 2.45GHz micro wave(power density 40mW/cm$^2$) which distance 30cm from the source. In order to process the bio-electrical signal (EEG), used pre-amplifier module with self-made and Digtal analyzer computer system. Spectal analysis of the EEG showed variable power in the frequency range(1～30Hz) through each exposure time(10min, 20min, 30min) before and after. In effectively measured by the bio-electrical signal processing and can found threshold of minmal permissible exposure and lethal exposure.

• Journal of Sensor Science and Technology
• /
• v.18 no.1
• /
• pp.63-71
• /
• 2009

It is said that the desirable bio-signal measurement and stimulation system should be an implantable type if the several problems such as biocompatibility, electrical safety, and so on are overcome. In addition to the biocompatibility issue, a robust RF communication and a stable electrical power source for the implantable bio-signal measurement and stimulation system are very important matters. In this paper, a wireless telemetry system which adopts the FCC's approved MICS (medical implant communication service) protocol and a wireless power transmission has been proposed. The proposed system composed of a base station (BS) and an implantable medical device (IMD) has the advantages that the interference with other RF devices can be reduced by the use of the specially assigned MICS frequency band of 402.MHz to 405 MHz. Also, the proposed system includes various functions of a multi-channel bio-signal acquisition and an electric stimulation. Since the electrical power for the IMD can be provided by the inductive link between PCB patterned coils, the IMD needs no battery so that the IMD can be smaller size and much less dangerous than the active type IMD which includes the internal battery. Finally, the validity as a wireless telemetry system has been demonstrated through the experiments by using the implemented BS and IMD.