• 제목/요약/키워드: binary field

검색결과 284건 처리시간 0.022초

Non-cooperative interference radio localization with binary proximity sensors

  • Wu, Qihui;Yue, Liang;Wang, Long;Ding, Guoru
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권9호
    • /
    • pp.3432-3448
    • /
    • 2015
  • Interference can cause serious problems in our daily life. Traditional ways in localizing a target can't work well when it comes to the source of interference for it may take an uncooperative or even resistant attitude towards localization. To tackle this issue, we take the BPSN (Binary Proximity Sensor Networks) and consider a passive way in this paper. No cooperation is needed and it is based on simple sensor node suitable for large-scale deployment. By dividing the sensing field into different patches, when enough patches are formed, good localization accuracy can be achieved with high resolution. Then we analyze the relationship between sensing radius and localization error, we find that in a finite region where edge effect can't be ignored, the trend between sensing radius and localization error is not always consistent. Through theoretical analysis and simulation, we explore to determine the best sensing radius to achieve high localization accuracy.

STUDY OF PERIOD VARIATION OF THE ECLIPSING BINARY SYSTEM W DELPHINI

  • Hanna, Magdy A.
    • 천문학회지
    • /
    • 제39권4호
    • /
    • pp.129-138
    • /
    • 2006
  • A period study of the semi-detached eclipsing binary system W Delphini based on the extensive series of minimum timings covering more than a century(109 years) indicates a cyclic(O-C) variation of the system. This variation can be explained as due either to (1) stellar magnetic activity cycles of the cool subgiant G5 secondary component of the binary with a subsurface magnetic field equals to 3 kG, or (2) a long-term orbital period increases with a rate of $1.68{\times}10^{-8}$ day/cycle caused by a mass transfer rate of $4.9{\times}10^{-8}M_{\odot}yr^{-1}$ from the less to more massive component modulated by a light time effect due to a hypothetical third body with period of $53.4{\pm}1.06$ years. The former explanation is more recommended than the later one since the obtained third body mass value($M_3=1.58\;M_{\odot}$) is quite large but it can not manifest itself observationally and also it cannot be a white dwarf. In the contrary, from the magnetic activity point of view, the obtained characteristics are in good consistent when applying Applegate(1992) mechanism. However, further precise photometric and CCD observations for minima timings with brightness determinations are needed to confirm the present solution.

3-D DISPLAY USING COMPUTER-GENERATED BINARY HOLOGRAMS

  • Yoshinori-Kajiki;Masaaki-Okamoto;Koji-Yamasaki;Eiji-Shimizu
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송공학회 1999년도 KOBA 방송기술 워크샵 KOBA Broadcasting Technology Workshop
    • /
    • pp.227-232
    • /
    • 1999
  • We have been making researches on 3-D displays using computer-generated holograms(CGHs). Our CGHs are binary Fresnel holograms that reconstruct point light sources and are recorded by using high resolution laser printers (image setters). We use an image setter with a resolution of 5080 dots per inch. It is possible to reconstruct CGHs with light-emitting points. As the resolution of the image setter is not so high, it is better to use a spherical wave as a reference beam. We considered the recordable points objects are restricted by the low resolution, and proposed the multiplex type hologram to reduce the number of point objects recorded in the unit area of the CGH. We proposed a method to make computer-generated color hologram which could reconstruct color point light sources, by combining RGB color filters with the stripe CGHs corresponding to each color. We considered two kinds of gradation method on our binary CGHs. In this paper, we propose a multiple reconstruction method for improving the narrow viewing field.

Novel Design of 8T Ternary SRAM for Low Power Sensor System

  • Jihyeong Yun;Sunmean Kim
    • 센서학회지
    • /
    • 제33권3호
    • /
    • pp.152-157
    • /
    • 2024
  • In this study, we propose a novel 8T ternary SRAM that can process three logic values (0, 1, and 2) with only two additional transistors, compared with the conventional 6T binary SRAM. The circuit structure consists of positive and negative ternary inverters (PTI and NTI, respectively) with carbon-nanotube field-effect transistors, replacing conventional cross-coupled inverters. In logic '0' or '2,' the proposed SRAM cell operates the same way as conventional binary SRAM. For logic '1,' it works differently as storage nodes on each side retain voltages of VDD/2 and VDD, respectively, using the subthreshold current of two additional transistors. By applying the ternary system, the data capacity increases exponentially as the number of cells increases compared with the 6T binary SRAM, and the proposed design has an 18.87% data density improvement. In addition, the Synopsys HSPICE simulation validates the reduction in static power consumption by 71.4% in the array system. In addition, the static noise margins are above 222 mV, ensuring the stability of the cell operation when VDD is set to 0.9 V.

Radiation-hardened-by-design preamplifier with binary weighted current source for radiation detector

  • Minuk Seung;Jong-Gyun Choi ;Woo-young Choi;Inyong Kwon
    • Nuclear Engineering and Technology
    • /
    • 제56권1호
    • /
    • pp.189-194
    • /
    • 2024
  • This paper presents a radiation-hardened-by-design preamplifier that utilizes a self-compensation technique with a charge-sensitive amplifier (CSA) and replica for total ionizing dose (TID) effects. The CSA consists of an operational amplifier (OPAMP) with a 6-bit binary weighted current source (BWCS) and feedback network. The replica circuit is utilized to compensate for the TID effects of the CSA. Two comparators can detect the operating point of the replica OPAMP and generate appropriate signals to control the switches of the BWCS. The proposed preamplifier was fabricated using a general-purpose complementary metal-oxide-silicon field effect transistor 0.18 ㎛ process and verified through a test up to 230 kGy (SiO2) at a rate of 10.46 kGy (SiO2)/h. The code of the BWCS control circuit varied with the total radiation dose. During the verification test, the initial value of the digital code was 39, and a final value of 30 was observed. Furthermore, the preamplifier output exhibited a maximum variation error of 2.39%, while the maximum rise-time error was 1.96%. A minimum signal-to-noise ratio of 49.64 dB was measured.

Logic of Quantum Mechanics for Information Technology Field

  • Yon, Yong-Ho
    • International Journal of Contents
    • /
    • 제7권4호
    • /
    • pp.56-63
    • /
    • 2011
  • Quantum mechanics is a branch of physics for a mathematical description of the particle wave, and it is applied to information technology such as quantum computer, quantum information, quantum network and quantum cryptography, etc. In 1936, Garrett Birkhoff and John von Neumann introduced the logic of quantum mechanics (quantum logic) in order to investigate projections on a Hilbert space. As another type of quantum logic, orthomodular implication algebra was introduced by Chajda et al. This algebra has the logical implication as a binary operation. In pure mathematics, there are many algebras such as Hilbert algebras, implicative models, implication algebras and dual BCK-algebras (DBCK-algebras), which have the logical implication as a binary operation. In this paper, we introduce the definitions and some properties of those algebras and clarify the relations between those algebras. Also, we define the implicative poset which is a generalization of orthomodular implication algebras and DBCK-algebras, and research properties of this algebraic structure.

이진코딩과 실수코딩이 조합된 유전 알고리즘을 이용한 다단 기어장치의 최적설계 (Optimum Design of Multi-Stage Gear Drive Using Genetic Algorithm Mixed Binary and Real Encoding)

  • 정태형;홍현기;이정상
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 2004년도 춘계학술대회 논문집
    • /
    • pp.118-123
    • /
    • 2004
  • In this study, genetic algorithm mixed binary and real encoding is proposed to deal with design variables of various types. And that is applied to optimum design of Multi-stage gear drive. Design of pressure vessel which is mixed discrete and continuous variables is applied to verify reasonableness of proposed genetic algorithm. The proposed genetic algorithm is applied for the gear ratio optimization and the volume minimization of geared motor which is used in field. In result, it shows that the volume has decreased about 8% compared with the existing geared motor.

  • PDF

전자 나침반과 적외선 광원 추적을 이용한 이동로봇용 위치 인식 시스템 (Localization System for Mobile Robot Using Electric Compass and Tracking IR Light Source)

  • 손창우;이승희;이민철
    • 제어로봇시스템학회논문지
    • /
    • 제14권8호
    • /
    • pp.767-773
    • /
    • 2008
  • This paper presents a localization system based on the use of electric compass and tracking IR light source. Digital RGB(Red, Green, Blue)signal of digital CMOS Camera is sent to CPLD which converts the color image to binary image at 30 frames per second. CMOS camera has IR filter and UV filter in front of CMOS cell. The filters cut off above 720nm light source. Binary output data of CPLD is sent to DSP that rapidly tracks the IR light source by moving Camera tilt DC motor. At a robot toward north, electric compass signals and IR light source angles which are used for calculating the data of the location system. Because geomagnetic field is linear in local position, this location system is possible. Finally, it is shown that position error is within ${\pm}1.3cm$ in this system.

Railway Track Maintenance Scheduling using Artificial Bee Colony and Harmony Search

  • Kim, Ki-Dong;Kim, Sung-Soo;Nam, Duk-Hee;Jeong, Hanil
    • 센서학회지
    • /
    • 제25권2호
    • /
    • pp.91-102
    • /
    • 2016
  • The objective of this paper is to propose a heuristic algorithm to optimize the railway track maintenance scheduling, a NP-hard problem, by reflecting conditions of the actual field more quickly and easily. We develop the mechanism based on Binary Artificial Bee Colony (BABC) and Binary Harmony Search (BHS), and verify their performance through simulation experiments. Our proposed BABC and BHS mechanisms were applied to problems composed of 30, 60, 100, and 200 operations for railway track maintenance scheduling to carry out experiments and analysis. On comparing it with the results solved by CPLEX, it is found that the mechanism could present an optimal solution within limited time by user.

Poling Quality Evaluation of Periodically Poled Lithium Niobate Using Diffraction Method

  • Pandiyan, Krishnamoorthy;Kang, Yeon-Suk;Lim, Hwan-Hong;Kim, Byeong-Joo;Prakash, Om;Cha, Myoung-Sik
    • Journal of the Optical Society of Korea
    • /
    • 제12권3호
    • /
    • pp.205-209
    • /
    • 2008
  • We demonstrated a simple way of evaluating the duty cycle error in periodically polled lithium niobate(PPLN) based on the method of binary phase diffraction grating. To demonstrate this method, -Z face etched PPLN of desired periods were fabricated by the standard electric field poling technique. The etched PPLN was considered as a surface-relief binary phase grating. The diffraction patterns were recorded for different spatial locations along the length of the sample. The experimentally observed efficiencies of the diffracted orders were compared with the theoretically calculated values to estimate the duty cycle error.