• 동력기계공학회지
• /
• 제8권2호
• /
• pp.24-30
• /
• 2004

In this paper, the optimal heating pattern of the furnace is sought to reduce the unnecessary energy loss. A finite difference method was used to estimate the transient temperature field of the billet in a furnace. Heat conduction equations were used in the interior nodes of the billet, while energy balances for conduction, convection, and radiation were considered in the boundary nodes. Several heating patterns for the furnace were tested and subsequently compared each other. The results showed that the temperature in the preheating zone should be set to relatively low. The temperature distributions of the billet are quite different from each other when different heating pattern are used, even though the heating patterns have the same amount of energy consumption. It reveals that there exists an optimal heating pattern to save the energy loss.

• 소성∙가공
• /
• 제9권5호
• /
• pp.494-503
• /
• 2000

The electro-magnetic stirring and mechanical process were applied to fabricate particulate metal matrix composites(PMMCs) with various particle size. The mechanical test on PMMCs was carried out in order to clarify the effect of 76 heat treatment on tensile behaviors. In order to study the thixoforming of PMMCs, fabricated billet are reheated by using the coil designed as a function of length between PMMC billet and coil surface, coil diameter and billet length. The effect of reinforcement distribution on billet temperature variation has been investigated with the calculated solid fraction theory based on a function of matrix alloy and volume fraction of reinforcement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.670-674
• /
• 1997

Semi-solid forging is a compound forging technology to deventional forging process. Among several steps of semi-solid forging process, the heating step of a billet prior to semi-solid forging step is necessarily required to obtain globular microstructure. For the forming operation to work properly, it is also important to heat the billet uniformly for the uniformity of solid-liquid distribution. To satisfy these requirements, induction heating has been generally used for a long time. This paper presents the method to find heating condition and the temperature distribution inside of a billet with a induction heating apparatus by comparing the computer simulation with experiment for aluminum alloys Al2024 and A356.

• 한국정밀공학회지
• /
• 제14권8호
• /
• pp.15-20
• /
• 1997

Semi-solid forging is a compound forging technology to develop conventional forging process. Among several steps of semi-solid forging process, the heating step of a billet prior to semi-solid forging step is necessarily required to obtain globular microstructure. For the forming operation to work properly, it is also important to heat the billet uniformly for the uniformity of solid-liquid distribution. To satisfy these requirements, induction heating has been generally used for a long time. This paper presents the method to find heating condition and the temperature distribution inside a billet with a induction heating apparatus by comparing the computer simulation with experiment for aluminium alloys A12024 and A356.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.175-180
• /
• 2003

An inverse problem to determine two-dimensional total heat exchange factor is studied for the prediction of the billet temperature in the reheating furnace. Temperature measurements by the experiment are used in the inverse analysis. This inverse analysis employs the conjugate gradient method. The total heat exchange factors for 12-zones of the cross-section of the billet are estimated. The estimated temperatures at measurement locations are in good agreements with the measured temperatures.

• 소성∙가공
• /
• 제4권3호
• /
• pp.257-266
• /
• 1995

A simulation method based on upper bound method is developed in order to characterize forging characters in forging of spur gears. In this paper, utilizing a kinematically admissible velocity field and applying it to investigate the effect of inner diameter of holow billet. In the analysis, to predict the variation of inner diameter of hollw billet, neutral surface has been introduced. The neutral surface of each step is assumed as a circle and determined in order to have minimum forging energy by golden section method. By this method, the variation of inner diameter of billet during spur gear forging is successfully predicted. As a result, the selection of inner diameter of initial billet is very important to reduce the forging load.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.183-186
• /
• 1995

A simulation method basee on upper bound method is developed in order to characterize forging characters in forging of spur gears. In this paer, utlizing a kinematically admissible velocity field and applying it to study the effect of inner diameter of holow billet. To predict the variation of inner diameter of hollow billet, neutal surface has been introduced into forging of hollow gears from hollow billes with flat punch. The neutral surface of each step is assumed as a circle and determined in order to have minimum forging energy by golden section method. According to the analysis, the magnitude of inner diameter of initial billet is vary important to reduce the relative pressure and forging load. And the variation of inner diameter of billet during spur gear forging is successfully predicted.

• 소성∙가공
• /
• 제8권2호
• /
• pp.188-199
• /
• 1999

Semi-Solid Forming Process(Thixoforming, Rheocasting) is a novel forming process which has some advantages compared with conventional die casting, squeeze casting and hot/cold forging. In this study. Thixoforming process was selected as analysis processing in terms of billet handling and easiness of automation process. The Thixoforming process consists of reheating process of billet, billet handling, filling inot the die cavity and solidification of SSM part. In filling process, two rheology models which were Newtonian and Non-Nettonian model (Ostwald-deWaele)were verified with experimental results. The Ostwald-deWaele model shows the good agreement to the real flow and filling phenomena in die cavity. To give a boost the economical efficiency of Thixoforming process and to ensure the good forming result, reheating device coupled die set was proposed and the initial billet temperature for system that was found from experimental resluts. This study presents an overview of application of numerical analysis for simulation of semi-solid metal forming process to reduce the lead time for development of manufacturing part in industrial field.

• 한국재료학회지
• /
• 제13권12호
• /
• pp.812-818
• /
• 2003

The aim of this study is to investigate the fabrication processes on the microstructual changes and mechanical properties of large 7175 aluminum die forgings. The billets range from 370 to 720 mm in diameter were homogenized and hot forged after direct chill casting. The strength and elongation of the homogenized cast billets were revealed nearly same level independent of the billet diameter. However, these properties of ø370 mm cast billet were superior to those of $\Pie720$ mm billet under$ T_{6}$ / condition. The tensile strength of die forged specimens under $T_{6}$ condition increased up to 20% than that of solution treatment, however, the elongation was reduced to 50%. The fracture toughness of die forged specimens under $T_{6}$ condition was 35.6∼39.0 MPa$.$$m^{1}$2 irrespective of the billet size and free forging processes, but this property increased up to 10% by$V_{74}$ treatment. The fracture toughness of die forged specimen manufactured with ø370 mm cast billet showed nearly same level of ø720 mm billet which was processed using MF or Cog free forging followed by die forging.

• 센서학회지
• /
• 제5권3호
• /
• pp.25-31
• /
• 1996

제철소에서 생산되고, 활용되는 빌렛은 두 종류로 나누어, 밀도가 높은 강편 빌렛과 밀도가 낯은 연주 빌렛이 있다. 강편 빌렛은 밀도가 높고 표면이 매끄러워, 비교적 탐상이 용이하였으나, 연주 빌렛은 밀도간 낮고, 표면이 거칠어 탐상이 어려웠다. 연주 빌렛의 탐상도 가능케하기 위하여 초음파 탐촉자의 재질 및 치수등을 개선하고자 하였다. 주요 실험 결과로는, 초음파의 발신용 부분과, 수신용 부분이 서로 나뉘어 있는 분할형 탐촉자를 채택하였으며, 탐촉자의 치수는 탐상체의 치수와 밀접히 관계됨을 알았다. 예로써, 폭/두께가 각각 160mm인 연주 빌렛의 경우, 압전소자의 길이가 21mm, 폭이 8.5mm, 두께가 0.95mm, 인 것 두장이 나란히 내장된 탐촉자가 가장 적당하였다. 소자의 두께에 의존하는 이 때의 중심 주파수는 2.25MHz 였으며, 두 장의 압전소자간 각도에 의존하는 촛점 거리는 70mm 이었다.