• 전기화학회지
• /
• 제11권4호
• /
• pp.256-261
• /
• 2008

본 연구에서는 나피온 막을 통한 메탄올 투과도를 감소시키기 위하여 양전하를 띠는 polyaniline(PANi)와 음전하를 갖는 sulfonated Poly(ether sulfone)(SPES)으로부터 다층 자기조립 박막법으로 나피온 막의 표면을 개질하였다. PANi과 SPES는 열적 화학적으로 안정하며 매우 강직한 특성을 띄고 있어, 나피온 막 표면에 다층 자기조립 박막 형성시 메탄올 투과도 감소 및 치수 안정성의 향상을 기대할 수 있다. 자외선-가시광선 흡광분석에 의하여 PANi와 SPES의 다층박막의 형성이 균일하게 이루어짐을 확인 하였다. TEM 분석을 통하여 다층 자기조립 박막의 bilayer당 두께가 약 10 nm 정도임을 확인 하였다. 개질된 나피온 막은 순수한 나피온 막에 비하여 15%의 이온전도도 감소가 일어났지만 67%의 높은 메탄올 투과도 감소를 나타내어 2.5배 높은 선택도를 보였다. 5 M 메탄올을 연료로 사용한 연료전지 성능시험에서 개질된 나피온 막은 순수한 나피온 막에 비해 최대 전력 밀도가 $30^{\circ}C$에서는 2.4배 증가, $60^{\circ}C$에서는 1.4배 향상을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.5-5
• /
• 2009

Thin-film-transistors (TFTs) that can be prepared at low temperatures have attracted much attention because of the great potential for transparent and flexible electronics. One of the mainstreams in this field is the use of organic semiconductors such as pentacene. But device performance of the organic TFTs is still limited due to low field-effect mobility and rapid degradation after exposing to air. Alternative approach is the use of amorphous oxide semiconductors as a channel. Amorphous oxide semiconductors (AOSs) based TFTs showed the fast technological development, because AOS films can be fabricated at room temperature and exhibit the possibility in application like flexible display, electronic paper, and larges solar cells. Among the various AOSs, a-IGZO has lots of advantages because it has high channel mobility, uniform surface roughness and good transparency. [1] The high mobility is attributed to the overlap of spherical s-orbital of the heavy post-transition metal cations. This study demonstrated the effect of the variation in channel thickness from 30nm to 200nm on the TFT device performance. When the thickness was increased, turn-on voltage and subthreshold swing was decreased. The a-IGZO channels and source/drain metals were deposited with shadow mask. The a-IGZO channel layer was deposited on $SiO_2$/p-Si substrates by RF magnetron sputtering, where RF power is 150W. And working pressure is 3m Torr, at $O_2/Ar$ (2/28 sccm) atmosphere. The electrodes were formed with electron-beam evaporated Ti (30 nm) and Au (70 nm) bilayer. Finally, Al (150nm) as a gate metal was thermal-evaporated. TFT devices were heat-treated in a furnace at 250 $^{\circ}C$ and nitrogen atmosphere for 1hour. The electrical properties of the TFTs were measured using a probe-station. The TFT with channel thickness of 150nm exhibits a good subthreshold swing (SS) of 0.72 V/decade and on-off ratio of $1{\times}10^8$. The field effect mobility and threshold voltage were evaluated as 7.2 and 8 V, respectively.

• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.245-265
• /
• 1991

The purpose of this study was to observe the changes of the elemental transmission and bond strength between the metal and porcelain according to various kinds of ion beam mixing method. ion beam mixing of $meta1/SiO_2$ (silica), $meta1/Al_2O_3$(alumina) interfaces causes reactions when the $Ar^+$ was implanted into bilayer thin films using a 100KeV accelerator which was designed and constructed for this study. A vacuum evaporator used in the $10^{-5}-10^{-6}$ Torr vacuum states for the evaporation. For this study, three kinds of porcelain metal selected, -precious, semiprecious, and non-precious. Silica and alumina were deposited to the metal by the vacuum evaporator, separately. One group was treated by two kinds of dose of the ion beam mixing $(1\times10^{16}ions/cm^2,\;5\times10^{15}ions/cm^2)$, and the other group was not mixed, and analyzed the effects of ion beam mixing. The analyses of bond strength, elemental transmissions were performed by the electron spectroscopy of chemical analysis (ESCA), light and scanning electron microscope, scratch test, and micro Vickers hardness tests. The finding led to the following conclusions. 1. In the scanning electron and light microscopic views, ion beam mixed specimens showed the ion beam mixed indentation. 2. In the micro Vickers hardness and scratch tests, ion beam mixed specimens showed higher strength than that of non mixed specimens, however, nonprecious metal showed a little change in the bond strength between mixed and non mixed specimens. 3. In the scratch test, ion beam mixed specimens showed higher shear strength than that of non treated specimens at the precious and semiprecious groups. 4. In the ESCA analysis, Au-O and Au-Si compounds were formed and transmission of the Au peak was found ion beam mixed $SiO_2/Au$ specimen, simultaneously, in the higher and lower bonded areas, and ion beam mixed $SiO_2/Ni-Cr$ specimen, oxygen, that was transmitted from $SiO_2\;to\;SiO_2/Ni-Cr$ interface combined with 12% of Ni at the interface.

• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1056-1063
• /
• 2006

10 nm-Ni/l nm-Ir(poly)Si과 10 nm-$Ni_{50}Co_{50}$/(poly)Si 구조의 박막을 열증착기로 준비하고 쾌속열처리기로 40초간 $300{\sim}1200^{\circ}C$ 온도 범위에서 실리사이드화 시켰다. 이들의 실리사이드 온도에 따른 면저항, 미세구조와 두께, 생성상, 화학조성과 표면조도의 변화를 사점면저항 측정기와 이온빔현미경, X선 회절기, 오제이 분석기, 주사탐침현미경을 써서 확인하였다. Ir과 Co의 혼입에 따라 기존의 $700^{\circ}C$에 한정된 NiSi에 비해 단결정, 다결정 실리콘 기판에서의 저저항 안정 구간이 각각 $1000^{\circ}C$, $850^{\circ}C$로 향상되었다. 이때의 실리사이드층의 두께도 20$\sim$50 nm로 나노급 공정에 적합하였다. Ir과 Co의 첨가는 단결정 기판에서의 니켈실리사이드의 고저항 $NiSi_2$로의 변태를 방지하였고, 다결정 기판에서 고온에서의 고저항은 고저항 상의 출현과 실리콘층과의 혼합과 도치현상이 발생한 것이 이유였다. Ir의 첨가는 특히 최종 실리사이드 표면온도를 3 nm 이내로 유지시키는 장점이 있었다 Ir과 Co를 첨가한 니켈실리사이드는 기존의 니켈실리사이드의 열적 안정성을 향상시켰고 나노급 디바이스에 적합한 물성을 가짐을 확인하였다.