• 한국운동역학회지
• /
• 제23권2호
• /
• pp.149-157
• /
• 2013

In the present study, we aimed to elucidate how muscle strength and activity are affected by movement pattern(bilateral [BLM] & unilateral movement [ULM]) and movement velocity($0^{\circ}$/s, $60^{\circ}$/s, $120^{\circ}$/s) at maximum effort, and to elucidate the relationship between a left/right asymmetry and bilateral deficit. A total of 18 healthy males participated in the study. Each participant performed maximum knee extension bilaterally and unilaterally while the EMG and moment were recorded, and then the relationships between the asymmetry and bilateral deficit were analyzed. The peak moments for the isokinetic motion at $60^{\circ}$/s and $120^{\circ}$/s and overall muscle activities of lower extremity were significantly reduced for the BLM in comparison to the ULM. And though the asymmetry in ULM were maintained during BLM at all velocities, the bilateral deficits at the velocity of $0^{\circ}\acute{y}$/s and $120^{\circ}\acute{y}$/s were significantly correlated with increased asymmetries of muscle strength in ULM. In conclusion, the reduction in the muscle strength exhibited in bilateral knee extension was shown to arise partially from a reduction in muscle activity, and left/right asymmetry was found to be associated with mechanical reduction in bilateral movement. These findings suggest that training aimed at increasing muscle strength must involve methods and strategies intended to reduce left/right asymmetry.

• 한국동물학회지
• /
• 제30권1호
• /
• pp.44-52
• /
• 1987

The spontaneous bilateral asymmetry was analyzed in the hermaphroditic fish Rivulus marmoratus to obtain base line data on the developmental stability of this fish. The results obtained were as follows; 1. Eight kinds of countable anatomical characters except numbers of otolith and radii branchiostegi showed bilateral asymmetry at the frequency ranging from 9.8% to 64.7%. 2. Asymmetry index was not significantly different from that of gonochoristic fish species previously reported. Genetical implication of the results was discussed in relation to developmental stability and homozygosity of this species.

• Imaging Science in Dentistry
• /
• 제43권1호
• /
• pp.31-36
• /
• 2013

Purpose: This study aimed to measure the bilateral differences of facial lines in spherical coordinates from faces within a normal range of asymmetry utilizing cone-beam computed tomography (CBCT). Materials and Methods: CBCT scans from 22 females with normal symmetric-looking faces (mean age 24 years and 8 months) were selected for the study. The average menton deviation was $1.01{\pm}0.66$ mm. The spherical coordinates, length, and midsagittal and coronal inclination angles of the ramal and mandibular lines were calculated from CBCT. The bilateral differences in the facial lines were determined. Results: All of the study subjects had minimal bilateral differences of facial lines. The normal range of facial asymmetry of the ramal and mandibular lines was obtained in spherical coordinates. Conclusion: The normal range of facial asymmetry in the spherical coordinate system in this study should be useful as a reference for diagnosing facial asymmetry.

• 대한치과교정학회지
• /
• 제43권5호
• /
• pp.209-217
• /
• 2013

Objective: This study investigated whether temporomandibular joint (TMJ) condyle-fossa relationships are bilaterally symmetric in class III malocclusion patients with and without asymmetry and compared to those with normal occlusion. The hypothesis was a difference in condyle-fossa relationships exists in asymmetric patients. Methods: Group 1 comprised 40 Korean normal occlusion subjects. Groups 2 and 3 comprised patients diagnosed with skeletal class III malocclusion, who were grouped according to the presence of mandibular asymmetry: Group 2 included symmetric mandibles, while group 3 included asymmetric mandibles. Pretreatment three-dimensional cone-beam computed tomography (3D CBCT) images were obtained. Right- and left-sided TMJ spaces in groups 1 and 2 or deviated and non-deviated sides in group 3 were evaluated, and the axial condylar angle was compared. Results: The TMJ spaces demonstrated no significant bilateral differences in any group. Only group 3 had slightly narrower superior spaces (p < 0.001). The axial condylar angles between group 1 and 2 were not significant. However, group 3 showed a statistically significant bilateral difference (p < 0.001); toward the deviated side, the axial condylar angle was steeper. Conclusions: Even in the asymmetric group, the TMJ spaces were similar between deviated and non-deviated sides, indicating a bilateral condyle-fossa relationship in patients with asymmetry that may be as symmetrical as that in patients with symmetry. However, the axial condylar angle had bilateral differences only in asymmetric groups. The mean TMJ space value and the bilateral difference may be used for evaluating condyle-fossa relationships with CBCT.

• Physical Therapy Rehabilitation Science
• /
• 제10권3호
• /
• pp.374-378
• /
• 2021

Objective: Bilateral movement training is an effective method for upper extremity rehabilitation of stroke. An approach to induce bilateral movement through functional electrical stimulation is attempted. The purpose of this study is to develop an EMG-triggered functional electrical stimulation device for upper extremity bilateral movement training in stroke patients and test its feasibility. Design: Feasibility and Pilot study design. Methods: We assessed muscle activation and kinematic data of the affected and unaffected upper extremities of a stroke patient during wrist flexion and extension with and without the device. Wireless EMG was used to evaluate muscle activity, and 12 3D infrared cameras were used to evaluate kinematic data. Results: We developed an EMG-triggered functional electrical stimulation device to enable bilateral arm training in stroke patients. A system for controlling functional electrical stimulation with signals received through a 2-channel EMG sensor was developed. The device consists of an EMG sensing unit, a functional electrical stimulation unit, and a control unit. There was asymmetry of movement between the two sides during wrist flexion and extension. With the device, the asymmetry was lowest at 60% of the threshold of the unaffected side. Conclusions: In this study, we developed an EMG-triggered FES device, and the pilot study result showed that the device reduces asymmetry.

• 한국운동역학회지
• /
• 제18권1호
• /
• pp.179-190
• /
• 2008

본 연구에서는 양측 하지의 비대칭성이 수직점프의 수행, 즉 양측운동손실에 미치는 영향을 알아보기 위해 13명의 성인 남성을 대상으로 좌/우의 외발과 양발을 각각 이용한 수직반동점프를 비교, 분석하였다. 분석 결과 양발점프가 외발점프에 비해 2배 이상 점프하였으나 외발점프에서 하지가 발현하는 충격량과 일량이 양발점프보다 24% 정도 높게 나타나 양측운동손실을 보여주었다. 또한 우성과 열성하지의 외발점프에서 충격량과 일량은 4-7% 정도의 유의한 역학적 비대칭성이 나타났다. 하지만 양측하지의 비대칭성과 양측운동손실 사이에는 유의한 차이가 보이지 않았으며, 양발점프에서 우성하지와 열성하지의 역학적 변인들 사이에는 유의한 차이가 나타나지 않았다. 양발 점프는 외발점프에 비해 짧은 시간에 관절의 높은 각속도로 긴 거리를 추진하였으며, 낮은 근활동을 보였는데 이러한 요인이 수행의 감소에 영향을 미쳤을 것으로 보인다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권6호
• /
• pp.546-553
• /
• 2008

Purpose: The purpose of this study was to estimate validity of posterior anterior cephalometric and 3D-CT for orbital canting analysis. Materials and methods: Three trained observers classified two patients group using standardized frontal photographs of facial asymmetry patients. Group A consisted of patients with facial asymmetry and orbital canting(n=19), and group B consisted of patients with only facial asymmetry(n=43). Orbital canting was measured with line of bilateral inferior orbitale. Orbital canting measurement was done with posterior anterior cephalometric and 3D-CT. Each horizontal reference line was established by bilateral GWSO(cephalometric), FZS(3D-CT). Maxillary canting and mandibular deviation angle were also measured and analyzed with orbital canting. Results: The mean orbital canting was $3.03{\pm}1.00^{\circ}$ in Group A and $1.11{\pm}0.76^{\circ}$ in Group B in frontal photograph. The mean orbital canting was $1.20{\pm}0.74^{\circ}$ in group A and $1.22{\pm}0.65^{\circ}$ in group B by cephalometric analysis(p>0.05). In 3D-CT, orbital canting was almost paralleled with horizontal reference line. The orbital canting, maxillay canting and mandibular deviation between two groups showed no significant differences except madibular deviation in 3D-CT. Conclusion: Common analysis of posterior anterior cephalometric and 3D-CT is not valide method to evaluate orbital canting for facial asymmetry patients with orbital canting.

• 대한치과의사협회지
• /
• 제48권10호
• /
• pp.724-728
• /
• 2010

Accurate analysis of facial asymmetry prior to any orthognathic or orthodontic treatment plan is essential in ensuring good treatment result. Dental CBCT (Cone-beam Computed Tomography) provides as actual three-dimensional measurements of distance and angle without any radiographic magnification as medical CT provides, while its field of view is limited to the oral and maxillofacial area. CBCT is a useful tool for the diagnosis of facial asymmetry. The coordinates of facial landmarks are obtained from the 3D reconstruction software which enables the establishment of perpendicular planes and the identification of the landmarks. Then, the bilateral discrepancies of the landmarks are obtained as spherical polar coordinates which can show the amount of asymmetry and its direction. A method of 3D analysis of facial asymmetry using CBCT is introduced in this report.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권5호
• /
• pp.359-367
• /
• 2004

Purpose: After the surgical correction with sagittal split ramus osteotomy, the position of the mandibular condyle in the glenoid fossa and the proximal segment of the mandible change because of bony gap between proximal and distal segment, especially in case of mandibular setback asymmetrically. In this study, positional changes in the condyle and proximal segment after BSSRO were estimated in the mandibular asymmetry patient by analyzing the in submentovertex view and P-A cephalogram for identification of ideal condylar position during surgery. Patients and Methods: The 20 patients were selected randomly who visit Dankook Dental Hospital for mandibular asymmetry. Bilateral sagittal split ramus osteotomy with rigid fixation was performed and P-A cephalogram and submentovertex view was taken at the time of preoperative, immediate postoperative, 3 month postoperative period. Results: Intercondylar length and transverse condylar angle was increased due to inward rotation of proximal segment and anteromedial rotation of lateral pole of condyle head. The condylar position had a tendency to return to the preoperative state and after 3 months return up to about half of the immediate post-operative changes, and all the results showed more changes in asymmetry patient and deviated part of the mandible. Conclusion: Based on all these results above, surgeon should make efforts to have a precise preoperative analysis and to have a ideal condylar position during rigid fixation after BSSRO.

• 대한두개안면성형외과학회지
• /
• 제9권2호
• /
• pp.85-89
• /
• 2008

Purpose: Unicoronal synostosis is the craniofacial anomaly caused by premature fusion of unilateral coronal suture. Ipsilateral flattening of the frontal and parietal bones, temporal retrusion with elevation and recession of the supraorbital rim are main clinical features. Compensatory contralateral frontal bossing and deviation of the nasal root and/or chin can also occur. There is a controversy about techniques for surgical correction, however, bilateral approach technique is more effective for correction of deformity. Methods: A 4-year-old patient with unicoronal synostosis had undergone unilateral suturectomy at 28-month-old but fronto-facial deformity had remained and aggravated as she grew older. She had both fronto-facial and endocranial asymmetry. We performed coronal cranial approach and fully exposed affected cranium including supraorbital rim. Anterior 2/3 calvarial reconstruction with bilateral frontal bone osteotomy and fronto-orbital bandeau advancement was performed. Results: Fronto-facial symmetry including fronto-orbital contour, nasal devation was improved. Endocranial twisting was also improved from $158^{\circ}$ to $162^{\circ}$ in CSO(crista gallisella turcica-opisthion) degree. There was no postoperative complications and no need for revision, and facial asymmetry improved at the period of 2 years of follow-up. Conclusion: Bilateral approach with fronto-orbital bandeau remodeling in surgery of unicoronal synostosis looked superior to unilateral approach in achieving better symmetry and preventing recurrence of asymmetry. Remodeling surgery should be tried in patients even at an older age to correct fronto-facial asymmetry.