• Korean Journal of Ichthyology
• /
• v.27 no.4
• /
• pp.275-283
• /
• 2015

Habitat characteristics and feeding ecology of Iksookimia pacifica were investigated in this study to provide baseline data for its ecological characteristics in Bukcheon (stream), Goseong-gun, Gangwon-do, Korea. The main inhabit of I. pacifica was found to be sand bottoms of Bb or Bc river type with slow water flow. Based on studies of their habitat preferences according to age, their preference for sand bed was the same. However, their preference for depth and velocity was different. When their age was increased, their depth preference was also increased ($24.9{\pm}17.61cm$ for 0+ year, $69.6{\pm}30.32cm$ for 1+ year, $82.4{\pm}33.30cm$ for 2+ years, and $90.0{\pm}31.55cm$ for $3+{\leq}$ years). The water velocity was found to be 3.8 ~ 4.0 cm/sec for ages between 0+ and 1+ and 6.0 ~ 7.3 cm/sec for ages between 2+ and $3+{\leq}$. They were active on sand from March to November. They would hibernate in sand during the winter season. During the day from 12 pm to 24 am, they were highly active with high food consumption. Their main food sources analyzed with index of relative importance (IRI) include Chironomidae (76.7%), Simuliidae (10.3%), Rotatoria (7.3%), and Arcellidae (2.2%). Their juveniles (total length 20~40 mm) would feed on small-sized preys such as Rotatoria, Copepoda, and Arcellidae. Older I. pacifica would feed on big-sized preys such as Chironomidae and Simuliidae.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.6
• /
• pp.69-76
• /
• 2015

Although traffic information has been actively analyzed using big data, it has not been used as much with the consideration of driver characteristics. Among the various types of information, road signs can directly affect the driver. Road signs must provide the optimal information that enables drivers to reach their destinations with ease as well as information suitable for navigation systems. However, present road sign rules provide standardized information, regardless of the road type or size. This study suggests a method for providing road information that will help drivers determine their behavior. First, the minimum character size that can be used on a road sign for each design speed was obtained with respect to the visibility and decipherability of a road sign. Instead of conventional diagram-based direction guidance, a scenario using split-based direction guidance was created. To verify the effectiveness of the provided information, a three-dimensional simulated road environment was constructed, and a driving simulator was used for the test. At a simple plane intersection, the driver was not greatly influenced by directional guidance, but at a complex, three-dimensional intersection, the driver preferred summary-based directional guidance, which is instinctive guidance, over diagram-based guidance. On the basis of the test results, a secondary verification test that applied split-based guidance at a three-dimensional intersection confirmed that the driver had no problems in making decisions.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.29-33
• /
• 2007

All pixels of image sensor do not react uniformly even if the light of same radiance enters into the camera. This non-uniformity comes from the sensor pixel non-uniformity and non-uniformity induced by the changing transmission of the telescope over the field. The first contribution to the non-uniformity has high spatial frequency nature and has an influence on the result and quality of the data compression. The second source of non-uniformity has low frequency nature and has no influence of the compression result. As the contribution resulting from the sensor PRNU(Photo Response Non-Uniformity) is corrected inside the camera electronics, the effect of the remaining non-uniformity to the compression result will be negligible. The non-uniformity correction result shall have big difference according to the sensor modeling and the calculation method to get correction coefficient. Usually, the sensor can be modeled with one dimensional coefficients which are a gain and a offset for each pixel. Only two measurements are necessary theoretically to get coefficients. However, these are not the optimized value over the whole illumination level. This paper proposes the algorithm to calculate the optimized non-uniformity correction coefficients over whole illumination radiance. The proposed algorithm uses several measurements and the least square method to get the optimum coefficients. The proposed algorithm is verified using the own camera electronics including sensor, electrical test equipment and optical test equipment such as the integrating sphere.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.164-170
• /
• 2017

The CNC machine tool field is showing a growing trend with the recent rapid development of manufacturing industries such as semiconductors, automobiles, medical devices, various inspection and test equipment, mechanical metal processing equipment, aircraft, shipbuilding and electronic equipment. However, small and medium-sized machining companies that use CNC machine tools are experiencing difficulties in increasingly intense competition. Especially, small companies which are receiving orders from 3rd or 4th venders are very difficult in business management. In recent years, company S experienced difficulty to make product quality and delivery time due to the ignorance of the processing method when manufacturing cooling plate jig made of SUS304 material used for cell phone liquid crystal glass processing. In order to solve these problems, we redesigned the process according to the size of our company and tried to manage all processes with quantified data. In the meantime, we have found that there is a need to improve the cutter process, which accounts for most of the machining process. Therefore, we have investigated the correlation between RPM and FEED of three cutters that have been used in the past. As a result, we found that it is the most urgent problem to solve the roughing process during the cutter operation which occupies more than 70% of the total machining. In order to shorten the machining time and improve the quality in machining of SUS304 cooling plate jig, we select the main factors such as price, tool life, maintenance cost, productivity, quality, RPM, and FEED and use AHP to find the most suitable milling cutter. We also tried to solve the problem of delivery, quality and production capacity which was a big problem of S company through experiment operation with selected cutter tool. As a result, the following conclusions were drawn. First, the most efficient of the three cutters currently available in the machining center has proven to be an M-cutter. Second, although one additional facility was required, it was possible to produce the existing facilities without additional investment by supplementing the lack of production capacity due to productivity improvement. Third, the Company's difficulties in delivery and capacity shortfalls have been resolved. Fourth, annual sales increased by KRW 109 million and profits increased by KRW 32 million annually. Fifth, it can confirm the usefulness of AHP method in corporate decision making and it can be utilized in various facility investment and process improvement in the future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.4
• /
• pp.765-773
• /
• 2017

With the end of the HFA (Hyogo Framework Action) in 2015, SFDRR (Sendai Framework for Disaster Risk Reduction) was adopted as a new agenda for disaster risk reduction at the 3th WCDRR (World Conference on Disaster Risk Reduction), held in March 2015. Continued understanding of the international agenda for reducing disaster risk is critical to disaster risk reduction at the national level as well as international level. Therefore, in this study, we analyzed major changes in the international agenda for disaster risk reduction as the transition from HFA to SFDRR, and analyzed South Korea's major achievements in the HFA and the implementation status of SFDRR in South Korea. In addition, SFDRR emphasizes the role of science and technology in policy making, and examined research trends in science and technology. 49.9% of the efforts were made to prevent the disasters during the disaster management stage, and plans related to priority 1 (40.4%) and 4 (35.8%) were mainly promoted. Science and technology research and development for disaster management were analyzed as active, but 79.7% of the tasks were related to priority 4, and it is necessary to develop all four priorities. Recently, disaster management using next-generation disaster prevention technologies such as satellite technology and big data is required, and it is expected that it will contribute effectively to mitigate disaster risk through establishment of education and policy to support it.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.401-410
• /
• 2017

This study aimed to identify appropriateness and efficiency in the DRG payment system by analysing the hospital length of stay and changes in fees before and after the application of DRG payment system. The subjects of the study were a total of 398 patients consisting of 204 for the fee for service system and 194 for the DRG payment system. They received surgery in the Obstetrics and Gynecology (OBGY) department of a general hospital in G metropolitan city between January and December 2013. The mean hospital length of stay was significantly decreased after application of the DRG payment system(p=0.013). Total fees, insurance charges, and deductions increased significantly(p<0.001), and non-payment charges and total deductions decreased significantly(p<0.001). Application of the DRG payment system reduced length of stay, non-payment charges and total patient's cost sharing and increased out-of-pocket, insurance charges, and total fees.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.319-326
• /
• 2020

PRNGs(Pseudorandom number generators) are essential for generating encryption keys for to secure online communication. A bitstream generated by the PRNG must be generated at high speed to encrypt the big data effectively in a symmetric key cryptosystem and should ensure the randomness of the level to pass through the several statistical tests. CA(Cellular Automata) based PRNGs are known to be easy to implement in hardware and to have better randomness than LFSR based PRNGs. In this paper, we design PRNGs based on PMLCA(Programable Maximum Length CA) that can generate effective key sequences in symmetric key cryptosystem. The proposed PRNGs generate bit streams through nonlinear control method. First, we design a PRNG based on an (m,n)-cell PMLCA ℙ with a single complement vector that produces linear sequences with the long period and analyze the period and the generating polynomial of ℙ. Next, we design an (m,n)-cell PC-MLCA based PRNG with two complement vectors that have the same period as ℙ and generate nonlinear sequences, and analyze the location of outputting the nonlinear sequence.

• The korean journal of orthodontics
• /
• v.50 no.3
• /
• pp.157-169
• /
• 2020

Objective: The aim of this retrospective study was to evaluate the pre- and postsurgical bone densities at alveolar and extra-alveolar sites following two-jaw orthognathic surgery. Methods: The sample consisted of 10 patients (mean age, 23.2 years; range, 18.0-27.8 years; 8 males, 2 females) who underwent two-jaw orthognathic surgery. A three-dimensional imaging program (Invivo 5) was used with multidetector computed tomography images taken pre- and postoperatively (obtained 32.3 ± 6.0 days before surgery and 5.8 ± 2.6 days after surgery, respectively) for the measurement of bone densities at the following sites: (1) alveolar bone in the maxilla and mandible, (2) extra-alveolar sites, such as the top of the head, menton (Me), condyle, and the fourth cervical vertebrae (C4). Results: When pre- and postsurgical bone densities were compared, an overall tendency of decrease in bone density was noted. Statistically significant reductions were observed in the densities of cancellous bone at several areas of the maxillary alveolar bone; cortical and cancellous bone in most areas of the mandibular alveolar bone; cortical bone in Me; and cancellous bone in C4. There was no statistically significant difference in bone density in relation to the depth of the alveolar bone. In a comparison of the bone densities between groups with and without genioplasty, there was almost no statistically significant difference. Conclusions: Accelerated tooth movement following orthognathic surgery may be confirmed with reduced bone density. In addition, this study could offer insights into bone metabolism changes following orthognathic surgery, providing direction for further investigations in this field.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.306-316
• /
• 2016

In this paper, an NMOS-diode eFuse OTP (One-Time Programmable) memory cell is proposed using a parasitic junction diode formed between a PW (P-Well), a body of an isolated NMOS (N-channel MOSFET) transistor with the small channel width, and an n+ diffusion, a source node, in a DNW (Deep N-Well) instead of an NMOS transistor with the big channel width as a program select device. Blowing of the proposed cell is done through the parasitic junction formed in the NMOS transistor in the program mode. Sensing failures of '0' data are removed because of removed contact voltage drop of a diode since a NMOS transistor is used instead of the junction diode in the read mode. In addition, a problem of being blown for a non-blown eFuse from a read current through the corresponding eFuse OTP cell is solved by limiting the read current to less than $100{\mu}A$ since a voltage is transferred to BL by using an NMOS transistor with the small channel width in the read mode.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.184-187
• /
• 2013

The Four Major Rivers Restoration Project of is the multi-purpose green growth project in South Korea. Some of the project was progressed by K-water and was declared complete on October 21, 2011. The Four Rivers Restoration Project of Korea was designed to be a packaged project that aims to resolve water-related problems such as floods and droughts and revitalize Korean public spaces near the water. K-water have applied the latest ICT(Information and Communication Technology) for the operating management of 4 Rivers Project facilities. We also have applied ICT for integrating drinking water production facilities. Applying these ICT, we have many experience for integrated water resources management, so we proposed. The first is that the big data collected should be analyzed for making decisions and taking actions while considering multiple viewpoints of how water should be managed. The second is that the new MMI(Man Machine Interface) program should be developed to use domestic needs and promote ease of maintenance for the integrated operation. The third is that the standardization of communication protocol is needed for seamless communication between equipments.