• Title/Summary/Keyword: bicarbonate

Search Result 459, Processing Time 0.033 seconds

Copper Electrode Material using Copper Formate-Bicarbonate Complex for Printed Electronics

  • Hwang, Jaeeun;Kim, Sinhee;Ayag, Kevin Ray;Kim, Hongdoo
    • Bulletin of the Korean Chemical Society
    • /
    • v.35 no.1
    • /
    • pp.147-150
    • /
    • 2014
  • Copper ink has been prepared by mixing copper(II) formate and 2-ethyl-1-hexylammonium bicarbonate (EHABC) to overcome some weak points such as aggregation and degradation of copper nano-type ink. Ink was coated on glass substrate and calcined at $110^{\circ}C$ to $150^{\circ}C$ to generate electrically conductive copper film under two different atmospheres such as nitrogen gas and gaseous mixture of formic acid and methanol. The lowest resistivity of $1.88{\mu}{\Omega}{\cdot}cm$ of copper film was obtained at $150^{\circ}C$ in gaseous formic acid condition. The long-term resistivity shows to increase from $1.88{\mu}{\Omega}{\cdot}cm$ to $2.61{\mu}{\Omega}{\cdot}cm$ after one month.

Inhibition of Rebar Corrosion by Carbonate and Molybdate Anions

  • Tan, Y.T.;Wijesinghe, S.L.;Blackwood, D.J.
    • Corrosion Science and Technology
    • /
    • v.16 no.4
    • /
    • pp.167-174
    • /
    • 2017
  • Bicarbonate/carbonate and molybdate anions have been characterized for their inhibitive effect on pitting corrosion of carbon steel in simulated concrete pore solution by using electrochemical tests such as electrochemical impedance (EIS) and linear polarization (LP). It was revealed that bicarbonate/carbonate has a weak inhibitive effect on pitting corrosion that is approximately one order of magnitude lower compared to hydroxide. Molybdate is effective against pitting corrosion induced by the concentration of chloride as low as 113 mM and can increase the pitting potential of a previously pitted sample to the oxygen evolution potential by the concentration of molybdate as much as 14.6 mM only. The formation of a $CaMoO_4$ film on the surface hinders the reduction of dissolved oxygen on the steel surface, reducing corrosion potential and increasing the safety margin between corrosion potential and pitting potential further. In addition, pore-plugging by $FeMoO_4$ as a type of salt film within pits increases the likelihood of repassivation.

Influence of Gluconeogenic Phosphoenolpyruvate Carboxykinase (PCK) Expression on Succinic Acid Fermentation in Escherichia coli Under High Bicarbonate Condition

  • Kwon Yeong-Deok;Lee Sang-Yup;Kim Pil
    • Journal of Microbiology and Biotechnology
    • /
    • v.16 no.9
    • /
    • pp.1448-1452
    • /
    • 2006
  • The effects of amplifying the gluconeogenic phosphoenolpyruvate carboxykinase of Escherichia coli ($pck_{Ec}$) on succinic acid production in E. coli were examined under anaerobic condition. No significant increase in succinic acid production was observed in E. coli overexpressing the $pck_{Ec}$ gene without supplementing $NaHCO_{3}$ or $MgCO_{3}$. On the other hand, succinic acid production was enhanced as the $NaHCO_{3}$ concentration was increased. When 20 g/l of $NaHCO_{3}$ was added, succinic acid production in recombinant E. coli overexpressing PCK was 2.2-fold higher than that observed in the wild-type strain. It was concluded that the gluconeogenic $pck_{Ec}$ overexpression enabled E. coli to enhance succinic acid production only under the high bicarbonate supplementation condition.

Effect of bicarbonate concentration on iron biomineralization by psychrotolerant bacteria

  • Lee, Sang-Han;Yul-Roh;Lee, Insung
    • Proceedings of the KSEEG Conference
    • /
    • 2003.04a
    • /
    • pp.236-236
    • /
    • 2003
  • Anaerobic Fe(III)-reducing bacteria are known to be able to reduce crystalline and amorphous Fe(III) oxides. Anaerobic Fe(III)-reducing bacterial reduction can induce several kinds of secondary minerals (Fe(II) containing minerals) such as magnetite, siderite, vivianite [($Fe_{3}(PO_{4}{\cdot}2H_{2}O$], and iron sulfide (FeS) according to variety of geochemical and biological conditions. (omitted)

  • PDF

A Case of Fatal Arrhythmia after Propafenone Overdose (Propafenone 음독 후 발생한 치명적인 부정맥 1례 - 증례 보고-)

  • Kyong, Yeon-Young;Choi, Kyoung-Ho
    • Journal of The Korean Society of Clinical Toxicology
    • /
    • v.6 no.2
    • /
    • pp.123-129
    • /
    • 2008
  • A 36-year-old female was transferred to our emergency medical center with decreased mental status after a 6.0 g propafenone overdose because of domestic disturbance. She had no previous history of epilepsy, diabetes mellitus, hypertension or psychiatric illness. Before presenting to our center, gastrointestinal decontamination, charcoal administration, and endotracheal intubation due to bradycardia and generalized seizure had been performed. Soon after hospital arrival, at 5 h after ingestion, she collapsed into shock and fatal arrhythmia. We successfully resuscitated the patient with amiodarone, sodium bicarbonate, a large volume of normal saline, calcium, and ventilator care. At 23 h after ingestion, she was fully recovered and had no subjective signs or symptoms. To our knowledge, this is the first case report of intentional propafenone overdose in Korea, which we report with reviews of the previous literature.

  • PDF

Effect of Groundwater Anions and pH on the Sorption Removal of Heavy Metals by Bentonite (벤토나이트의 중금속 흡착제거에 대한 pH와 지하수 음이온의 영향)

  • 정찬호
    • Economic and Environmental Geology
    • /
    • v.33 no.1
    • /
    • pp.31-40
    • /
    • 2000
  • Sorption characteristics of Pb, Cu, Cd, and Zn onto Ca- and Na-bentonites were investigated by the batch experiments in the condition of various pHs and concentrations of groundwater major anions (${So_4}^{2-}$ and ($HCO_3$), which can form a complex with heavy metals. The sorption removal of heavy metals steadily increases as pH increases. The sorption capability about heavy metals of both Ca-bentonite and Na-bentonite is in the order of Pb>Cu>Zn>Cd. The effect of pH and selectivity of heavy metals of bentonites were explained by the change of surface charge of bentonite and the speciation of heavy metals. Na-bentonite has a little higher sorption ability about heavy metals than that of Ca-bentonite. A high sorption removal of Pb in 0.1M sulfate solution may be attributed to the precipitation of $PbSo_4$(anglesite). However, sulfate has a slight effect on the sorption of CU, Cd and Zn. More than 99% of heavy metals were removed from the 0.1 M bicarbonate solution. However, the efficiency of sorption removal of heavy metals highly decreases in the bicarbonate solution of $10^{-2}$M to $10^{-4}$M. The speciation and saturation index calculated by the WATEQ4F program indicate that the sorption of anionic complexes such as ${Pb(CO_3)_2}^{2-}$, ${Cd(CO_3)_2}^{2-}$, ${Zn(CO_3)_2}^{2-}$, ${Cu(CO_3)_2}^{2-}$ and the precipitation of the solid phases such as $PbCO_3$(cerrusite), $ZnCO_3$(smithsonite), $CdCO_3$(obtavite) are involved in sorption removal of heavy metals in bicarbonate solution. The sorption capability about heavy metals of bentonites in the presence of anions shows the following order: Pb>Cu Cd>Zn.

  • PDF

Study on removal method of Brownish black and White crust on Mural in Koguryo Tomb (고구려 고분벽화 오염물질 제거에 관한 연구)

  • Han, Kyeong-Soon;Lim, Kwon-Woong
    • Journal of Conservation Science
    • /
    • v.22
    • /
    • pp.99-108
    • /
    • 2008
  • This research aimed to provide a scientific methodology for removing white and black/brown coloured stains on the wall paintings of tombs of Jinpari No 1 and No 4. in the Democratic People's Republic of Korea. For the analysis of chemical composition of stains of the samples from the wall paintings, a microscope and SEM/EDX were used. The analysis confirmed that the fomula of white coloured stains should be $CaSO_4$ or $CaCO_3$ and the black/brown coloured stains should be $CaSO_4$ or $CaCO_3$ with soil deposition. Because of the difficulties of testing several cleaning solutions on sample patches of large area of the painting, the author considered a risk-free cleaning solution as being the most appropriate one, with Ammonium bicarbonate and Anion exchange resin showing satisfactory cleaning effect without visible side effects. For the removal of dense layer of stains, the research suggested that physical cleaning should be followed by applying a cleaning solution.

  • PDF

Hydrogeochemical Characteristics of Spring Water in Halla Mountain Region, Cheju Island (한라산 지역 용천수의 수리지화학적 특성)

  • Youn, Jeung-Su;Park, Sang-Woon
    • Journal of the Korean earth science society
    • /
    • v.21 no.1
    • /
    • pp.81-92
    • /
    • 2000
  • The purpose of this study is to elucidate the characteristic of this study is of attitudinal variation of water quality for nine representative springs in the Halla mountain region. The evolutional processes of the spring water also have been studied. Results of hydrogeochemical analyses show that Gwaneumsa spring is very high in pH. The spring waters from Yungsil, Namguksunwon, Sungpanark Oremok and Gwaneumsa which springs situated lower than 1000m in altitude are relatively high concentrations in chloride, sulphate, nitrate nitrogen and sodium ions, indicating that they are affected by surrounding pollution sources. The concentrations of bicarbonate, sulphate and hydrogen ions in spring waters increase when the precipitation increases, whereas the concentrations of nitrate nitrogen, chloride and calcium ions decrease with increasing amounts of precipitation. The magnesium, sodium and electrical conductivity are nearly independent of the precipitation. The spring waters in the Halla mountain region belong to the groups of sodium or potassium type and bicarbonate type, except the Baegrogdam and Wiseorm spring water.

  • PDF

Effects of sodium bicarbonate as an inorganic carbon source on the growth of scenedesmus dimorphus (무기탄소원으로서의 NaHCO3가 미세조류 Scenedesmus dimorphus의 성장에 미치는 영향 평가)

  • Joo, Sung-Jin;Zhang, Shan;Choi, Kyoung Jin;Lee, SeokMin;Hwang, Sun-Jin
    • Journal of Korean Society of Water and Wastewater
    • /
    • v.28 no.5
    • /
    • pp.555-560
    • /
    • 2014
  • This study investigates the effect of sodium bicarbonate ($NaHCO_3$) on growth of S.dimorphus. $NaHCO_3$ concentration was varied from 0 to 2 g-C/L. As a result, the increase in concentration of $NaHCO_3$ up to 1.5 g-C/L increased dry weight of algae. The highest specific growth rate of S. dimorphus was $0.36day^{-1}$ which was obtained at concentration of 0.5 g-C/L $NaHCO_3$. pH showed a large variation range at the concentrations lower than 0.5 g-C/L $NaHCO_3$ whereas inorganic carbon, nitrate and phosphorus removal rates were almost same at the concentrations higher than 0.5 g-C/L $NaHCO_3$ (0.75, 1, 1.25, 1.5, 2 g-C/L $NaHCO_3$). Their average inorganic carbon, nitrate and phosphorus removal rate were 70 mg-C/L/d, 11.3 mg-N/L/d, and 1.6 mg-P/L/d, respectively. Thus, $NaHCO_3$ didn't effect on inorganic carbon, nitrate and phosphorus removal rate of S. dimorphus.