• 농업과학연구
• /
• 제45권1호
• /
• pp.66-73
• /
• 2018

Hanwoo is an important livestock resource in Korea. Its genetic improvements of economic traits have mainly focused on the steers in the past. However, there is a great necessity to extend the breed improvement programs to the cows as well. Therefore, the objective of this study was to investigate the effects of various environmental factors (person taking the measurement, region, year of measurement, month of measurement, image interpreter, birth-year and birth-year) on ultrasound measured carcass traits. A total of 27,215 ultrasound measurements of carcass traits were recorded between 2004 and 2012 for 22,620 cows born from 1997 to 2011. The ultrasound measures included backfat thickness (BFT), eye muscle area (EMA), and marbling score (MAR). The mean values for the BFT, EMA and MAR were 4.46 mm, $56.24cm^2$, and 4.12 point, respectively. Seven environmental factors, person taking the measurement, region, year of measurement, month of measurement, image interpreter, birth-year and birth-month, were tested to determine if they had a significant effect on the studied traits using the GLM procedure in SAS. All factors were found to significantly affect all the ultrasound carcass traits in this study. Unlike in previous studies, among the environmental effects, the significant effect of the image interpreter on the ultrasound carcass traits was shown for the first time in this study. These results indicate that future genetic evaluations of ultrasound carcass traits of Hanwoo cows should include all of the above environmental factors as well as the effect from people taking the measurements.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권7호
• /
• pp.932-937
• /
• 2002

A partial genome scan using porcine microsatellites was carried out to detect quantitative trait loci (QTL) for backfat thickness (BFT) in a pig reference population. This population carried QTL on chromosomes 1, 13 and 18. The QTL on chromosome 1 was located between marker loci S0113 and SW1301. The QTL corresponded to very low density lipoprotein receptor gene (VLDLR) in location and in biological effects, suggesting that VLDLR might be a candidate gene. The QTL found on chromosome 13 was found between marker loci SWR1941 and SW864, but significance for the marker-trait association was inconsistent by using data with different generations. The QTL on chromosome 18 was discovered between markers S0062 and S0117, and it was in proximity of the regions where IGFBP3 and GHRHR were located. The porcine obese gene might be also a candidate gene for the QTL on chromosome 18. In order to understand genetic architecture of BFT better, fine mapping and positional comparative candidate gene analyses are necessary.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권10호
• /
• pp.1387-1393
• /
• 2014

This study aimed to estimate genetic correlation between carcass grading and retail productivity traits and to estimate the correlated response on retail productivity traits through selection for carcass grading traits in order to assess the efficacy of indirect selection. Genetic parameters were estimated with the data from 4240 Hanwoo steers using mixed models, and phenotypes included carcass weight (CWT), back fat thickness (BFT), eye muscle area (EMA), marbling (MAR), and estimated lean yield percentage (ELP) as the carcass grading traits, and weight and portion of retail cuts (RCW and RCP), trimmed fats (TFW and TFP) and trimmed bones (TBW and TBP) as the lean productivity traits. The CWT had positive genetic correlations with RCW (0.95) and TFW (0.73), but its genetic correlation with RCP was negligible (0.02). The BFT was negatively correlated with RCP (-0.63), but positively correlated with TFW and TFP (0.77 and 0.70). Genetic correlations of MAR with TFW and TFP were low. Among the carcass grading traits, only EMA was positively correlated with both RCW (0.60) and RCP (0.72). The EMA had a relatively strong negative genetic correlation with TFW (-0.64). The genetic correlation coefficients of ELP with RCP, TFW, and TFP were 0.76, -0.90, and -0.82, respectively. These correlation coefficients suggested that the ELP and EMA might be favorable traits in regulating lean productivity of carcass.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권1호
• /
• pp.17-21
• /
• 2012

The purpose of this study was to improve mapping power and resolution for the QTL influencing carcass quality in Hanwoo, which was previously detected on the bovine chromosome (BTA) 6. A sample of 427 steers were chosen, which were the progeny from 45 Korean proven sires in the Hanwoo Improvement Center, Seosan, Korea. The samples were genotyped with the set of 2,535 SNPs on BTA6 that were imbedded in the Illumina bovine 50 k chip. A linkage disequilibrium variance component mapping (LDVCM) method, which exploited both linkage between sires and their steers and population-wide linkage disequilibrium, was applied to detect QTL for four carcass quality traits. Fifteen QTL were detected at 0.1% comparison-wise level, for which five, three, five, and two QTL were associated with carcass weight (CWT), backfat thickness (BFT), longissimus dorsi muscle area (LMA), and marbling score (Marb), respectively. The number of QTL was greater compared with our previous results, in which twelve QTL for carcass quality were detected on the BTA6 in the same population by applying other linkage disequilibrium mapping approaches. One QTL for LMA was detected on the distal region (110,285,672 to 110,633,096 bp) with the most significant evidence for linkage (p< $10^{-5}$). Another QTL that was detected on the proximal region (33,596,515 to 33,897,434 bp) was pleiotrophic, i.e. influencing CWT, BFT, and LMA. Our results suggest that the LDVCM is a good alternative method for QTL fine-mapping in detection and characterization of QTL.

• 생명과학회지
• /
• 제27권3호
• /
• pp.295-300
• /
• 2017

제주재래흑돼지와 듀록의 교배 $F_2$ 집단에서 경제형질과 isocitrate dehydrogenase 3, beta subunit (IDH3B) 유전자의 유전자형의 연관을 시험하였다. IDH3B 유전자형은 promoter 영역에서 304-bp 삽입/결실 절편의 유무를 기준으로 기초축군과 $F_1$, $F_2$에서 판독하였다. 세 가지 유전자형(AA, AB, BB)이 $F_1$과 $F_2$에서는 모두 발견되었으나, JBP에서는 AA 유전자형이, Duroc에서는 BB 유전자형이 발견되지 않았다. 연관 분석결과에서 도체중(CW), 등지방두께(BFT)와 등심단면적(EMA)의 수준이 유전자형에 따라 유의적인 차이를 보였으나(p<0.05), 각기 다른 성장시기별로 측정된 체중들과 일당증체량을 포함한 성장형질, 유두수를 포함한 번식형질, 등심 내 조지방함량(CFAT)의 수준은 유의적인 차이가 없었다(p>0.05). IDH3B AA 동형접합자인 $F_2$ 돼지들은 다른유전자형을 보유한 개체들에 비해 도체중이 더 무겁고($72.92{\pm}11.133kg$), 등지방두께는 더 두껍고($25.75{\pm}6.06mm$), 등심단면적은 더 넓은 수준($23.82{\pm}4.825cm^2$)을 보였다(p<0.05). 이상은 비육돈 생산 후기에 근내지방의 축적과 상관없이, 등심단면적, 등지방두께, 도체중의 증가가 IDH3B 유전자형과 연관된 생물학적 작용에 의한 결과라 하겠다. 돼지 IDH3B의 304-bp 삽입 대립 유전자는 제주재래흑돼지와 Duroc-관련 분자육종체계에서 돈육 생산성 향상을 위한 분자도움선발의 유전적 마커로 이용될 것으로 기대된다.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.901-907
• /
• 2013

본 논문에서는 이방향 응력상태에서의 콘크리트 강도 특성과 크기효과 그리고 피로거동에 관한 연구를 수행하였다. 이를 위해 ASTM C 1550 시험법과 이방향 휨강도 시험(biaxial flexure test; BFT)을 적용하여 크기효과 및 피로시험을 실시하였으며, 단순보의 3등분점 하중에 의한 콘크리트 휨강도 시험(third-point bending test) 결과와 비교하였다. 실험 결과 3등분점 재하 휨강도 시험에 의한 일방향 응력상태의 강도보다는 ASTM C 1550 시험법과 이방향 휨강도 시험법에 의한 이방향 응력상태의 강도가 더 큰 것으로 측정되었다. 3등분점 재하 휨강도 시험, ASTM C 1550, 이방향 휨강도 시험법 모두 시편의 크기가 증가함에 따라 강도는 감소하는 것으로 관찰되었으며, 이방향 휨인장강도의 크기 효과가 일방향 휨인장강도의 크기효과보다 더 큰 것으로 확인되었다. S-N 곡선에 의한 일방향과 이방향 휨강도의 피로 수명은 유사한 것으로 분석되었다.

• Journal of Animal Science and Technology
• /
• 제52권2호
• /
• pp.157-164
• /
• 2010

본 연구는 성숙한 한우 암소 도체에서 몇 개의 도체형질들이 경락단가나 도체가격과 같은 가격변수의 변이에 미치는 영향력을 파악하기 위하여 도체형질과 가격변수들 간의 상관관계 추정, 다중회귀분석 및 경로분석 등을 실시했다. 자료는 강원도 홍천지역 한우 사육농가에서 번식우로 사용되다 2008년도에 도축된 96두의 도체 판정결과를 이용하였다. 도축된 암소들의 도축시 평균 나이는 약 51개월 령이었으며, 도살시 생체중, 냉도체중, 등지방두께, 등심면적, 9단계로 구분하여 평가한 근내지방도 및 도체율의 평균치는 각각 556.81 kg, 319.24 kg, 10.95 mm, $78.08\;cm^2$, 3.92 및 57.19%였다. 그리고 도체경락단가와 도체가격은 각각 12,681원 및 4,070천원이었다. 경락단가와 상관계수가 큰 형질은 MAR, DP 및 EMA 등이었고 육량지수는 상관계수가 제일 작았다. 도체 경락단가를 종속변수로 CWT, BFT, EMA MAR 및 DP등 5개의 도체 형질을 독립변수로 적합시켜 추정한 다중회귀 방정식에서 모형 방정식의 결정계수는 69.86%였고, 도체가격을 종속변수로 하여 추정한 모형 방정식의 결정계수는 85.43%였다. 다중회귀 분석에서 CWT, BFT, EMA, MAR 및 DP의 표준화 편회귀계수는 AP를 종속변량으로 한 방정식에서 각각 -0.028, -0.106, 0.107, 0.814, 0.075, 그리고 CP를 종속변량으로 하는 방정식에서는 각각 0.561, -0.060, 0.083, 0.590, 및 0.051으로 나타나 AP의 변이에 큰 영향을 미치는 형질은 MAR 이었고, CP의 변이에 큰 영향을 미치는 형질은 CWT와 MAR이었던 것으로 판단된다. 경로분석 결과에서도 AP의 변이에 큰 영향을 미치는 형질은 MAR로서 직접효과와 간접효과를 합친 MAR의 기여도는 0.668이었다. 그리고 CP의 변이에 영향을 미치는 MAR의 기여도는 0.408 그리고 CWT의 기여도는 0.397이었다. 이상의 결과를 종합해보면 육량지수는 AP나 CP에 큰 영향을 미치지 않으며 AP의 변이에 영향을 크게 미치는 것은 MAR이고 CP에 영향을 크게 미치는 형질은 MAR과 CWT였다.

• Journal of Animal Science and Technology
• /
• 제53권3호
• /
• pp.211-222
• /
• 2011

The present review was aimed to assess the feasibility of increasing the slaughter weight (SW) of finishing pigs. Growth performance, including ADG, ADFI and gain:feed, does not change significantly with increasing SW between 110 and $135{\pm}5kg$ in lean-genotype pigs, whereas in non-lean pigs, ADG and gain:feed decrease with increasing SW within the similar range of BW. Backfat thickness (BFT) and marbling of the carcass, which are greater in barrows than in gilts, increase with the increase of SW. The SW could be increased by using a low-energy diet and thereby reducing the rate of fat deposition per weight gain. The yield of the belly increases with the increase of SW, which may be economically significant in Korea. However, yields of some other primal cuts do not change so much as to affect the carcass value. The redness and fat content of the muscle increase slightly with the increase of SW whereas moisture content is minimally influenced by SW. Muscular protein content rarely changes, but sometimes increases slightly, with increasing SW. Other physicochemical characteristics, including lightness, pH, drip loss, and cooking loss of the muscle, are barely influenced by SW. Marbling of fresh loin and ham increases with increasing SW. Sensory characteristics of fresh loin, ham, and belly, including color, aroma, off-flavor, drip, and acceptability, are not influenced significantly by SW. The eating quality of cooked pork also has almost no relation to SW. In conclusion, it is thought that the current SW for moderately lean barrows and gilts can be raised up to 125 and 135 kg, respectively, with BFT at these weights predicted to be approximately 24 mm near the last rib, without compromising the meat quality.

• 한국수산과학회지
• /
• 제52권5호
• /
• pp.482-495
• /
• 2019

This study compared the productivity of fish and vegetables grown using the hybrid biofloc technology-aquaponics (HBFT-AP), a semi-recirculating aquaculture system (SRAS), and hydroponics (HP). For the study of fish productivity (HBFT-AP vs. SRAS), fish were provided feed containing 3.0% monobasic potassium phosphate (MKP) for 18 weeks. After the 18-week feeding trial, the average weight of the sampled population (n=100) was not significantly different (P>0.05), while hematocrit (PCV, %), hemoglobin (Hb, g/dL), and plasma K (mEq/L) were significantly different (P<0.05) between the two groups (HBFT-AP: 47.83%, 15.48 g/dL, and 1.39 mEq/L; SRAS 34.83%, 11.81 g/dL, and 2.48 mEq/L). Leaf vegetable productivity (HBFT-AP vs. HP) was compared in three experiments (EXP 1-3), and slower growth was observed in both groups in EXP 2, in which pH was maintained at 5.0 or less throughout the experiment. During the 18-week feeding trial, total ammonia nitrogen (TAN), $NO_3-N$, and $PO_4-P$ levels increased with time in the HBFT-AP system, while the concentration of $NO_2-N$ remained below 0.1 mg/L throughout the study.

• 한국동물생명공학회지
• /
• 제38권4호
• /
• pp.268-274
• /
• 2023

Background: Recently, the single-step genomic best linear unbiased prediction (ssGBLUP) method, which incorporates not only genomic information but also phenotypic information of pedigree, is under study. In this study, we performed a ssGBLUP analysis on a commercial Hanwoo population using phenotypic, genotypic, and pedigree data. Methods: The test population comprised Hanwoo 1,740 heads raised in four regions of Korea, while the reference population used Hanwoo 18,499 heads raised across the country and two-generation pedigree data. Analysis was performed using genotype data generated by the Hanwoo 50 K SNP beadchip. Results: The mean Genome estimated breeding values (GEBVs) estimated using the ssGBLUP methods for carcass weight (CWT), eye muscle area (EMA), back fat thickness (BFT), and marbling score (MS) were 7.348, 1.515, -0.355, and 0.040, respectively, while the accuracy of each trait was 0.749, 0.733, 0.769, and 0.768, respectively. When the correlation analysis between the GEBVs as a result of this study and the actual slaughter performance was confirmed, CWT, EMA, BFT, and MS were reported to be 0.519, 0.435, 0.444, and 0.543, respectively. Conclusions: Our results suggest that the ssGBLUP method enables a more accurate evaluation because it conducts a genetic evaluation of an individual using not only genotype information but also phenotypic information of the pedigree. Individual evaluation using the ssGBLUP method is considered effective for enhancing the genetic ability of farms and enabling accurate and rapid improvements. It is considered that if more pedigree information of reference population is collected for analysis, genetic ability can be evaluated more accurately.