• Journal of Korean Institute of Industrial Engineers
• /
• 제28권3호
• /
• pp.331-343
• /
• 2002

This paper proposes a fuzzy rule-based model as a means to build usability models between emotional satisfaction and design variables of consumer products. Based on a subtractive clustering algorithm, this model obtains partially overlapping rules from existing data and builds multiple local models each of which has a form of a linear regression equation. The best subset procedure and cross validation technique are used to select appropriate input variables. The proposed technique was applied to the modeling of luxuriousness, balance, and attractiveness of office chairs. For comparison, regression models were built on the same data in two different ways; one using only potentially important variables selected by the design experts, and the other using all the design variables available. The results showed that the fuzzy rule-based model had a great benefit in terms of the number of variables included in the model. They also turned out to be adequate for predicting the usability of a new product. Better yet, the information on the product classes and their satisfaction levels can be obtained by interpreting the rules. The models, when combined with the information from the regression models, are expected to help the designers gain valuable insights in designing a new product.

• Food Science and Biotechnology
• /
• 제18권3호
• /
• pp.579-585
• /
• 2009

Solid-phase microextraction (SPME) has gained widespread acceptance in sample pretreatment due to its solvent-free and easy-to-operate properties. SPME fibers are considered as a key part of SPME technique, since it primarily determines the extraction performance of the method including sensitivity, selectivity, and reproducibility. Generally speaking, target analyte with different chemical property requires fiber coating that has the best affinity towards it. Due to the lack of varieties of commercial fibers available currently, considerable efforts have been recently made to develop tailor-made fibers to fulfill increasing demands of different analysis. This paper concisely classify some SPME fiber preparation approaches such as sol-gel technology, physical deposition, molecularly imprinted technique, and their respective application in food safety analysis.

• Proceedings of the KSRS Conference
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.278-281
• /
• 2006

Korea Meteorological Administration(KMA) has issued the tropical storm(typhoon) warning or advisories when it was developed to tropical storm from tropical depression and a typhoon is expected to influence the Korean peninsula and adjacent seas. Typhoon information includes current typhoon position and intensity. KMA has used the Dvorak Technique to analyze the center of typhoon and it's intensity by using available geostationary satellites' images such as GMS, GOES-9 and MTSAT-1R since 2001. The Dvorak technique is so subjective that the analysis results could be variable according to analysts. To reduce the subjective errors, QuikSCAT seawind data have been used with various analysis data including sea surface temperature from geostationary meteorological satellites, polar orbit satellites, and other observation data. On the other hand, there is an advantage of using the Subjective Dvorak Technique(SDT). SDT can get information about intensity and center of typhoon by using only infrared images of geostationary meteorology satellites. However, there has been a limitation to use the SDT on operational purpose because of lack of observation and information from polar orbit satellites such as SSM/I. Therefore, KMA has established Advanced Objective Dvorak Technique(AODT) system developed by UW/CIMSS(University of Wisconsin-Madison/Cooperative Institude for Meteorological Satellite Studies) to improve current typhoon analysis technique, and the performance has been tested since 2005. We have developed statistical relationships to correct AODT CI numbers according to the SDT CI numbers that have been presumed as truths of typhoons occurred in northwestern pacific ocean by using linear, nonlinear regressions, and neural network principal component analysis. In conclusion, the neural network nonlinear principal component analysis has fitted best to the SDT, and shown Root Mean Square Error(RMSE) 0.42 and coefficient of determination($R^2$) 0.91 by using MTSAT-1R satellite images of 2005. KMA has operated typhoon intensity analysis using SDT and AODT since 2006 and keep trying to correct CI numbers.

• Journal of Information Processing Systems
• /
• 제13권3호
• /
• pp.599-617
• /
• 2017

Due to the rapid growth and expansion of the Internet, the digital multimedia such as image, audio and video are available for everyone. Anyone can make unauthorized copying for any digital product. Accordingly, the owner of these products cannot protect his ownership. Unfortunately, this situation will restrict any improvement which can be done on the digital media production in the future. Some procedures have been proposed to protect these products such as cryptography and watermarking techniques. Watermarking means embedding a message such as text, the image is called watermark, yet, in a host such as a text, an image, an audio, or a video, it is called a cover. Watermarking can provide and ensure security, data authentication and copyright protection for the digital media. In this paper, a new watermarking method of still image is proposed for the purpose of copyright protection. The procedure of embedding watermark is done in a transform domain. The discrete cosine transform (DCT) is exploited in the proposed method, where the watermark is embedded in the selected coefficients according to several criteria. With this procedure, the deterioration on the image is minimized to achieve high invisibility. Unlike the traditional techniques, in this paper, a new method is suggested for selecting the best blocks of DCT coefficients. After selecting the best DCT coefficients blocks, the best coefficients in the selected blocks are selected as a host in which the watermark bit is embedded. The coefficients selection is done depending on a weighting function method, where this function exploits the values and locations of the selected coefficients for choosing them. The experimental results proved that the proposed method has produced good imperceptibility and robustness for different types of attacks.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제18권5호
• /
• pp.162-168
• /
• 2004

Service restoration is an emergency control in distribution control centers to restore out-of-service area as soon as possible when a fault occurs in distribution networks. Therefore, it requires fast computation time and high quality solutions for load balancing. In this paper, a load balance index and heuristic guided best-first search are proposed for these problem. The proposed algorithm consists of two parts. One is to set up a decision tree to represent the various switching operations available. Another is to identify the most effective the set of switches using proposed search technique and a feeder load balance index. Test results on the KEPCO's 108 bus distribution system show that the performance is efficient and robust.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제47권5호
• /
• pp.5-14
• /
• 2015

Recently, the use of wood resources has been limited due to global environmental change, like global warming and desertification. It is very critical in Korea's paper industries because lots of virgin pulp are dependant on direct import from abroad for printing grade of paper. In this work, the alternatively best available technique for reducing the import amounts of BKP (bleached Kraft pulp) was considered by mixing DIP (deinked pulp) and TMP (thermomechanical pulp) for the manufacture of high quality paper. Generally known, the sheet prepared from fibrous raw materials of DIP and TMP has lower strength and optical properties than that prepared from BKP. This study was aimed to improve the sheet quality by using DIP and TMP. 4 kinds of polyelectrolytes were approached to find out the best effects on physical strength and optical brightness improvements, and high retention behaviors with GCC (ground calcium carbonate). In conclusion, amphoteric PAM with 1,000,000 molecular weight (g/mol) and 0.5 charge density (meq/g) was best for the improvement of strength properties with the mixture of DIP and TMP. GCC retention rate was also the highest with cationic-PAM of above 2,000,000 molecular weight (g/mol) and about 2.0-3.0 charge density (meq/g) of strengthening agent.

• Archives of Plastic Surgery
• /
• 제43권2호
• /
• pp.181-188
• /
• 2016

Background Major problems with cervicoplasty by direct skin excision include the subjective nature of skin markings preoperatively and the confusing array of procedures offered. This technique incorporates curved incisions, resulting in a wave-like scar, which is why the procedure is called a "wave-plasty". Methods This prospective study includes 37 patients who underwent wave-plasty procedures from 2004 to 2015. Skin pinching technique was used to mark the anterior neck preoperatively in a reproducible fashion. Intra-operatively, redundant skin was excised, along with excess fat when necessary, and closed to form a wave-shaped scar. Patients were asked to follow up at 1 week, 6 weeks, and 6 months after surgery. Results The mean operation time was 70.8 minutes. The majority (81.3%) was satisfied with their progress. On a scale of 1 to 10 (1 being the worst, and 10 being the best), the scars were objectively graded on average 5.5 when viewed from the front and 7.3 when seen from the side 6 months after surgery. Complications consisted of one partial wound dehiscence (2.3%), one incidence of hypertrophic scarring (2.3%), and two cases of under-resection requiring revision (5.4%). Conclusions In select patients, surgical rejuvenation of the neck may be obtained through wave-like incisions to remove redundant cervical skin when other options are not available. The technique is reproducible, easily teachable and carries low morbidity and high patient satisfaction in carefully chosen patients.

• Journal of Technologic Dentistry
• /
• 제42권3호
• /
• pp.234-239
• /
• 2020

Purpose: We investigated the marginal fit between abutment and metal copings according to impression technique, wax block types, and metal types. Methods: We selected the traditional impression method of using rubber impression materials and the digital impression method of using oral scanners, three types of wax blocks, and two types of metal, both of which were domestically and commercially available, were selected to produce metal copings, and the marginal fit was determined through the use of silicon replication. Results: The measurements of axial wall fit revealed that the IYV specimens had the best fit, with a mean gap of 24.11±5.95 ㎛, followed by CEV, CHV, CSS, CSV, CES, CHS, and IYS specimens (mean: 33.44±8.41 ㎛). The differences were not statistically significant. The marginal gap measurements showed that the CEV specimen had the smallest gap, 17.25±4.13 ㎛, followed by the CSV, CHV, CSS, CES, CHS, IYV, and IYS specimen (mean: 43.47±15.63 ㎛). The differences were statistically significant. Conclusion: The axial wall fit of the metal coping (VeraBond2V; Aalba Dent, Inc., Fairfield, CA, USA) produced by the lost wax technique with the traditional impression method was excellent. The marginal fit of the metal coping (VeraBond 2V) produced by wax milling with the use of an oral scanner was also excellent. The marginal fit of the metal coping was within the clinically acceptable limits in all groups.

• Membrane Journal
• /
• 제32권2호
• /
• pp.100-108
• /
• 2022

Among various industries, the textile industry uses the largest amount of water for coloring textiles which leads to a large amount of wastewater containing various kinds of dye. There are various methods for the removal of dye such as flocculation, ozone treatment, adsorption, etc. But these processes are not much successful due to the issue of recycling which enhances the cost. Alternatively, the membrane separation process for the treatment of dye in wastewater is already documented as the best available technique. Polymeric membrane and ceramic membrane are two separate groups of separation membranes. Advantages of ceramic membranes include the ease of cleaning, long lifetime, good chemical and thermal resistance, and mechanical stability. Ceramic membranes can be prepared from various sources and natural materials like clay, zeolite, and fly ash are very cheap and easily available. In this review separation of wastewater is classified into mainly three groups: ultrafiltration (UF), microfiltration (MF), and nanofiltration (NF) process.

• Journal of The Korean Society of Agricultural Engineers
• /
• 제53권1호
• /
• pp.37-45
• /
• 2011

Mandae watershed in Gangwon province has been known as one of soil erosion hot spot watersheds within Hanggang basin. Thus numerous efforts have been made to reduce soil erosion and pollutant loads into receiving watershed. However, proper best management practices have not been suggested because no monitoring flow and water quality data were available. Thus, modeling technique could not be utilized to evaluate water quality issue properly at Mandae watershed to develop and implement the best management practices. In this study, the SWAT model was applied to the Mandae watershed, Gangwon province to evaluate the SWAT prediction ability and water quality improvement with vegetated filter strip (VFS) in this study. The Nash-Sutcliffe model efficiency (NSE) and Coefficient of determination ($R^2$) values for flow simulation were 0.715 and 0.802, respectively, and the NSE and $R^2$ values were 0.903 and 0.920 for T-P simulation indicating the SWAT can be used to simulate flow and T-P with acceptable accuracies. The SWAT model, calibrated for flow and T-P, was used to evaluate water quality improvement with the VFS in agricultural fields. It was found that approximately 56.19 % of T-P could be reduced with vegetated filter strip of 5 m at the edge of agricultural fields within the watershed (34.86 % reduction with VFS of 1m, 48.29 % with VFS of 3 m). As shown in this study, the T-P, which plays key roles in eutrophication in the waterbodies, can be reduced with proper installation of the VFS.