• 한국세라믹학회지
• /
• 제32권11호
• /
• pp.1219-1226
• /
• 1995

Creep behaviors of Cr3C2 composites containing 90 wt% Cr3C2 and 10 wt% Ni were studied at high temperature. Compression tests at 100$0^{\circ}C$ and bending tests at 100$0^{\circ}C$ and 105$0^{\circ}C$ were done in argon environment. In all test conditions primary and steady-state creep behaviors were observed. Stress exponent and activatiion energy were determined from the experimental data. By microstructural analysis of Cr3C2 composites after creep test, the separate agglomerations of Ni phase were observed. Numerical analysis was also studied to analyze bending creep behaviors of Cr3C2 by assumming different tensile and compressive creep behavior in a bending sample. From the analysis, it was found that the stress state at the compressive region as applied stress increased. The observed creep rates were compared with the predicted creep rates by estimating power-law creep parameters from bending test data.

• Journal of the Korean Wood Science and Technology
• /
• 제41권5호
• /
• pp.392-398
• /
• 2013

This study investigated the effect of test zone selection for evaluating bending strength of visually graded lumber. This will contribute to the understanding of two different methods under different standards. In method I, the major defect was randomly placed in the test specimen. In method II, the major defect was randomly placed in the maximum moment zone (MMZ). The results showed that the method II is more accurate for reflecting the effect of defects governing the grade of lumber. Unless the maximum strength-reducing defect (MSRD) is placed in MMZ, the evaluated value would be higher than that of MSRD. For evaluating the modulus of rupture (MOR) of visually graded lumber in test set-up of Method I, the Eq. (5) needs to be considered.

• 소성∙가공
• /
• 제29권4호
• /
• pp.188-193
• /
• 2020

Piping work of large ships or offshore plants is often done in a narrow and confined space, requiring precise bending and safety. In order to realize an accurate bending angle, it is very important to predict and correct a deformation that may be caused by elasticity in the bending process, that is, an angular deviation due to springback. Therefore, by using CAE analysis to develop a correction angle model for springback based on multiple tube bending angles and using trend line data derived from this correction angle model, at bending the tube as the diameter of the base former and the tube outer diameter change, the springback compensation angle at any angle can be obtained. In this study, the bending mechanism was analyzed to increase the bending precision, and a correction angle model was developed and a trend line was derived in consideration of springback occurring in the bending process. In order to derive a more accurate and reliable trend line, a tube tensile test was performed, and the reliability of the corrected angle trend line was verified by comparing the bending angle measurement and analysis results with a 3D scanner.

• 대한치과기공학회지
• /
• 제33권1호
• /
• pp.55-61
• /
• 2011

Purpose: In this study, FEM(Finite Element Method) and bending strength test was conducted using normal implant and porous implant for the mechanical estimation of porous dental implant made by SLM method. Methods: Mechanical characteristics of PI(porous implant) and NI(normal implant) applied distributed loads(200N, 500N) were observed through FEM analysis. And each bending strength was gotten through bending test using MTS(Mechanical Test System, Instron 8871). Results: The result of FEM analysis was observed that stress difference between upper and surface of PI was 12 times, while NI was 2 times. The result of bending test was observed that bending strength of PI was lower than NI. we made a decision about this result that cross-sectional area of NI was larger than the PI. Conclusion: The stress shielding ability of porous implant was better than normal implant through result of FEM analysis. And bending strength of porous implant was lower than NI. We think that cause of this result was difference of cross-sectional area.

• Steel and Composite Structures
• /
• 제31권4호
• /
• pp.329-340
• /
• 2019

An innovated type of the flat steel plate-lightweight aggregate concrete hollow composite slab was presented in this paper. This kind of the slab is composed of flat steel plate and the lightweight aggregate concrete slab, which were interfaced with a set of perfobond shear connectors (PBL shear connectors) with circular hollow structural sections (CHSS) and the shear stud connectors. Five specimens were tested under static monotonic loading. In the test, the influence of shear span/height ratios and arrangements of CHSS on bending capacity and flexural rigidity of the composite slabs were investigated. Based on the test results, the crack patterns, failure modes, the bending moment-curvature curves as well as the strains of the flat steel plate and the concrete were focused and analyzed. The test results showed that the flat steel plate was fully connected to the lightweight aggregate concrete slab and no obvious slippage was observed between the steel plate and the concrete, and the composite slabs performed well in terms of bending capacity, flexural rigidity and ductility. It was further shown that all of the specimens failed in bending failure mode regardless of the shear span/height ratios and the arrangement of CHSS. Moreover, the plane-section assumption was proved to be valid, and the calculated formulas for predicting the bending capacity and the flexural rigidity of the composite slabs were proposed on the basis of the experimental results.

• 한국철도학회논문집
• /
• 제13권2호
• /
• pp.201-207
• /
• 2010

철도 레일의 누적통과톤수에 의한 교체주기기준은 레일의 휨 피로수명에 의해 결정된다. 레일의 휨 피로수명을 평가하기 위해서는 기본적으로 레일의 휨 피로거동(S-N선도)에 대한 분석이 필요하다. 본 연구에서는 국내에서 사용되고 있는 50kg/m, 60kg/m 레일에 대하여 신품 및 사용 용접레일(모재부, 테르밋용접부, 가스압접부)로 구분하여 실물 휨 피로시험을 수행하였으며, 휨 피로시험결과를 바탕으로 파단유형 및 파단면 분석, 파괴 확률에 따른 휨 피로거동(S-N선도) 분석을 수행하였다. 이를 통해 레일종류별, 용접방법별, 신품 및 사용레일에 대한 S-N선도를 도출하였다. 이는 향후 누적통과톤수에 의한 레일 피로수명 평가를 위해 반드시 필요한 기초 자료로서 활용될 것으로 기대된다.

• 한국전문물리치료학회지
• /
• 제26권3호
• /
• pp.32-41
• /
• 2019

Background: Limitations in hip flexion caused by tight hamstrings lead to excessive lumbar flexion and low back pain. Accordingly, many studies have examined how to stretch the hamstring muscle. However, no study has focused on the effect of hamstring eccentric exercise for tight hamstrings on trunk forward bending. Objects: We compared the short-term effect of hamstring eccentric exercise (HEE) and hamstring static stretching (HSS) on trunk forward bending in individuals with tight hamstrings. Methods: Thirty individuals with tight hamstrings participated in the study. The subjects were randomly allocated to either a HEE or HSS group. To determine whether the hamstrings were tight, the active knee extension (AKE) test was performed, and the degree of hip flexion was measured. To assess trunk forward bending, subjects performed the fingertip to floor (FTF) and modified modified Schober tests, and the degree of trunk forward bending was measured using an inclinometer. We used paired t-tests to compare the values before and after exercise in each group and independent t-tests to compare the two groups on various measures Results: The FTF test results were improved significantly after the exercise in both groups, and AKE for both legs increased significantly in both groups. There was no significant difference in the hip angles, mmS test results, or degree of trunk forward bending between groups after the exercise. No test results differed significantly between the two groups at baseline or after the exercise. Both groups increased hamstring flexibility and trunk forward bending. Conclusion: HSS and the HEE groups increased hamstring flexibility and trunk forward bending. However, HEE has additional benefits, such as injury prevention and muscle strengthening.

• 한국정밀공학회지
• /
• 제14권9호
• /
• pp.37-44
• /
• 1997

In this paper the bending collapse characteristics of square and rectangular steel tubes were studied with the pure bending test machine which apply pure bending moment without imposing shear and tensile forces. Under pure bending moment, delayed buckling modes occur and depend on test length and shape of section. For delayed mode, the endrgy of bending moment is absorbed by strain hardening energy. The pre- dictions of maximum moment and moment-rotation angle curve from those concepts are in good agreement with experimental observations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.298-299
• /
• 2005

Differently from the tensile, transverse compression and torsion cases, the bending test of HTS tapes requires a lot of time and efforts, since the sample should be mounted successively onto bent sample holders in the order of decreasing radius and measuring the $I_c$ at each step. The influence of repeated cooling and warming experienced during these processes on the $I_c$ degradation can not be ignored. As a result, in this study, particularly. a new one-body type sample holder which provides continuous bending strains at 77K was devised. And, $I_c$ degradation behavior of Bi-2223 tapes under easy bending condition was investigated and compared that with other cases using Goldacker-type bending tester or respective sample holder.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권2호
• /
• pp.5-8
• /
• 2010

In this study, the effect of bending strain on the transport property and critical current of lap and butt-jointed (non-laminated) BSCCO tapes has been investigated. The samples were joined using a mechanically controlled jointing procedure. To achieve a uniform thickness at the joint a single point loading contact has been devised. GFRP mandrels with different bending radii which support the sample during bending have been used. $I_c$ have been measured at 77 K and self field. In the case of easy bending test for jointed BSCCO tapes, sudden degradation of $I_c$ is caused by the local strain concentration due to non uniform deformation at the edge parts of the joint. In the case of hard bending test of jointed BSCCO tapes transverse macroscopic crack at specific subsection caused a large $I_c$ degradation. The transport property of jointed BSCCO tapes in each bending mode was discussed with the damage morphology occurred.