• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.126.2-126.2
• /
• 2005

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.75-80
• /
• 2001

The purpose of this study is to investigate the characteristics of springback for various process conditions of the 2D draw-bending operation. The process variables are the forming temperature, the geometry of tools such as punch profile radius(Rp) and die profile radius(Rd). Especially, in order to control the springback, the use of the warm forming method is applied. For the warm draw-bending, five steps of temperature ranges, from room temperature to $200^{\circ}C$, were adopted. And two kinds of steel sheets, namely SCP1 and TRIP(transformation-induced plasticity), the newly developed high strength Steel, were adopted. As a result, the springback was affected by the elevated temperature and the geometry of tools in two kinds of steel sheets.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.53-60
• /
• 1999

The bending buckling behavior of circular cylindrical shell is studied. The classical analysis by Love type solution and the package program LUSAS for the structural analysis are used to estimate the critical stresses of circular cylindrical shells under axial compression and bending loads. In this paper, the Love type of buckling equation is carefully investigated and numerical results are presented for a wide range of radius-to-thickness (R/t) ratios and length-to-radius (L/R) ratios. These results show that the maximum critical bending stress is about 30~80% greater than the critical compressive stress

• 소성∙가공
• /
• 제8권1호
• /
• pp.38-46
• /
• 1999

This paper deals with the shape fixability of press formed parts through the use of a V-bending process and a U-bending one. The influence of material properties on the shape fixability in forming processes was investigated. A V-bending process had on optimum ben radius for each combination of parameters which caused maximum shape fixability. In the U-bending process the blank holder force could control the degree of shape fixability. A ha호 blank holding force resulted in a uniform strain distribution and increased shape fixability.

• 항공우주시스템공학회지
• /
• 제13권4호
• /
• pp.37-42
• /
• 2019

본 논문에서는 장치의 유연성과 소형화를 위해 EHD 잉크젯 프린팅 기술을 이용하여 은 나노 잉크의 굽힘 특성을 확인하였다. EHD 기술을 위한 최적조건을 도출하였고 은 나노 회로의 굽힘 특성을 파악하였다. EHD 프린팅을 위해서는 재료 특성, 밀도, 유량, 전압, 토출 높이 등 각 파라미터 별 최적점을 찾아내는 것이 필수적이므로 작동 높이와 인가 전압에 따른 각각의 최적점을 도출하였다. 또한, 제작한 굽힘 장치를 통해 각 곡률 반경 별 저항을 측정하여 굽힘 특성을 알아보았고, 곡률이 증가함에 따라, 저항변화율이 급격히 증가하는 것을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제16권9호
• /
• pp.912-918
• /
• 2006

A modeling method for the vibration analysis of rotating multi-blade systems considering the coupling stiffness effect is presented in this paper. Blades are assumed as cantilever beams and the coupling stiffness effect originates from disc or shroud between blades. As the angular speed, hub radius ratio, and the coupling stiffness vary, the natural frequencies of the system vary. Numerical results show that the coupling stiffness is very important to estimate the natural frequencies. Along with the natural frequencies, associated mode shapes, critical angular speed, and critical hub radius ratio are obtained through the analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.1354-1359
• /
• 2006

A modeling method for the vibration analysis of rotating multi-blade systems considering the coupling stiffness effect is presented in this paper. Blades are assumed as cantilever beams and the coupling stiffness effect originates from disc or shroud between blades. As the angular speed, hub radius ratio, and the coupling stiffness vary, the natural frequencies of the system vary. Numerical results show that the coupling stiffness is very important to estimate the natural frequencies. Along with the natural frequencies, associated mode shapes, critical angular speed, and critical hub radius ratio are obtained through the analysis.

• 수산해양기술연구
• /
• 제30권1호
• /
• pp.45-52
• /
• 1994

The study was conducted to evaluate reliability of the longitudinal tensile properties of unidirectional carbon fiber reinforced composites. Two kinds of carbon fiber reinforced composites laminates were tested in order to examine the factors of variability and have the information concerning reliability improvement. Temperature dependence of the strength and its variability were investigated by means of testing at two kinds of temperatures. Statistical distributions of the respective mechanical properties were obtained from the tensile tests. As a result, strength of composites was directly proportional to the ultimate strain and was not proportional to the elastic modulus. The fracture behavior in bending of notched plate was studied for a composite material. The uniform bending tests of notched plates have been carried out for a wide range of notch radii. The experiment shows that the nominal stress at failure decreased with decreasing notch radius and it approaches a constant value when the notch radius is less than about 0.3mm. The critical maximum stress is governed by notch root radius alone in the case of a constant thickness of specimen.

• 동력기계공학회지
• /
• 제14권1호
• /
• pp.47-52
• /
• 2010

In this study, Finite Element Analysis have been adopted to analyze reducing stress effect and used to induce the sensitivity of design parameter on various techniques which was used for reducing stress. And so it can be utilized as a data to design on similar model. The effect of reducing stress with respect to change of relief groove radius can be increased by 27.3~18.2 % more than radius of fillet. And if a shoulder fillet radius is larger, additional reducing stress by relief groove radius is not obtained. And there was only little effect on reducing stress by changing the center point of groove radius along horizontal direction. In the case that undercut radius is 1.5mm, Max. Equivalent stress is reduced by 5.71% under bending force and 11.11% under torsion. The best effect of reducing stress at undercut model was yielded when the undercut radius is a forth of difference of stepped shaft radius.

• 센서학회지
• /
• 제11권5호
• /
• pp.273-278
• /
• 2002

광섬유의 침입 감지기능을 개발하기 위하여 다중모드 GRIN(graded-Index) 광섬유의 휨에 의한 광섬유내의 광전파 특성변화를 고찰하였다. 다중모드 CRIN 광섬유의 data파는 기본(fundamental) 모드로, 침입 감시용 감시파는 높은 차수의 모드로 동시에 전파 되게 하고, 광섬유의 휨(bending)에 의한 데이타 유출시도는 높은 차수 모드의 감시파의 감쇠를 가져오고, 결국 수신측의 경보를 작동하도록 한다. 또한 일정한 곡률반경으로 감겨진 광섬유에 기본 모드만 선별적으로 주입된 경우에 있어서, 다중모드 GRIN 광섬유 내에서의 광파의 전파과정을 이론적으로 해석하고, 광섬유가 휘게 피는 경우 여러 모드 사이에 결합(coupling)이 생겨나게 되는데, 광섬유가 감겨진 곡률반경을 변경해가면서 결합되는 기본모드의 power 변화를 수치해석을 이용한 프로그램 시뮬레이션을 통하여 조사하였다. 이 연구결과는 광섬유의 휨에 의하여 방출되는 데이타 도청 및 침입자 감지에 다중모드 GRIN 광섬유 활용 가능성과 광섬유의 곡률반경이 1cm 정도가지는 Asawa-Taylor의 모델[4]이 정당함을 보였다.