• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.6
• /
• pp.247-258
• /
• 2000

It is thought that impact damages and hygrothermals can affect to CFRP (Carbon-fiber reinforced plastic) composite laminated due to the sensitivity on the composite laminated Therefore, this paper focuses on the fracture mechanisms experimentally based on a scanning acoustic microscope (SAM) when subjected to impact damages, i.e., foreign object damages(FOD), and also the influence of impact damages and hygrothermals on residual fatigue bending strength of CFRP laminates. Composite laminates used in the experiment are CF/EPOXY orthotropy laminated plates, which constist of two-interfaces [04/904]s. A steel ball launched by an air gun collides against CFRP laminates to generate impact damages. Bending fatigue tests are periodically interrupted for a nondestructive evaluation (NDE) measurement of the progrossive damages to built the fracture mechanism by impact damages, and three-point fatigue bending tests are carried out to investigate the influence of hygrothermals on the effect on the residual bending fatigue strength of CFRP laminates.

• The Journal of Korean Physical Therapy
• /
• v.17 no.3
• /
• pp.413-420
• /
• 2005

The purpose of this study was to determine differences of balance performance to upright standing, forward bending posture, and sudden load during forward bending posture in subjects with and without a history of low back pain. A study was conducted on 8 subjects with low back pain and 13 healthy subjects. Dynamic Balance System was used to measure the postural sway index, left-right sway index, and anterior-posterior sway index on balance performance. There were no differences between subject groups on balance performance during upright standing. Balance performance was increased in forward bending posture and decreased in sudden load during forward bending posture in subjects with low back pain. These results suggest that subjects with low back pain demonstrated increased activity and decreased reaction times of trunk muscles.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.287-294
• /
• 2015

This study investigates the physical properties of Murata Vortex Spinning (MVS) blended yarn with yarn count(20's, 30's, 40's) and blend ratio(Polyester 100, Polyester70:Cotton30, Polyester50:Cotton50, Polyester30:Cotton70, and Polyester50:Tencel40:Cotton10). This study evaluated tenacity, elongation, bending rigidity, bending hysteresis, hairiness coefficient, irregularity and twist number. The structure of MVS blended yarn influenced stress, strain, bending rigidity, bending hysteresis and the hairiness coefficient of MVS blended yarn decreased as the yarn count increased. MVS blended yarn consists of core and sheath. The core of MVS blended yarn is composed of a parallel fiber with a wrapping fiber that covers thecore fiber. This special structure of the MVS blended yarn effects the physical properties of the yarn; in addition, the mechanical properties of the component fibers influenced the stress, strain, bending rigidity, bending hysteresis and hairiness coefficient of MVS blended yarn with the blend ratio. Polyester decreases and cotton increases resulted in decreased physical properties. A similar polyester content increased the tencel and physical properties. Appropriate physical properties and a variety of touch expression can be realized through a correct blend ratio.

• Structural Engineering and Mechanics
• /
• v.48 no.3
• /
• pp.351-365
• /
• 2013

In this paper, unified nonlocal shear deformation theory is proposed to study bending, buckling and free vibration of nanobeams. This theory is based on the assumption that the in-plane and transverse displacements consist of bending and shear components in which the bending components do not contribute toward shear forces and, likewise, the shear components do not contribute toward bending moments. In addition, this present model is capable of capturing both small scale effect and transverse shear deformation effects of nanobeams, and does not require shear correction factors. The equations of motion are derived from Hamilton's principle. Analytical solutions for the deflection, buckling load, and natural frequency are presented for a simply supported nanobeam, and the obtained results are compared with those predicted by the nonlocal Timoshenko beam theory and Reddy beam theories.

• Earthquakes and Structures
• /
• v.16 no.6
• /
• pp.727-741
• /
• 2019

A reinforced concrete water tank is a typical functional liquid storage structure and cracks are the greatest threat to the liquid storage structure. Tanks are readily cracked due to seismic activity, thereby leading to the leakage of the stored liquid and a loss of function. In order to study the effect of cracks on liquid storage tanks, self-healing and leakage tests for bending cracks and through cracks in the walls of a reinforced concrete water tank were conducted. Material performance tests were also performed. The self-healing performance of bending cracks in a lentic environment and through cracks in a lotic environment were tested, thereby the self-healing width of bending micro-cracks in the lentic environment in the short term were determined. The through cracks had the capacity for self-healing in the lotic environment was found. The leakage characteristics of the bending cracks and through cracks were tested with the actual water head on the crack. The effects on liquid leakage of the width of bending cracks, the depth of the compression zone, and the acting head were determined. The relationships between the leakage rate and time with the height of the water head were analyzed. Based on the tests, the relationships between the crack characteristics and self-healing as well as the leakage were obtained. Thereby the references for water tank structure design and grading earthquake damage were provided.

• International Journal of Automotive Technology
• /
• v.6 no.6
• /
• pp.671-676
• /
• 2005

Spring is one of major suspension part of the light commercial vehicle (LCV). In the manufacturing process it is shot-peened to improve its fatigue strength. In this paper, residual stresses by shot peening were calculated through finite element analysis, and the effects of these residual stresses on fatigue strength of leaf spring were evaluated. Fatigue tests were performed with two kinds of specimens; one is actual leaf spring assembly, and the other is simulated 3-point bending specimen. Fatigue tests were performed under the loading condition that was measured on the proving ground. From the results, the maximum load-fatigue life relation of leaf spring was defined, and test results of 3 point bending specimen are in good agreement with those of leaf spring assembly. The effects of residual stresses by shot peening on fatigue strength of leaf spring is not large in the high load range, however, in the low load range, its effects were not negligible.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.63-70
• /
• 2011

This paper presents the design and operating characteristics of the novel cylindrical linear motor which is designed for the long stroke XY stage. In the long stroke structure, the air gap is changed by the distortion and bending effects, and it makes additional position error in the XY stage. In order to consider the distortion and bending effects of the long stroke, the field part of the cylindrical linear motor is designed as an open structure, and the stroke is supported by the bridge guide which is positioned in the open field part. The mechanical bridge guide can reduce the bending effects of the stroke and can keep a constant air gap. The detailed design process of the proposed cylindrical linear motor is presented in this paper. The proposed motor is analyzed by the 3D FEM technology. The practical XY stage which uses the proposed motor is tested to verify the propose novel cylindrical linear motor. The FEM and experimental results show the effectiveness of the proposed motor.

• Journal of Korea Foresty Energy
• /
• v.19 no.1
• /
• pp.13-19
• /
• 2000

This study was aimed to investigate the effect of several stimulatory trements of flower and seed growth on the reproductive and vegetative growth of Tilia amurensis RUBP. The effects of mounded planting, girdling, root-pruning, bending and foliar fertilizer application on the fifteen to forty yead-old tress growing in the experimental plantation at the Konkuk University and the National forest at the Daegwanryung were measured. The following results were obtained: (1) The number and the longitydinal growth of internode were reduced by the treatments. The xylem growth of the longitudited more greatly than the bark growth by all the treatments. (2)The increasong rate of the brand angle as compared to that of the control was 2.11% in the girdling treatment, 31.61% in the mounded planting treatment, and 22.14% in root-pruning treatment. (3) The foliar application of fertilizer(N, P, K, and B) before flowering increased leaf and stem growth, that one after pollen fertilization increased the fruit growth. (4)The foliar application of fertilizer before flowering increased the xylem growth while that after pollen fertilization increased the bark growth. (5)The stimulatory effects of root pruning and branch bending on the flowering and seed growth were shown relatively less than that of mounded planting. The effect of the moinded planting on the yield of the seeds has remained continuously every year since planting the trees.

• Steel and Composite Structures
• /
• v.21 no.6
• /
• pp.1347-1368
• /
• 2016

In this article, an exact analytical solution for mechanical buckling analysis of symmetrically cross-ply laminated plates including curvature effects is presented. The equilibrium equations are derived according to the refined nth-order shear deformation theory. The present refined nth-order shear deformation theory is based on assumption that the in-plane and transverse displacements consist of bending and shear components, in which the bending components do not contribute toward shear forces and, likewise, the shear components do not contribute toward bending moments The most interesting feature of this theory is that it accounts for a parabolic variation of the transverse shear strains across the thickness and satisfies the zero traction boundary conditions on the top and bottom surfaces of the plate without using shear correction factors. Buckling of orthotropic laminates subjected to biaxial inplane is investigated. Using the Navier solution method, the differential equations have been solved analytically and the critical buckling loads presented in closed-form solutions. The sensitivity of critical buckling loads to the effects of curvature terms and other factors has been examined. The analysis is validated by comparing results with those in the literature.

• Advances in nano research
• /
• v.10 no.2
• /
• pp.101-114
• /
• 2021

An analytical investigation has been performed on the mechanical performance of waves propagated in a Single-Layered Graphene Sheet (SLGS) when an In-plane Varying Bending (IVB) load is interacted. It has been supposed that the Graphene Sheet (GS) is located on an elastic medium. Employing a two-parameter elastic foundation, the effects of elastic substrate on the GS behavior are modeled. Besides, the kinematic equations are derived by the means of a trigonometric two-variable refined plate theory. Moreover, in order to indicate the size-dependency of the SLGS, a Nonlocal Strain Gradient Theory (NSGT) was considered. The nonlocal governing differential equations are achieved in the framework of Hamilton's Principle (HP). Also, an analytical approach was used to detect the unknowns of the final eigenvalue equation. Finally, the effects of each parameters using some dispersion charts were determined.