• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.199-200
• /
• 2022

In this study, the material properties of UHPC mixed with graphene was investigated. The compressive strength, the bending strength and the permeability test was conducted. As a result, there was no improvement in compressive strength by the graphene, but the bending strength increased by 20% by the graphene. The water penetration amount decreased by 80% by the graphene.

• Advanced Composite Materials
• /
• 제18권3호
• /
• pp.287-295
• /
• 2009

$\beta$-Tricalcium phosphate ($\beta$-TCP) particles reinforced bioresorbable plastics poly-L-lactide (PLLA) composites were prepared by injection molding. The nominal weight ratio of $\beta$-TCP was selected as 5, 10 and 15%. In order to clarify effects of the PLLA crystallinity on the mechanical properties, the specimens were heat treated isothermally. Results of differential scanning calorimetry indicated that the PLLA crystallinity increased with increasing heat treatment temperature. Bending and compressive tests were conducted on the specimen with different $\beta$-TCP contents and crystallinities. The results show that the bending and compressive moduli increased with increasing $\beta$-TCP contents and crystallinity. On the other hand, bending strength decreased with increasing $\beta$-TCP contents. Maximum bending strength was obtained at the heat treatment of $70^{\circ}C$ for 24 h, whereas compressive 0.2% proof strength increased with increasing heat treatment temperature. This difference is attributed to the difference in the microscopic damages.

• KIEAE Journal
• /
• 제7권3호
• /
• pp.89-96
• /
• 2007

The purpose of this experimental study is to investigate the compressive strength, shear strength, bending strength, and crack control by the mixture of the hwang-toh. The size of compressive specimens is $200{\times}200{\times}400(mm)$, and the size of shear, bending specimens is $200{\times}200{\times}600(mm)$. Finally, crack control specimens for comparative comparison is $200{\times}200{\times}15(mm)$. The mixture of the hwang-toh is as follows; Hwangtoh( H)+Water(W), H+W+Sand(S), H+W+S+sTraw(0.5%), H+W+S+sT(1.0%). The actual height, width, and the length are measured at the center of all specimens. The main parameters are mixture ratio of hwang-toh, straw and age of specimens. The test results are as follows. (1) The compressive strength is linearly increased until 15 weeks according to specimen ages. (2) About crack control, the specimen added in 1% straw is the most effective.

• Journal of the Korean Wood Science and Technology
• /
• 제39권5호
• /
• pp.429-436
• /
• 2011

The selected physical and mechanical properties of non-certificated LVL circulated in domestic lumber market were investigated and compared to relevant standards. The tested LVL passed the moisture content and the soaking delamination rate limit as per domestic (KS) and Japanese standard (JAS). The evaluated mechanical properties were flatwise/edgewise bending strength, modulus of elasticity (MOE), horizontal shear and compressive strength. The 30 mm-thick LVL showed significantly higher bending strength than that of the 25 mm-thick LVL. The modulus of elasticity (MOE) showed same tendency in the results of bending strength. The edgewise bending strength and MOE were higher than that of flatwise bending strength and MOE. The horizontal shear strength values were also showed similar results to bending strength values. The tested results were compared each other and each products were graded according to JAS 701 grade specification. The failure mode of LVL in bending test showed the similar failure mode of solidwood that failed in a simple tension manner (splintery tension). The glue line failure was severe in 25 mm-thick specimens due to concentration of shear stress in layer discontinuity containing small voids and starved glue lines. In horizontal shear strength test, failure mode of LVL showed the typical horizontal shear failure. Compressive specimens failed with fiber crushing in company with apparent delamination that splitted along the length of the specimens. From the results, the complete bonding between lamination and consistency in thin veneer layer were considered as a critical factor in the mechanical properties of LVL. Moreover, the standard test procedure and specification for non-certificated LVL should be required to check the performance of uncertificated materials.

• Journal of the Korean Wood Science and Technology
• /
• 제42권4호
• /
• pp.385-392
• /
• 2014

우리나라의 중요한 조림 수종 중에서 낙엽송을 대상으로 하여, 간벌실시에 따른 물리 역학적 성질을 비교 평가함으로써 간벌 실시가 목재의 재질에 미치는 영향과 양질재 생산 및 목재의 효율적 이용을 위한 연구결과는 다음과 같다. 간벌정도에 따른 시료는 무간벌, 약도간벌, 강도간벌을 실시한 광릉시험림에서 벌채하여 사용하였다. 간벌 정도에 따른 평균 만재율은 무간벌 < 약도간벌 < 강도간벌의 경향이었고 평균 연륜폭은 무간벌 < 약도간벌 또는 강도간벌의 경향이었다. 간벌 정도에 따른 평균 휨강도는 무간벌 > 약도간벌 >강도간벌의 경향이었고 간벌 정도에 따른 평균 압축강도는 무간벌 > 약도간벌 >강도간벌의 경향이었다. 이러한 결과로 낙엽송은 간벌에 의하여 휨 및 종압축강도가 감소하는 경향이었다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권3호
• /
• pp.287-294
• /
• 2015

본 연구는 4개 산지(유고슬라비아, 이탈리아, 영국, 불가리아)의 24년생 글루티노사오리나무를 대상으로 종압축 및 휨강도 특성을 규명하고, 또한 이들을 생장속도(평균연륜폭)와의 관계도 규명하였다. 압축강도는 $231{\sim}326kgf/cm^2$의 범위였고, 산지 간 차이를 보였다. 세 개 산지는 생장이 좋을수록 압축강도 및 압축영계수는 저하되는 것으로 나타났으나, Yugoslavia산지는 생장이 가장 좋으면서도 가장 높은 강도 값을 나타냈다. 휨강도는 $426{\sim}727kgf/cm^2$의 범위였고, 산지 간 차이가 있었다. 휨강도는 생장이 좋을수록 강도 및 영계수가 커지는 것으로 나타났다. 종자 산지가 다른 글루티노사오리나무 중 유고슬라비아산이 좋은 수고생장과, 다른 산지의 약 2배의 흉고직경을 나타내며, 압축, 휨강도에서도 가장 우수하여 생장과 재질면을 고려했을 때 현시점에서 가장 우수한 품종으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제38권3호
• /
• pp.178-184
• /
• 2010

인피섬유로 한지를 제조하고 남은 닥나무 목질부를 고부가가치화 하기 위하여 닥나무 목질부로 파티클 보드를 제조하고 페놀수지 함침율 변화에 따른 닥나무재료 우드세라믹을 제조하여 물성을 검토하였다. 밀도, 휨강도성능, Brinell 경도, 압축강도 등은 수지함침량이 증가할수록 증가하였으며 밀도와 휨강도성능, 경도, 압축강도간 및 휨탄성계수와 강도간에는 유의성이 인정되는 밀접한 상관관계를 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권1호
• /
• pp.58-67
• /
• 2014

울진산 금강송의 재질특성 조사의 일환으로 기계적 성질을 조사하였다. 종압축강도는 $36.2N/mm^2$로 국산 소나무재와 잣나무재보다 다소 낮은 값을 나타내었다. 수로부터의 거리에 따른 종압축강도는 수에서 60 mm 떨어진 지점에서 최대값을 나타내었다. 휨강도는 $76.5N/mm^2$로 나타났으며, 국산 소나무재와 잣나무재보다 다소 높은 값을 나타내었다. 그리고 수로부터 60 mm 떨어진 지점에서 최대값을 나타내었다. 전단강도는 높은 비중을 나타내었던 수 부근에서 $10.4N/mm^2$로 최대값을 나타내었으며, 80 mm 지점에서 $9.1N/mm^2$로 최소값을 나타내었다. 표면경도는 횡단면이 $43.7N/mm^2$, 방사단면이 $12.0N/mm^2$, 접선단면이 $13.7N/mm^2$으로 나타났다. 이러한 결과는 비슷한 비중을 나타낸 소나무의 표면경도 값과 유사하다. 금강송의 기계적 성질은 비슷한 비중을 가지는 소나무과 수종인 소나무 및 잣나무와 비슷하였다. 그리고 금강송의 기계적 성질은 평균연륜폭보다 비중에 의해 더욱 큰 영향을 받는다는 것을 확인할 수 있었다.

• 농업과학연구
• /
• 제2권1호
• /
• pp.257-264
• /
• 1975

This research was attempted as one of a study for investigating optimum contents of fly ash and briquette ash when they were used as admixtures. In mix designs of mortar, fly ash and briquette ash to cement, each of them, was mixed with 0, 5, 10, 15, 20, 25, 30 percent by weight of cement. They were tested for compressive strength, tension strength and bending strength, and these results were summarized as follows; 1. The compressive strength of mortar to add fly ash showed the maximum value at 25 percent. tension strength, 20 percent, bending strength, 15 percent. 2. In case of using briquette ash, compressive strength showed maximum strength at 15 percent. tension strength, 20 percent, bending strength, 20 percent. 3. To add fly ash showed in general more additive effect than to add briquette ash. 4. It was not only to excess standard strength but may be to develop as admixture when briquette ash was used around 20 percent.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.57-60
• /
• 2003

Generally, normal concrete has the disadvantages of low tensile strength, low ductility and volume instability. To improve its performance, fiber reinforced cimentitious composite(FRCC) have been development. These composites are composed of cement, sand, water, a small amount of admixtures, and an optimal amount of fiber like synthetic fiber and steel fiber. This research investigates influence of sand, hybrid fiber and fiber volume fraction, and reports the test results of mechanical properties, fracture behavior and failure pattern of the FRCC. Our experiment was observed that sand mixed FRCC has lower compressive strength and higher bending strength than no sand mixed FRCC, and more steel fiber mixed FRCC has higher compressive strength and bending strength. Hybrid FRCC of steel and polypropylene had superior properties than FRCC of polypropylene only in same fiber volume fraction.