• 제목/요약/키워드: behavior modification

검색결과 638건 처리시간 0.03초

복지차 이용 시 장애인의 불편사항 조사와 개선방안 연구 (A Study on the Improvement and the Survey Study on the Complaints of People with Disabilities in the Use of Disabled Car)

  • 이근민;김동옥
    • 재활복지
    • /
    • 제17권4호
    • /
    • pp.339-370
    • /
    • 2013
  • 본 연구는 장애인 자가 운전 차량과 보호자 운전 차량의 불편사항에 대한 설문조사와 장애인 차량 실차 이용 시 행동조사를 관찰하여 복지차 개발 시 인간공학 설계 기준을 제시하고 불편요소에 대한 개선점을 제안하였다. 본 연구결과는 다음과 같다. 첫째, 자가운전 장애인과 보호자 모두 현재 사용하고 있는 자동차에 대한 불편 정도가 높은 반면, 만족도는 낮은 것으로 나타났다. 둘째, 자가운전 장애인들도 장애인 보호자들이 가장 불편하다고 응답한 부분인 승 하차 시 보조기구 이동에 관해 공통적으로 불편하다고 하였다. 자가운전 장애인 및 보호자 모두 좌석 시트와 안전벨트 착용 시 발생하는 어려움을 호소하여 복지차량개발 시 장애인 보조기구 이동문제와 더불어 장애인 좌석의 보조공학적 설계, 안전벨트의 안전성 문제 등은 반드시 해결되어야 것으로 분석된다. 셋째, 자가운전 장애인보다 보호자들이 장애인 차량에 대한 불편 정도가 높고 만족도도 낮게 나타났는데 이는 장애인 자가운전 차량에 대한 접근성만을 고려한 복지차량 개발의 관점을 바꾸어야 할 것으로 분석된다. 넷째, 자가운전 차량이나 보호자 모두 차량 승 하차 시 탑승을 위한 보조기구 활용보다는 차량운전이나 차량의 다른 여러 가지 안전장치나 편의시설에 대한 관심이 더욱 높은 것으로 나타나 탑승이나 하차 시의 접근성보다는 안전과 편의성을 위한 설계가 우선 고려되어야 할 것으로 분석된다. 다섯째, 복지차를 개발 시 우선적으로 고려해야 할 사항은 사용자의 편의성으로 이를 위해 장애인을 참여시키는 방안이나 관련 전문가들을 참여시키는 방안들이 검토되어야 할 것으로 분석된다.

Red mud를 이용한 중금속 Cd 및 Pb의 흡착제거 특성 (Removal Characteristics of Cd and Pb by Adsorption on Red Mud)

  • 임수빈;김재곤;송호철
    • 한국지반환경공학회 논문집
    • /
    • 제12권7호
    • /
    • pp.39-47
    • /
    • 2011
  • 본 연구에서는 red mud를 흡착제로 이용하여 산성광산배수내 대표적인 유해 중금속인 Cd과 Pb의 흡착특성을 파악하고, 산처리와 소성처리 방식으로 활성화된 red mud에 의한 Cd와 Pb의 중금속 흡착능의 변화를 알아보고자 하였다. Red mud에 대한 Cd과 Pb의 흡착은 반응시간 30분 이내에 대부분 발생하였으며, 5시간 경과 후에는 평형상태에 도달하는 것으로 나타났다. pH가 증가할수록 red mud에 대한 Cd 및 Pb의 흡착은 증가하는 것으로 나타났다. Red mud를 증류수 혹은 산으로 중화 처리하거나 산처리 혹은 소성처리 등과 같은 활성화 처리할 경우 Cd와 Pb에 대한 red mud의 흡착능은 오히려 감소하는 것으로 나타났으므로 red mud를 이용한 Cd와 Pb의 흡착제거는 가공하지 않은 원 상태의 red mud를 이용하는 것이 효과적인 것으로 파악되었다. Red mud에 대한 Cd와 Pb의 흡착거동은 Langmuir 및 Freundlich 등온흡착모델에 모두 잘 적용되었으며, Red mud 흡착제에 대한 Langmuir 등온 흡착식의 $q_m$ 과 Freundlich 등온흡착식의 $K_F$ 상수값은 Cd에 대하여 각각 5.230mg/g와 1.118mg/g이었으며 Pb에 대해서는 각각 22.222mg/g와 7.241mg/g의 값을 나타내고 있었다.

Bi0.5Na0.5TiO3-BiFeO3-SrTiO3 삼성분계 무연 압전 세라믹스의 강유전체-완화형 강유전체 상전이 거동 (Ferroelectric to Relaxor Transition Behavior in Lead-Free Ternary (Bi0.5Na0.5)TiO3-BiFeO3-SrTiO3 Piezoceramics)

  • 이상섭;이창헌;즈엉 짱 안;웬 호앙 티엔 코이;한형수;이재신
    • 한국전기전자재료학회논문지
    • /
    • 제34권1호
    • /
    • pp.1-7
    • /
    • 2021
  • This study investigated the structural, dielectric, ferroelectric, and strain properties of (0.98-x)Bi1/2Na1/2TiO3-0.02BiFeO3-xSrTiO3 (BNT-BF-100xST, x=0.20, 0.22, 0.24, 0.26, and 0.28). All samples were successfully synthesized using the conventional solid-state reaction method and sintered at 1,175℃ for 2 h. The average grain size of the BNT-BF-100x ceramics decreased with increasing ST content. Furthermore, we observed that the ferroelectric- relaxor transition temperature (TF-R) decreased with increasing ST content, which eventually vanished in the BNT-BF-24ST ceramics. The results indicated that a ferroelectric to relaxor phase transition could be induced by ST modification. Consequently, a large electromechanical strain of 633 pm/V at 4 kV/mm was observed for the BNT-BF-26ST ceramics. These results imply that our materials have the competitive advantage of larger strain under lower operating field conditions compared with other BNT-based lead-free piezoelectric ceramics. We expect that BNT-BF-ST lead-free piezoelectric ceramics are promising candidates as a novel ternary BNT-based system and can find potential applications in actuators.

공공 자전거 시스템의 효율적 운용을 위한 모델링 및 시뮬레이션: 세종시 사례 중심 (Modeling and Simulation for Analyzing Efficient Operations on Public Bike System: A Case Study of Sejong City)

  • 배장원;최선한;이천희;백의현
    • 한국시뮬레이션학회논문지
    • /
    • 제30권1호
    • /
    • pp.103-112
    • /
    • 2021
  • 최근 정보통신기술의 발달에 따른 공공 자전거 시스템 운영 사례가 증가하고 있다. 대도시의 공공 자전거 시스템은 시민에 대한 공공성과 편리성을 모두 확보해야하기 때문에, 도입부터 운영까지 다양한 이슈에 대한 분석이 필요하다. 또한, 최근 라스트 마일 수단으로 각광받고 있는 개인 모빌리티 사업과의 공존을 위한 다양한 시나리오 역시 대비할 필요가 있다. 본 논문은 공공 자전거 시스템의 효율적 운영 관리를 위한 시뮬레이션 모델을 제안한다. 특히, 제안한 방법은 공공 자전거 시스템의 일반적인 구조와 행태를 모델링 하여 다른 도시에 쉽게 활용할 수 있는 형태로 개발하였고, 컴포넌트 기반의 모델 구성으로 향후 모델의 수정 및 확장이 용이하도록 개발하였다. 본 논문에서는 제안된 방법의 사례로 세종시 공공 자전거 시뮬레이션을 수행하였다. 세종시 공공 자전거 시스템의 데이터를 적용하여 시뮬레이션 결과를 도출하고, 도출된 결과를 세종시 실데이터와 비교하여 검증하였다. 검증된 모델을 이용하여, 세종시에 적합한 공공 자전거 서비스를 설계하고 분석할 수 있는 도구로 활용될 수 있을 것으로 기대한다.

금형 예열온도에 따른 Al-Cu-Si 3원계 공정합금의 미세조직 변화 (Changes on the Microstructure of an Al-Cu-Si Ternary Eutectic Alloy with Different Mold Preheating Temperatures)

  • 오승환;이영철
    • 한국주조공학회지
    • /
    • 제42권5호
    • /
    • pp.273-281
    • /
    • 2022
  • Al-Cu-Si 3원계 공정합금의 응고거동과 미세조직 변화를 이해하기 위해서, 금형 예열온도를 달리하여 Al-Cu-Si 3원계 공정합금의 미세조직 변화를 관찰하였다. 금형 예열온도가 500℃일 때, 초정 Si과 덴드라이트 형상의 Al2Cu상이 관찰되며, 이후 (α-Al+Al2Cu)의 2원계 공정상이 관찰된다. 금형 예열온도가 300℃일 때 미제조직은 금형 예열온도가 500℃일 때와 유사하나 (α-Al+Al2Cu+Si)의 3원계 공정상이 관찰되는 영역과 관찰되지 않는 영역이 나타난다. 금형 예열온도가 150℃인 경우에는 미세조직이 (α-Al+Al2Cu)의 2원계 공정상과 (α-Al+Al2Cu+Si)의 3원계 공정상이 관찰되는 Bimodal 구조를 나타낸다. 금형 예열온도를 달리 하였을 때 가장 큰 변화를 나타내는 상은 Si상이며, 임계냉각속도를 지나면 (α-Al+Al2Cu+Si)의 3원계 공정상이 형성되는 순간에 빠른 냉각에 의한 Si의 성장이 억제되면 Cooperative 성장을 하기 때문에 Al, Cu의 성장도 함께 억제된다. 서로 다른 합금설계 전산모사 프로그램을 통해 Al-27wt%Cu-5wt%Si의 3원계 공정 합금을 분석한 결과, 합금설계 전산모사 프로그램에 따라 결과의 차이가 발생하며, 전산모사의 신뢰성을 높이기 위해서는 실제 주조를 통한 미세조직 분석이 수반되어야 한다.

과전압 거동 분석을 통한 리튬 금속 음극의 전착/탈리 현상 이해 (A Review on the Deposition/Dissolution of Lithium Metal Anodes through Analyzing Overpotential Behaviors)

  • 한지원;진다희;김수환;이용민
    • 전기화학회지
    • /
    • 제25권1호
    • /
    • pp.1-12
    • /
    • 2022
  • 리튬이온전지의 성능과 안전성을 뛰어넘는 다양한 차세대전지 개발이 진행되고 있다. 특히, 흑연을 대신할 고용량 음극 소재로 리튬 금속을 사용하는 연구는 여전히 활발히 이뤄지고 있지만, 높은 충전 전류 밀도에서 형성되는 덴드라이트는 리튬 금속 전극 상용화에 가장 큰 걸림돌이다. 이에 따라, 전해질 첨가제, 보호막 도입, 리튬 형상 제어 등 다양한 접근법으로 덴드라이트 문제를 개선하기 위한 연구가 진행되어 왔으며, 중요한 실험 결과 중 하나로서 가장 많이 보고되는 것이 리튬 대칭셀을 이용한 과전압 거동 분석이다. 이 과전압 거동은 크게 세 단계로 구분될 수 있지만, 대부분의 연구에서는 단순히 제어 변수에 따른 과전압 감소나 대칭셀 수명 차이로 각 접근법이 덴드라이트 형성 제어에 효과적임을 주장하고 있다. 또한, 각 과전압 거동을 자세히 살펴보면, 리튬 핵 생성 및 성장되는 전착 과정이나 탈리 조건에 크게 영향을 받고 있음에도, 이에 대한 해석은 제한적으로 이뤄지고 있다. 뿐만 아니라, 전착/탈리 과정이 장기간 반복됨에 따라, Dead 리튬 형성으로 인한 물질전달 제한이 과전압에 영향을 주고 있음이 명확히 언급되고 있지 않다. 따라서, 본 총설에서는 이러한 리튬 대칭셀 과전압 분석에 있어, 각 과전압 거동에 대한 이론적 배경을 자세히 설명하고, 전해질 조성, 분리막, 리튬 형상 제어, 리튬 표면 개질에 따른 과전압 거동 분석 결과를 재조명한다.

Effect of modifying the thickness of the plate at the level of the overlap length in the presence of bonding defects on the strength of an adhesive joint

  • Attout Boualem;Sidi Mohamed Medjdoub;Madani Kouider;Kaddouri Nadia;Elajrami Mohamed;Belhouari Mohamed;Amin Houari;Salah Amroune;R.D.S.G. Campilho
    • Advances in aircraft and spacecraft science
    • /
    • 제11권1호
    • /
    • pp.83-103
    • /
    • 2024
  • Adhesive bonding is currently widely used in many industrial fields, particularly in the aeronautics sector. Despite its advantages over mechanical joints such as riveting and welding, adhesive bonding is mostly used for secondary structures due to its low peel strength; especially if it is simultaneously exposed to temperature and humidity; and often presence of bonding defects. In fact, during joint preparation, several types of defects can be introduced into the adhesive layer such as air bubbles, cavities, or cracks, which induce stress concentrations potentially leading to premature failure. Indeed, the presence of defects in the adhesive joint has a significant effect on adhesive stresses, which emphasizes the need for a good surface treatment. The research in this field is aimed at minimizing the stresses in the adhesive joint at its free edges by geometric modifications of the ovelapping part and/or by changing the nature of the substrates. In this study, the finite element method is used to describe the mechanical behavior of bonded joints. Thus, a three-dimensional model is made to analyze the effect of defects in the adhesive joint at areas of high stress concentrations. The analysis consists of estimating the different stresses in an adhesive joint between two 2024-T3 aluminum plates. Two types of single lap joints(SLJ) were analyzed: a standard SLJ and another modified by removing 0.2 mm of material from the thickness of one plate along the overlap length, taking into account several factors such as the applied load, shape, size and position of the defect. The obtained results clearly show that the presence of a bonding defect significantly affects stresses in the adhesive joint, which become important if the joint is subjected to a higher applied load. On the other hand, the geometric modification made to the plate considerably reduces the various stresses in the adhesive joint even in the presence of a bonding defect.

국내 토지이용별 MUSLE 유출인자의 계수 및 지수 적용을 통한 토양유실 발생 및 거동 분석 (Occurrence and Behavior Analysis of Soil Erosion by Applying Coefficient and Exponent of MUSLE Runoff Factor Depending on Land Use)

  • 이서로;이관재;양동석;최유진;임경재;장원석
    • 한국습지학회지
    • /
    • 제21권spc호
    • /
    • pp.98-106
    • /
    • 2019
  • SWAT(Soil and Water Assessment Tool) 모형 내 MUSLE(Modified Universal Soil Loss Equation) 유출인자의 계수 및 지수는 각각 11.8과 0.56으로 토지이용별 토양유실 산정에 동일하게 적용되는 문제점이 있다.이는 결과적으로 토양유실량을 과대 또는 과소 평가할 수 있으며, 결과적으로 우심지역 선별과 저감 대책에 따른 효율 평가에 문제를 발생시킬 수 있다. 그러나 아직까지 토지이용별 MUSLE 유출인자에 대한 계수 및 지수 산정과 이에 대한 SWAT 모형 내 적용성 평가가 이루어진 바 없다. 따라서 국내 유역을 대상으로 토양유실 발생 및 거동을 정확하게 예측하기 위해서는 토지이용별 유출인자의 계수 및 지수 산정과 이에 대한 SWAT 모형 내 적용성 평가가 필요하다. 이에 본 연구에서는 가아천 유역을 대상으로 토지이용별 유출인자의 계수 및 지수를 산정하고, SWAT 모형 내 적용에 따른 토양유실 및 유사유출 발생량 차이를 비교 분석하였다. 본 연구에서 산정된 토지이용별 유출인자의 계수 및 지수는 국내 고랭지 유역에서의 토양유실 발생 특성을 잘 반영하고 있는 것으로 분석되었다. 또한 토지이용별 유출인자의 계수 및 지수 적용에 따라 유역에서의 토양유실 및 유사유출 발생량 값은 큰 차이를 보이는 것으로 분석되었다. 따라서 국내 유역을 대상으로 기존에 미국에서 개발된 MUSLE를 적용하기 위해서는 토지이용별 유출인자의 계수 및 지수에 대한 충분한 수정·보완 과정이 중요시되어야 할 것으로 판단된다. 향후 본 연구의 결과는 비점오염원관리지역 내 토양유실 우심지역 선별과 토양유실 저감 대책 수립 및 평가를 위한 기초자료로 활용될 수 있으리라 판단된다.

정보기술 수용에서 사용용이성과 통제가능성을 하위 차원으로 하는 지각된 사용통제의 역할 (Roles of Perceived Use Control consisting of Perceived Ease of Use and Perceived Controllability in IT acceptance)

  • 이웅규
    • Asia pacific journal of information systems
    • /
    • 제18권2호
    • /
    • pp.1-14
    • /
    • 2008
  • According to technology acceptance model(TAN) which is one of the most important research models for explaining IT users' behavior, on intention of using IT is determined by usefulness and ease of use of it. However, TAM wouldn't explain the performance of using IT while it has been considered as a very good model for prediction of the intention. Many people would not be confirmed in the performance of using IT until they can control it at their will, although they think it useful and easy to use. In other words, in addition to usefulness and ease of use as in TAM, controllability is also should be a factor to determine acceptance of IT. Especially, there is a very close relationship between controllability and ease of use, both of which explain the other sides of control over the performance of using IT, so called perceived behavioral control(PBC) in social psychology. The objective of this study is to identify the relationship between ease of use and controllability, and analyse the effects of both two beliefs over performance and intention in using IT. For this purpose, we review the issues related with PBC in information systems studies as well as social psychology, Based on a review of PBC, we suggest a research model which includes the relationship between control and performance in using IT, and prove its validity empirically. Since it was introduced as qa variable for explaining volitional control for actions in theory of planned behavior(TPB), there have been confusion about concept of PBC in spite of its important role in predicting so many kinds of actions. Some studies define PBC as self-efficacy that means actor's perception of difficulty or ease of actions, while others as controllability. However, this confusion dose not imply conceptual contradiction but a double-faced feature of PBC since the performance of actions is related with both self-efficacy and controllability. In other words, these two concepts are discriminated and correlated with each other. Therefore, PBC should be considered as a composite concept consisting of self-efficacy and controllability, Use of IT has been also one of important areas for predictions by PBC. Most of them have been studied by analysis of comparison in prediction power between TAM and TPB or modification of TAM by inclusion of PBC as another belief as like usefulness and ease of use. Interestingly, unlike the other applications in social psychology, it is hard to find such confusion in the concept of PBC in the studies for use of IT. In most of studies, controllability is adapted as PBC since the concept of self-efficacy is included in ease of use explicitly. Based on these discussions, we can suggest perceived use control(PUC) which is defined as perception of control over the performance of using IT and composed of controllability and ease of use as sub-concepts. We suggest a research model explaining acceptance of IT which includes the relationships of PUC with attitude and performance of using IT. For empirical test of our research model, two user groups are selected for surveying questionnaires. In the first group, there are freshmen who take a basic course for Microsoft Excel, and the second group consists of senior students who take a course for analysis of management information by Excel. Most of measurements are adapted ones that have been validated in the other studies, while performance is real score of mid-term in each class. In result, four hypotheses related with PUC are supported statistically with very low significance level. Main contribution of this study is suggestion of PUC through theoretical review of PBC. Specifically, a hierarchical model of PUC are derived from very rigorous studies in the relationship between self-efficacy and controllability with a view of PBC in social psychology. The relationship between PUC and performance is another main contribution.

Hydrocolloid의 첨가가 밀가루 반죽의 특성에 미치는 영향 (Effects of hydrocolloids on wheat flour rheology)

  • 임경숙;황인경
    • 한국식품조리과학회지
    • /
    • 제15권3호
    • /
    • pp.203-209
    • /
    • 1999
  • 여러가지 종류의 hydrocolloid를 0.005%, 0.01%, 0.02% 수준으로 첨가하여 면제조를 위한 밀가루 반죽의 성질을 살펴본 결과, 색도에 있어서는 hydrocolloid 첨가에 따라 모두 L값은 감소하면서 b값은 증가하는 경향을 보였다. 첨가수준이 높아질수록 효과는 크게 나타났으며, alginate, guar, locustbean등이 원래의 반죽과 비슷하거나 약간의 개선효과를 보였다. 호화도 양상에 있어서는 호화개시온도에는 영향이 없었으나, 최고점도는 carrageenan, xanthan이 증가하였고, guar는 별다른 영향을 보이지 않았다. 점도붕괴도는 carrageenan, guar, xanthan에서 증가하였고, 노화도는 carrageenan, guar, locustbean, xanthar에서 모두 증가하였다. 텍스쳐측정 결과 hydrocolloid첨가에 따라 견고성은 증가하였고 탄성은 guar, locustbean만이 감소하지 않았다. 이차인자인 검성은 carrageenan, CMC, guar, locustbean의 0.002%에서, 씹힘성은 CMC, guar의 0.002%에서 증가하였다. 절단력은 농도수준이 높아질수록 증가하였고, 그 효과는 guar에서 현저하였다. 이상의 결과로 볼 때, 면류의 품질에 있어 색도 및 견고성, 응집성 및 탄력성이 중요하고 우리나라 사람들의 국수에 대한 선호도는 탄력성이 크고 쫄깃쫄깃한 성질과 탄력성이 크면서도 부드러운 성질의 면에 대해 크다는 것을 고려해보면 견고성, 검성, 씹힘성의 증가가 큰 guar와 locustbean이 가장 국수의 성질에 바람직한 영향을 줄 것으로 사료되며, 이에 따라 반죽의 성질뿐 아니라 실제 국수를 만들었을 때 텍스쳐 변화와 관능평가등에 대한 더 많은 연구결과가 필요할 것으로 생각된다. 0.4 cm 깊이의 선량이 94%, 94%로 가장 이상적으로 관찰되었다. 보여 주었다. in vivo상에서 흰쥐를 이용한 항피로효과 실험을 위하여 양파 농축물과 마늘 농축물을 각각 사료 500 g당 양파, 마늘의 양으로 10 g, 5 g, 2.5 g을 첨가하여 실험에 사용하였고, 양파음료는 음료 그대로를 음용수 대신에 사용하여 흰쥐의 유영시간을 실험한 결과 사료 500g당 양파 2.5g 첨가시 13%의 감소를 보여 주었으나 5g 첨가시는 대조군과 거의 같은 유영시간을 나타내었고 109g 첨가시는 57%의 증가를 나타내었다. 마늘에 있어서도 이와 유사한 실험결과를 보여 주었으며 2.5g 첨가시 26%의 감소를 5g 첨가시는 12%의 증가를 보여주었고 10g 첨가시는 59%의 증가를 보여주었다. 특히 양파음료는 가장 높은 효과인 72%의 증가를 보여 주었는데 이는 양파의 효능과 더불어 감미제로 사용된 당류의 영향이 아닌가 사료된다.례음식과 상차림에 대한 중요성에 대한 인식은 비교적 높은 편이나 알고 있으며 행하는 정도는 몇몇 상차림을 제외하고는 많은 상차림에 대하여 낮았음을 볼 수 있었다. 집안의 여러 가지 풍속과 생활습관, 음식솜씨들을 친정어머니와 시어머니를 통하여 물려받는다는 것을 알 수 있었는데 이러한 맥락에서 다양한 문화와 함께 살고 있는 재미 2세들의 한국 전통음식문화의 계승은 어려움이 많으리라 사료된다. 주부 자신들의 전통음식에 대한 진정한 이해와 함께 우리음식의 뿌리를 내리고 외국음식과 조화를 이루어 나가도록 하는 적극적인 노력이 필요할 것이다. 그러므로 또한 재미한인 사회에서의 한국전통음식에 대한 홍보, 교육 강화와 함께 재미교포들 모두 관심과 실행이 촉구되어져야 하겠다., ‘아니오’의 경우 무학(44.1%)이 다른 집단에 비하여 상대적으로 가장 높은 비율을 차지하였다.

  • PDF