• 제목/요약/키워드: behavior and strength

검색결과 6,206건 처리시간 0.039초

ePTFE 인공혈관에 대한 파클리탁셀의 코팅 및 방출거동 (Paclitaxel Coating on ePTFE Artificial Graft and the Release Behavior)

  • 임순용;김철주;김은진;권오경;권오형
    • 폴리머
    • /
    • 제36권3호
    • /
    • pp.326-331
    • /
    • 2012
  • 본 연구에서는 혈액투석 시 필요한 혈관접근통로로 활용되는 expanded poly(tetrafluoro ethylene)(ePTFE) 인공혈관을 표면 개질하였다. 생분해성 합성고분자인 poly(D,L-lactide-$co$-glycolide)(PLGA)와 함께 항암제로서 뿐만아니라 항증식제제로서 널리 쓰이고 있는 파클리탁셀을 인공혈관 표면에 코팅함으로써 PLGA가 생분해됨에 따라 파클리탁셀을 서방할 수 있도록 고안하였다. 인공혈관의 다공구조 특성을 유지하면서 인공혈관 표면에 1.96 mg/$cm^2$의 PLGA가 코팅되었음을 ATR-FTIR을 통해 확인하였다. 또한 0.263 mg/$cm^2$의 파클리탁셀이 인공혈관에 코팅되었음을 HPLC로 확인하였다. PLGA를 코팅함으로써 인공혈관의 모듈러스는 감소하였으나 인장강도는 향상되었다. 약물방출 실험 결과 PLGA의 생분해거동에 동반하여 코팅된 파클리탁셀의 약 35%가 28일 동안 지속적으로 방출되었다. 이러한 지속적인 파클리탁셀의 방출은 장기간에 걸쳐 신내막 과형성증을 억제하여 혈관의 개존율을 향상시킬 것으로 기대된다.

다축응력 상태에 놓인 콘크리트외 크리프 특성에 관한 실험 연구 (Experimental Studies on Creep of Concrete under Multiaxial Stresses)

  • 권승희;김선영;김진근;이수곤
    • 콘크리트학회논문집
    • /
    • 제16권2호
    • /
    • pp.185-194
    • /
    • 2004
  • 콘크리트의 크리프에 관한 기존의 연구결과들은 대부분 1축응력이 가해지는 경우에 대한 것으로 콘크리트 구조물 또는 부재가 다축응력 상태에 놓이는 경우에 적용하기가 어려운 점이 있다. 따라서 다축응력 상태의 콘크리트 크리프 특성에 관한 연구가 필요하다. 이 연구에서 다축응력 상태에 놓인 콘크리트의 크리프 특성을 실험을 통해 파악하였다. 세 가지 서로 다른강도를 갖는 배합의 콘크리트에 대해 각각 9개의 실험체를 제작하였으며, 1축, 2축, 3축 응력 상태에서 크리프 실험을 실시하였다. 하중이 가해지는 세 방향에서 시간에 따른 변형률을 측정하였다. 가압시점의 푸아송비와 크리프변형에 기인한 푸아송비 그리고 탄성변형과 크리프변형에 기인한 푸아송비를 구하였으며, 각 콘크리트에 대한 세 가지 푸아송비는 근사적으로 같은 것으로 나타났다. 가압시점의 푸아송비와 전체 변형에 대한 푸아송비는 콘크리트 강도의 증가에 따라 다소 증가하는 경향을 보였으며, 각 푸아송비는 응력상태에 따라 특정한 경향을 나타내지 않았다. 체적성분의 응력과 크리프변형률, 편차성분의 응력과 크리프변형률은 선형의 관계를 나타내었다.

Structure & Installation Engineering for Offshore Jack-up Rigs

  • 박주신;하영수;장기복
    • 대한조선학회지
    • /
    • 제54권4호
    • /
    • pp.39-46
    • /
    • 2017
  • 잭업 드릴링 리그는 해양 원유 및 가스개발 분야에 폭넓게 사용되어지고 있다. 초기 모델은 수심 60미터 이하의 천수영역에서 운용되었고, 최근에는 대수심 150미터와 가혹한 환경조건에 대응하도록 개발이 되어 왔다. 본 기고에서는 북해 유전에 사용되는 잭업리그의 전선해석을 수치해석방법을 통하여 검토하였다. 첫번째로, 북해의 환경조건을 분석하고, 해저지질조사 보고서를 통하여 지질특성을 확인하였다. 조사자료를 근거로 기본도를 작성할 수 있는 설계사양을 수립하였다. 북해에 설치된 잭업리그의 동적특성을 규명하기 위해서, 전선해석 시 레그와 선체를 고려한 전도모멘트를 계산하고, 잭업리그 leg & 선체구조의 건전성 확인을 위하여, 국제코드를 활용한 구조강도 평가 수행으로 안전성을 검토하였다. 잭업하는 도중 발생할 수 있는 불확실성 요소들은 해저면의 특성에 크게 관련되어 있으며, 일반적으로 pre-loading하는 과정 중에 자주 발생한다. 이 기고에서는 잭업리그의 운용하는 사이클 내에서 발생 가능한 구조적 안전성을 검증하기 위하여 상세구조 및 설치엔지니어링 문제에 대해서 분석하였다. 이러한 목적에 부합하기 위하여 아래의 사항들을 검토하였다. - 해저지질 조건을 고려한 구조붕괴거동 - Pre-loading 절차서 및 매개변수에 의한 붕괴모드 - 계측자료의 검증 및 구조엔지니어링 결과.

  • PDF

도서지역 주민의 건강상태에 관한 연구 (A Study on The Health Status of Island Community People in Island)

  • 신경림
    • 성인간호학회지
    • /
    • 제12권2호
    • /
    • pp.296-310
    • /
    • 2000
  • During the past 10 years, concern for community people's health has increased together with the changes. Public health policies and studies for community people's health, however, have influenced those in childmaternal health care to want more general coverage and studies of health and wellness. Particularly, the study of community people's health in the extent an island area is almost rare as that personal and the material benefits in this area are lacking of community people's work is large, and the basic elements of living, such as diet and elimination, are irregular due to the schedule of the tide. Thus, there are many potential health problems. In this regard, the study attempted to understand the health problems of island community people and to provide a basis for developing health promotion and health education programs. In collecting data for the study, face to face interviews were made through a structured questionnaire from October 1 to December 30, 1996. Collected data were analyzed with the SAS statistics program, descriptive statistics, t-test and ANOVA. Subjects' health status was examined by classifying into such categories as their health perception, complaints of health problem, related lifestyle, psychosocial health staus, the result of examination is as follows; 1. For subjects' health perception, 26.9% of the subject answered not sick, but not so healthy'; 30.9% thought they were healthy, while 22.9% answered that they were not healthy. 2. For the health problem complaints many complained of pains in their muscles and skeletal system, especially knee joint pain. Women's health problems related with breast and the reproductive system included 52.3% of cases doing breast self examination, while 56.55% received the cervical cancer screening test. In men's health problems, 44.2% of subjects answered that they have moderate to severe BPH(Benign Prostatic Hypertrophy) symptom. 3. There were statistically a significant difference in the degree of physical health according to marital status(p=0.0028), occupation(p=0.0442), income(p=0.0357). 4. For stress status, 17.2% was to need the intervention, 50.2% was to need observation. 5. The mean score of self-esteem was 27.7 showing a relatively high score. 6. For the rate of smoking, 37.7% used to smoke, while 28% used to take alcohol. 7. The rate of substance abuse was 45.9% of subjects. 8. Most of subjects' health behaviors included most of the acupuncture (52%). 9. The rate of subjects receiving comprehensive medical testing was 34.36% while 34.78% did after care managing behavior. 10. For the obesity grade, 53% is normal weight, low-weight 32.8%, obesity 33%. 11. For nutrition status, 78.7% illy balanced to need intervention of nutritional education. 12. For 78.7% of subjects, muscle strength and 40.7% of stretching were not good enough to need health education on physical exercises. Therefore, based on the results, appropriate health education programs need to be developed to promote health of community people on an island.

  • PDF

불포화토 사면 안정해석에서 선행강우의 영향에 관한 연구 (Influence of Antecedent Rainfall in Stability Analysis of Unsaturated Soil Slope)

  • 이영생;윤승현
    • 대한토목학회논문집
    • /
    • 제35권5호
    • /
    • pp.1073-1082
    • /
    • 2015
  • 불포화토 사면 거동은 불포화토의 수리학적 특성 및 역학적 특성, 지반 투수계수, 지반 내 지층 구조, 강우조건 즉 강우강도, 강우패턴, 강우 지속시간, 선행강우 등의 영향을 받는다. 이와 같은 여러 요소 중 산사태는 사면 파괴 당시 강우조건보다 그 이전에 발생했던 선행강우의 영향을 크게 받는 것으로 알려져 있어 선행강우의 영향은 사면 안정성 해석에서 중요한 요소로 작용할 것으로 예상된다. 따라서 강우에 의한 산사태 발생을 예측하고 대책을 마련하기 위하여 선행강우에 따른 사면 내 모관흡수력 분포를 반드시 고려하여야 하며 이후에 발생한 강우특성을 반영하여 사면 안정성 검토를 수행하여야 할 것으로 판단된다. 본 연구의 경우 실트질 흙 함량 구성을 5%, 10%, 20%로 달리한 3가지 시료를 조성한 후 각각의 시료에 대하여 흙-함수특성곡선 시험을 수행하여 관련 매개변수들을 분석하였다. 한 달 동안의 선행강우 적용과 집중호우에 해당하는 12시간 동안의 강우가 지속적으로 내릴 때 불포화토 내 모관흡수력 분포 및 응력, 강도와 같은 역학적 특성 변화 등을 분석하고 사면안정 수치해석을 수행한 후 선행강우와 흙-함수특성곡선이 사면의 안정에 미치는 영향을 비교, 분석하였다.

수종 광중합 복합 레진의 중합 깊이와 광조사 시간에 따른 중합률에 관한 연구 (A STUDY ON THE DEGREE OF CONVERSION OF LIGHT CURING COMPOSITE RESIN ACCORDING TO THE DEPTH OF CURE AND LIGHT CURING TIME)

  • 김경현;권오승;김현기;백규철;엄정문;권혁춘
    • Restorative Dentistry and Endodontics
    • /
    • 제22권1호
    • /
    • pp.35-60
    • /
    • 1997
  • Physical properties of composite resins such as strength, resistance to wear, discoloration, etc, depend on the degree of conversion of the resin components. The clinical behavior of restorative resins varies brand to brand. Part of this variation is associated with the filler and differences in the polymer matrix. The polymer matrix of resins may differ because the involved monomers are dissimilar and because of variation in the catalyst system. The purpose of this study was to evaluate the degree of conversion of the composite resins according to the depth of cure and light curing time. 7mm diameter cylindrical aluminum molds were filled with each of five different hybrid light curing composite resins(Z-100, Charisma, Herculite XRV, Prisma TPH, Veridonfil) on the thin resin films. The molds were 1mm, 2mm, 3mm, 4mm, and 5mm in depth to produce resin films of various heights. Each sample was given 20sec, 40sec, and 60sec illumination with a light source. The degree of conversion of carbon double bonds to single bonds in the resin films was examined by means of Fourier Transform Infrared Spectrometer. The results were obtained as follows; 1. There was difference in the degree of conversion among five light curing composite resins according to the depth of cure for 20sec, 40sec, and 60sec illumination with light source with statistical significance(P<0.05). 2. Five light curing composite resins show lower degree of conversion at surface of the resin than depth of 1mm. 3. The degree of conversion of five light curing composite resins was siginificantly reduced from the maximum for the resin film when the light passed through as little as 1mm of each composite. 4. The degree of conversion of five light curing composite resins decrease significantly at the depth of 4mm, and polymerization was not occured at the depth of 5mm except for Prisma TPH. 5. The degree of conversion of five light curing composite resins was increased with increased light curing time, and there was no significant differences in the degree of conversion above 4mm in Z-100, 3mm in Charisma, and at depth of 5mm in Herculite XRV and Veridonfil(P>0.05).

  • PDF

실리카 복합소재의 물성에 따른 DLP 3D printing 적용 연구 (The effect of silica composite properties on DLP-stereolithography based 3D printing)

  • 이진욱;남산;황광택;김진호;김응수;한규성
    • 한국결정성장학회지
    • /
    • 제29권2호
    • /
    • pp.54-60
    • /
    • 2019
  • 최근 3D 프린팅 기술은 산업적인 응용분야의 확대를 위해 다양한 복합소재의 적용이 연구되고 있다. 기존 3D 프린팅 기술은 대부분 플라스틱 소재 위주로 개발되어 왔으며, 세라믹 소재의 경우 물리적, 화학적으로 우수한 물성을 가지고 있음에도 불구하고 상대적으로 3D 프린팅 적용을 위한 연구개발이 초기 단계에 머무르고 있다. 본 연구에서는 DLP(digital light processing) 3D프린팅 공정에 적용을 위해 다양한 입도의 실리카를 기반으로 광경화성 복합소재를 합성하였다. 다양한 적층 방식의 3D 프린팅 기술 중에서 DLP 3D 프린팅 방식은 광경화성 수지에 빛을 조사하여 3차원 기물을 제조하는 기술로 정밀도가 우수하고 다양한 소재 적용성이 높다. 합성된 실리카 복합소재의 충진율에 따른 유변학적 거동분석을 통하여 DLP 3D 프린팅 적용가능성을 확인하였고, 원활하게 적층조형이 잘 이루어지는 것을 확인하였다. 3D 프린팅된 시편의 인쇄 정확도는 디자인과 약 3 % 미만의 차이를 나타내었고, 실리카 입자의 충진율이 80 wt%일 때 34.3 MPa의 강도를 나타내었다.

GFRP 보강적층판 및 GFRP rod를 이용한 낙엽송 집성재 접합부의 모멘트저항 성능평가 (Moment Resistance Performance Evaluation of Larch Glulam Joints using GFRP-reinforced Laminated Plate and GFRP Rod)

  • 정홍주;송요진;이인환;홍순일
    • Journal of the Korean Wood Science and Technology
    • /
    • 제44권1호
    • /
    • pp.40-47
    • /
    • 2016
  • 구조용 집성재 라멘 접합부에 일반적으로 사용되는 접합철물을 대신하여 단판과 GFRP (Glass Fiber Reinforced Plastic)를 복합시킨 GFRP 보강적층판과 삽입 접착형 GFRP rod를 접합물로 사용하였다. 이들을 적용시킨 접합부에 대한 모멘트저항 성능평가 결과, 접합철물을 이용한 실험체(Type-1)와 비교하여 GFRP 보강적층판과 GFRP rod 핀을 사용한 실험체의 항복모멘트는 4% 낮게 측정되었으나 회전강성은 29% 높게 측정되었다. 또한 GFRP 보강적층판과 목재(Eucalyptus marginata)핀을 사용한 실험체는 Type-1 실험체와 비교하여 항복모멘트 11%, 회전강성 56% 높게 측정되며 가장 양호한 성능을 나타냈었다. 파괴형상과 완전탄소성 분석을 통해서도 핀에 의한 전단내력으로부터의 취성파괴가 아닌 연성거동을 나타내며, 접합내력이 상승하고 부재의 일체화가 이루어짐을 확인하였다. 반면, GFRP rod를 삽입 접착한 실험체는 접착 불량으로 측정이 불가하거나 접합성능이 매우 낮게 측정되었다.

초고성능 섬유보강 콘크리트(UHPFRC)의 재료 특성 및 예측모델: (II) 구속 수축 특성 평가 및 구속도 예측 (Properties and Prediction Model for Ultra High Performance Fiber Reinforced Concrete (UHPFRC): (II) Evaluation of Restrained Shrinkage Characteristics and Prediction of Degree of Restraint)

  • 류두열;박정준;김성욱;윤영수
    • 대한토목학회논문집
    • /
    • 제32권5A호
    • /
    • pp.317-325
    • /
    • 2012
  • 본 연구에서는 초고성능 섬유보강 콘크리트(Ultra High Performance Fiber Reinforced Concrete, UHPFRC)의 구속 상태에서의 수축 거동을 평가하고자 국내 외에서 가장 보편적으로 사용되는 링-테스트(ring-test)를 이용하여 구속 수축 실험을 수행하였다. 특히, 다양한 구속도에서의 수축 거동을 평가하기 위하여 내부 강재 링의 두께와 내부 반경을 달리하여 실험을 수행하였으며, 자유 수축과 인장강도 실험을 수반하여 구속도 및 응력 이완, 수축 균열 가능성 등을 복합적으로 평가하였다. 실험 결과 내부 링의 두께가 증가할수록 내부 링의 평균 변형률과 잔류 인장응력은 감소하였으며, 반면에 구속도는 증가하는 경향을 보였다. 내부 링의 반경에 따라서는 변형률 및 잔류 인장응력, 구속도의 차이가 거의 없는 것으로 나타났다. 모든 시험체에서 잔류 인장응력이 인장강도에 비해 작은 것으로 나타났으며, 수축 균열은 발생하지 않았다. 지속적으로 작용하는 계면 구속 하중에 의해 탄성 수축 응력의 약 39~65%가 이완되는 것으로 나타났으며, 최대 이완 응력은 내부 링의 두께가 두꺼울수록 증가하는 것으로 나타났다. 마지막으로 본 연구에서는 비선형 회귀분석을 수행하여 재령에 따라 변하는 구속도를 예측하였으며, 실험 결과와 잘 일치하는 것으로 나타났다.

Epoxy수지에 의한 견직물의 Sericin정착 (Fixation of Sericin of Silk Fabric by Epoxy Resin)

  • 문영배;남중희
    • 한국잠사곤충학회지
    • /
    • 제26권2호
    • /
    • pp.16-25
    • /
    • 1984
  • 수용성염의 존재하에서 여러 가지 용매상에 소정시간, 소정온도로 epoxy수지에 의한 견직물의 sericin정착을 행하였다. Potassium thiocyanate염의 촉매하에서 glycero1 glycidyl ether(EX-313)와 ethylene glycol diglycidylether(EX-810)의 4염화탄소용액중에서의 반응에서 높은 수지부착률을 얻었으며, 정착효과가 뛰어난 것을 알 수 있었다. 얻어진 결과를 요약하면 다음과 같다. 1. 사용한 두 수지는 반응 거동이 유사하였으며, EX-810이 수지부착률이나 정착효과면에서 뛰어 났다. 2. 수지부착률은 반응온도나 반응미간에 따라 증가하였고, 90분 7$0^{\circ}C$에서 연감률은 평형에 도달하였다. 3. 수지부착률과 연감률은 3~5%의 수지농도에서 평형에 달하였다. 4. 촉매의 N농도에 따라 부착률은 현저하게 증가하고 0.5N에서 연감률은 평형에 달하였다. 5. 침지시간의 증가와 더불어 부착률은 완만하게 증가하지만 연감률은 15분간 침지에 평형에 도달하였다. 6. 건조온도의 영향은 없는 것으로 보인다. 7. 수분율의 감소는 미약하여, epoxy 수지에 의한 sericin 정착시 수분율을 유지할 수 있는 가능성을 시사하는 것이라 생각된다. 8. 소수성이 강한 용매인 4염화탄소, p-chloroeth-ylene, cyclohexane, xylene, toluene 등이 정착효과가 뛰어남을 알 수 있다. 9. Sericin 정착포의 물성을 시험한 결과 정착효과가 뛰어날 수록, 유연도는 감소하고, 방추도도 감소하며 강도와 신도는 증가하는 것을 알 수 있었다.

  • PDF