• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.842-847
• /
• 2008

Despite of the increasing number of the application of the drilled shaft pile in construction site, most of the study of pile capacity has been centered side shear resistance. But it is common that the drilled shaft is socketed on the rock so as to use the bearing resistance, so prediction of the toe's movement and characteristic of the bearing capacity is important as the side shear resistance. Therefore the model tests were performed in order to study the characteristic of bearing capacity on rock mass. The material of the test blocks were the mortar which was mixed with sand, cement and water, and test block size was $240{\times}240{\times}240mm$. Load was pressed by the 45mm of diameter of miniaturized pile and plate jack and steal plate were used to the confined stress for representing the underground condition. The relation of load-displacement was measured in many different conditions of rock mass such as direction of discontinuities, spacing and strength, and q-w curves of the toe of the pile were verified in each condition.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.20-27
• /
• 2004

Reinforced twice than width of foundation with SIC under steel piles drived in cohesion soil and in the coal-limestone which heavily fractured. To analyze behaviour characteristic of steel piles, load transfer test was performed to steel piles attached with strain gauges to axial direction. After it passed 49days, dynamic load test was performed to set-up effect of steel piles bearing capacity. The results of test were compared to each other. According to the results, as the skin friction of steel pile was on the same condition, end bearing capacity of steel piles established on SIC solid of cemented milk in cohesion soil was three times than steel piles established on SIG solid of cemented milk in heavily fractured coal- limestone. After piles were driven and passes 49days, in case of piles on SIG solid of comented milk in cohesion soil the increaes of allowable bearing capacity was 442.9% and allowable bearing capacity of piles on SIG solid of cemented milk in heavily fractured coal-limestone increased 22.4%.

• 산업기술연구
• /
• 제18권
• /
• pp.7-16
• /
• 1998

This paper is an experimental study of investigating the reinforcing effect and the behavior of cohesionless slope installed with reticulated root pils. Reduced scale model tests with plane strain conditions were performed to study the behavior of the strip footing located on the surface of cohesionless slopes reinforced with root piles. Model tests were carried out with Jumunjin Standard Sand of 45% relative density prepared by raining method to have an uniform slope foundation during tests. Slope of model foundation was 1 : 1.5 and a rigid model slop. Parametric model tests were performed with changing location of model footing, arrangements of root piles and angles of pile installation. On the other hands, the technique with camera shooting was used to monitor sliding surface formed with discontinuty of dyed sand prepared during formation o foudation. From test results, parameters affecting the behavior of model footing were analyzed qualitatively to evaluate their effects on the characteristic of load - settlement, ultimate bearing capacity of model footing and failure mechanism based on the formation of failure surface.

• 한국지반환경공학회 논문집
• /
• 제13권2호
• /
• pp.103-112
• /
• 2012

말뚝에 대한 수평지지력 산정방법은 대부분이 토압론과 지반을 말뚝으로부터 분리하여 고려하기 때문에 지반과 말뚝의 상호작용을 효율적으로 고려하지 못하고 있다. 최근에 말뚝기술이 보다 개선됨에 따라서 수평하중을 받는 말뚝의 실제거동에 대한 규명이 요구되고 있는 실정이다. 이에 본 연구에서는 말뚝과 지반의 상호작용을 고려할 수 있는 변형률 쐐기모델을 이용하여 단일 말뚝과 무리말뚝에 대한 거동 특성을 살펴보고자 한다. 수평하중을 받는 말뚝에 대한 거동을 알아보기 위하여 축소모형실험을 우선적으로 수행하였으며, 실제 규모의 말뚝조건에 대해서는 변형률 쐐기모델을 적용하여 말뚝의 거동특성을 예측하였다. 실내모형실험 결과와 수치해석의 전반적인 거동을 살펴보기 위하여 실험결과 및 해석결과를 이용하여 비교, 분석을 수행하였다.

• 한국지반공학회논문집
• /
• 제23권5호
• /
• pp.63-75
• /
• 2007

Piled raft 기초는 연약지반상에서 과도한 침하와 raft 및 말뚝의 지지력 산정 문제 등으로 적합한 기초는 아닌 것으로 알려져 왔으나 최근 국내외에서 연약지반내 구조물 시공이 증대되면서 연약지반상 piled raft 기초에 대한 관심이 커지고 있다. 이에 본 연구에서는 연약지반에 시공된 piled raft기초의 거동을 분석하였으며 이를 위해 ABAQUS를 이용한 3차원 유한요소 해석을 실시하였다. 해석 시 하중은 등분포하중과 집중하중을 각각 적용하였으며 동일한 조건의 군말뚝과 piled raft 기초 및 다양한 말뚝 배치를 갖는 piled raft 기초를 대상으로 수행하였다. 본 연구결과, 하중형태, 다양한 말뚝 배치 및 근입 깊이에 대한 각각의 침하 및 하중분담특성을 비교, 분석하였으며 이를 통해 연약지반상의 piled raft 기초의 특성을 파악하였다.

• Geomechanics and Engineering
• /
• 제31권2호
• /
• pp.197-208
• /
• 2022

Micropiles consisting of steel bars and grouts are commonly used in underpinning methods to reinforce supports or to suppress the subsidence of existing structures. Recently, applications in the field of geotechnical engineering have expanded. Despite the increasing use of micropiles are used, the PHC or steel pile formula is still applied for the settlement amount of micropiles. Compared with field test results, the amount of micropile subsidence obtained from the existing method may result in a very large error in the displacement of the micropile. Therefore, it is difficult to utilize micropiles effectively. Hence, to solve this problem, this study evaluated the behaviors and support characteristics of micropiles through field compression and tensile tests, and proposed a method for predicting the amounts of their subsidence. To confirm the appropriateness of the proposed method, field test results and the results obtained using the proposed method were compared. It was found that the settlement amounts of the micropiles as predicted through the existing method were significantly overestimated (error ≈ 50-80%) relative to the field test results, whereas the settlement errors of the piles predicted through the proposed method decreased (error ≈6-32%). Thus, it is possible to reduce the previously overestimated amount of settlement, and the modified method of this study allows more efficient design than the conventional method.