• The Journal of the Korea Contents Association
• /
• v.7 no.1
• /
• pp.207-214
• /
• 2007

Symbol mark started with expressing the symbolic form through the long history of human beings, in order to transmit self or group's life and thoughts, and since the Industrial Revolution, symbol mark has beer used for the business activities of enterprise, along with the acquirement of term 'CI'. The symbol mark design of A.E.G, designed by Peter Behrens in 1907 is the onset of symbol mark in the CI concept, and the concept of CI and symbol mark was introduced to our nation in the early of 1970s. Since then, until now, CI has reflected the phase of the times as a key factor of CI, while repeating numerous changes, and recently, it is a state that the expression methods of symbol mark have been varied with the popularization of trend, appealing to emotion in the whole society and culture. Accordingly, this thesis examines the corporate symbol mark through the portfolio of representative CI specializes companies from the introduction period of CI to the present, and analyze the features of the time in order to present the basis of the direction of symbol mark design for the creation of future corporate images.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.277-279
• /
• 2005

Recently, due to the increase of power conversion devices and nonlinear loads with the development of information, communication and control technologies, the instantaneous minute interruption factors such as voltage & current harmonics, surge occurring frequency, instantaneous voltage variation, voltage unbalance, flicker etc. have greatly threatened the power quality, and the deterioration of electric power facilities and the functional error of controllers are increasing. As such an instantaneous minute interruption appears to be small and local, accurate evaluation with measurement is difficult and total analysis system is required through a wide range of power quality effect analysis such as the simultaneous measurement on various power supply phenomena and the analysis on the interrelation with system loads. Most of conventional power quality diagnosis equipments have beer developed and applied, which were able to measure the stability rate of frequency, the stability rate of voltage, the electricity-failure duration etc, However, they were insufficient to analyze the system present situation, understand the cause of the failure occurred by the problem of power quality and analyze out the phenomena. Accordingly, this study will address the development of the system for a wide range of power quality diagnosis over the present level, the system for supporting the determination such as the analysis on risk factors, failure mode and impact, the system for harmonic evaluation based on international standards(IEC 61000 Series) and the total power quality diagnosis network & system with the extension and openness as a local and national-scale broadband power quality diagnosis system.

• The Korean Journal of Applied Statistics
• /
• v.24 no.5
• /
• pp.769-789
• /
• 2011

The life table is a statistical model for life expectancy and reflects mortality experiences exposed to a particular group of people. The following three issues are prerequisite for constructing the life table : a selection of how to estimate the death probability from observed death rates, a graduation method to smooth irregularity of the death probabilities, and an extension method of the death probabilities for oldest-old ages. To construct the life table that is fittest to Korean mortality experiences, we examine five estimation methods such as Chiang's and Greville's for the death probability, three graduation techniques including Beer's and Greville's formulae, and twelve mathematical functions for the extension of death probabilities for oldest-old ages. We also propose a method to resolve the cross-over problem arising from construction the life table.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.58-66
• /
• 2012

Brewers grain is a byproduct of beer brewing and consists primarily of grain husks, pericarp, and fragments of endosperm. Although this material is consumed by animals and used as fertilizer, a large amount of brewers grain is simply discarded. Therefore, new methods for utilizing this fibrous resource should be pursued. In this study, we examined the potential utilization of brewers grain as an additive in the paperboard industry by determining the chemical composition of brewers grain and the physical properties of brewers grain powders after grinding with two types of grinders. We found that brewers grain had a lower holocellulose content and higher lignin content and intermediate ash content when compared to other biomass materials, and did not contain any contaminants that would interfere with the papermaking process. Particles had a higher fiber length, less fiber width, and narrower shape factor distribution when ground by a blender type grinder than by a pin crusher type grinder. The blender type grinder was concluded to make regular brewers grain particles appropriate for papermaking.

• Carbon letters
• /
• v.13 no.2
• /
• pp.109-114
• /
• 2012

A nuclear, biological, chemical (NBC) canister was indigenously developed using active carbon impregnated with ammoniacal salts of copper (II), chromium (VI) and silver (I), and high efficiency particulate aerosol filter media. The NBC canister was evaluated against carbon tetra chloride ($CCl_4$) vapours, which were used as a simulant for persistent chemical warfare agents under dynamic conditions for testing breakthrough times of canisters of gas masks in the National Approval Test of Respirators. The effects of $CCl_4$ concentration, test flow rate, temperature, and relative humidity (RH) on the breakthrough time of the NBC canister against $CCl_4$ vapour were also studied. The impregnated carbon that filled the NBC canister was characterized for surface area and pore volume by $N_2$ adsorption-desorption isotherm at liquid nitrogen temperature. The study clearly indicated that the NBC canister provides adequate protection against $CCl_4$ vapours. The breakthrough time decreased with the increase of the $CCl_4$ concentration and flow rate. The variation in temperature and RH did not significantly affect the breakthrough behaviour of the NBC canister at high vapour concentration of $CCl_4$, whereas the breakthrough time of the NBC canister was reduced by an increase of RH at low $CCl_4$ vapour concentration.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.35 no.2
• /
• pp.156-164
• /
• 1990

A field experiment was conducted to study both the distribution characteristics of photosynthetically active radiation (PAR) in the soybean canopy and their relationships with dry matter production. The soybean cultivars 'Hwanggeumkong' and 'Paldalkong' were sown with the spaces of 60$\times$15cm and 30$\times$15cm at Suwon on May 20 and on June 20 in 1989. The ratio of PAR to the total shortwave radiation was estimated by the empirical equation derived from sunshine hours and direct incoming radiation. The functional relationships between the PAR interception and the leaf area index were expressed as a function of Beer's law. The extinction coefficients(k) in the functions ranged from 0.77 to 0.92. The values of k were greater at higher planting density, but they were affected neither by planting dates nor by varieties. The reflection ratio of PAR($\alpha$) was determined by the exponential function as below; $\alpha$=$\alpha$p-($\alpha$p-$\alpha$o) exp(-kㆍLAI) where $\alpha$p was the reflectance at the maximum LAI and $\alpha$o was that of the bare soil. The ap ranged from 0.025 to 0.035 and $\alpha$o ranged from 0.11 to 0.12, respectively. The reflected PAR ranged from 0.049 to 0.064 and the transmitted PAR ranged from 0.168 to 0.340 until maximum dry weights were observed. The slope from the linear regression of dry matter on absorbed PAR, conversion efficiency, ranged from 1.30 to 2.3g MJ$^{-1}$ during the growing season until maximum dry weight was reached. The total dry matter yield above ground (TDM) increased with the increases in the conversion efficiency. TDM was higher in Hwanggeumkong than Paldalkong and higher in the space of 30$\times$15cm than 60$\times$15cm, Paldalkong showed higher harvest index than Hwanggeumkong. than Hwanggeumkong.

• Carbon letters
• /
• v.6 no.3
• /
• pp.158-165
• /
• 2005

Room temperature kinetics of degradation of nerve agent simulants and sarin, an actual nerve agent at the surface of different carbon based adsorbent materials such as active carbon grade 80 CTC, modified whetlerite containing 2.0 and 4.0 % NaOH, active carbon with 4.0 % NaOH, active carbon with 10.0 % Cu (II) ethylenediamine and active carbon with 10.0 % Cu (II) 1,1,1,5,5,5-hexafluoroacetylacetonate were studied. The used adsorbent materials were characterized for surface area and micropore volume by $N_2$ BET. For degradation studies solution of simulants of nerve agent such as dimethyl methylphosphonate (DMMP), diethyl chlorophosphate (DEClP), diethyl cyanophosphate (DECnP) and nerve agent, i.e., sarin in chloroform were prepared and used for the uniform adsorption on the adsorbent systems using their incipient volume at room temperature. Degradation kinetics was monitored by GC/FID and was found to be following pseudo first order reaction. Kinetics parameters such as rate constant and half life were calculated. Half life of degradation with modified whetlerite (MWh/NaOH) system having 4.0 % NaOH was found to be 1.5, 7.9, 1206 and 20 minutes for DECnP, DEClP, DMMP and sarin respectively. MWh/NaOH system showed maximum degradation of simulants of nerve agents and sarin to their hydrolysis products. The reaction products were characterized using NMR technique. MWh/NaOH adsorbent was also found to be active against sulphur mustard.

• Carbon letters
• /
• v.8 no.4
• /
• pp.274-279
• /
• 2007

In order to understand the breakthrough behaviour of iodine vapours on impregnated carbon systems, an active carbon, 80 CTC grade, $12{\times}30$ BSS particle size and $1104\;m^2/g$ surface area, was impregnated with metal salts such Cu, Cr, Ag, Mo and Zn, and an organic compound Triethylene diamine (TEDA) to prepare different carbon systems such as whetlerite, whetlerite/TEDA, whetlerite/KI/KOH and ASZMT. The prepared adsorbents along with active carbon were characterized for surface area and pore volume by $N_2$ adsorption at liquid nitrogen temperature. These carbon systems were compared for their CT (concentration X time) values at 12.73 to 53.05 cm/sec space velocities and 2 to 5 cm carbon column bed heights. The carbon column of 5.0 cm bed height and 1.0 cm diameter was found to be providing protection against iodine vapours up to 5.5 h at 3.712 mg/L iodine vapour concentration and 12.73 cm/sec space velocity. The study clearly indicated the adsorption capacities of carbon systems to be directly proportional to their surface area values. Dead layer with all the prepared carbon systems was found to be less than 2.0 cm indicating it to be minimum bed height to have protection against $I_2$ vapours. Effect of carbon bed height and flow rate was also studied. The active carbon showed maximum protection at all bed heights and flow rates in comparison to all other impregnated carbon systems, showing that only physical adsorption is responsible for the removal of iodine vapours.

• Carbon letters
• /
• v.8 no.4
• /
• pp.280-284
• /
• 2007

Samples of active carbon of $1150\;m^2/g$ surface area were impregnated with ammoniacal salts of copper, chromium and silver, with and without triethylenediamine. The samples of impregnated carbon were aged at $50^{\circ}C$, with and without 90% RH (relative humidity), for a little more than one year and chemically evaluated periodically. Initially copper (II) and chromium (VI) reduced very fast in the samples in humid atmosphere to the extent of 30% and 60% respectively in four months. These values were found to be unaffected by the presence of triethylenediamine (TEDA) indicating that the chemical did not retard the reduction process of chromium (VI) and copper (II). However, in the absence of humidity the reduction of the impregnants was significantly less (10-12%, w/w) in four months. It was quite evident; therefore, that the moisture was mainly responsible for the reduction of chromium (VI) and copper (II) species in impregnated carbons. The prolonged ageing of the samples with and without triethylenediamme after four months with and without humid atmosphere showed that the extent of reduction of chromium (VI) was very low, i.e. 5-10% and of copper (II) was 2-25%. Silver is not reduced due to carbon, as it remained unchanged in concentration on storage. The impregnated carbon samples (100 g) without triethylenediamine, which were aged at room temperature for 5 years in absence of humidity and unaged when evaluated against cyanogen chloride (CNCl) at a concentration of 4 mg/L and airflow rate of 30 lpm showed a high degree of protection (80- 110 minutes).

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.2777-2782
• /
• 2013

The aim of the present study was to assess criterion validity and external reliability of a questionnaire on risk factors for breast cancer. Materials and Methods. Women with breast cancer diagnosis (the cases) (N=40) and matched individuals without cancer (the controls) (N=40) were asked to fill in a questionnaire twice: on a day of admission to hospital (Q1) and on a day before discharge (Q2), with a time interval of 4-6 days. The questionnaire included questions (N=150) on demographic and socioeconomic factors, diseases in the past, family history of cancer, woman's health, smoking, alcohol use, diet, physical activity, and work environment. Criterion validity of the questionnaire Q2 relative to reference questionnaire Q1 was assessed with the Spearman correlation coefficient (SCC); external reliability of the questionnaire was measured in terms of the intraclass correlation coefficient (ICC). Statistical analysis was performed with SPSS 16. Results. The responses to most of the questions on socioeconomic factors, family history on cancer, female health, lifestyle risk factors (smoking, alcohol use, physical activity) correlated substantially in both the cases and the controls with SCC and ICC>0.7 (p<0.01). Statistically non significant relationships defined only between the responses on amount of beer the cases drank at the ages up to 25 years and 26-35 years as well as time of use of estrogen and estrogens-progestin during menopause by the cases. Moderate and substantial SCC and ICC were determined for different food items. Only the response of the cases on veal consumption did not correlate significantly. Conclusions. The questionnaire on breast cancer risk factors is valid and reliable for most of the questions included.