• Journal of Power System Engineering
• /
• v.15 no.4
• /
• pp.25-30
• /
• 2011

This study is made to provide with a method for correcting the geometric distortion of the digital radiography image by analytical approach based upon the inverse square law and Beer's law. This study is aimed to find out and improve a mathematic model of nonlinear type. Variations in the alignment of the X-ray source, the object, and imaging plate affect digital radiography images. A model which is expressed in parameter values; e.g, angle, position, absorption coefficient, length, width and pixel account of radiography source, is developed so as to match the sample image. For the best correction of the digital image that is the most similar to the model image, a correction technique based upon tangent is developed; then applied to the digital radiography images of steel tubes. As a result, the image correction is confirmed to be made successfully.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.3
• /
• pp.382-388
• /
• 2002

Dissolved silica is one of fatal components at a boiler facility Therefore, a dissolved silica measurement system should be equipped for managing efficiently the boiler facility. Most of silica measurement systems are composed of a sensor module of single-beam type structure, and silica density is measured with a infrared spectrometry using the Lambert-beer method. However, such a system occurs measuring error of large range and inconsistency of a light source, because of measuring a standard sample and a measuring sample alternatively. This paper introduces a method that the sensor module has a split-beam type structure and a tungsten lamp. The proposed system can measure silica density quickly and precisely more than those composing of a single-beam type structure, because of measuring and comparing with two samples at a same time. And examination results are shown to compare efficiencies of the system and existing commercial products, and for an ammonia influence.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.426-429
• /
• 2009

본 연구에서는 바이오에탄올 가격 경쟁력 확보를 위하여 옥수수 및 사탕수수와 같은 식량자원이 아닌 맥주 제조 후 발생되는 폐기물로부터 바이오에탄올을 제조함으로써 기존의 바이오에탄올의 원료로 사용되는 작물의 수급의 불안정 및 곡물가격의 상승에 의한 원료의 가격상승 등에 따른 높은 생산단가에 대한 문제점을 해결할 수 있을 것으로 기대하며, 맥주발효 폐효모액을 이용한 바이오에탄올 제조 특성을 살펴보기 위하여 1일 30톤의 바이오에탄올 제조 공정 해석을 수행하였다.

• Journal of Pharmaceutical Investigation
• /
• v.1 no.1
• /
• pp.47-52
• /
• 1971

Application of the spectrophotometer to the analysis of 17 ${\alpha}-ethinyl$ estradiol and $17{\alpha}-ethinyl-19-nortestosterone$ acetate mixture in oral contraceptive has been accomplished. It is used Beckman Du Spectrophotometer as a apparatus. The petroleum ether extract of ethinyl estradiol is determined at $535\;m{\mu}$ and the chloroform extract of norethindrone acetate is determined at $380\;m{\mu}$ respectively. This analytical method is formed Lambert Beer's law. This method can be used to the analysis of ethinyl estradiol aid norethindrone acetate mixture in commercial dosage form of routine assay.

• Structural Engineering and Mechanics
• /
• v.32 no.1
• /
• pp.71-94
• /
• 2009

In this paper a procedure for Monte Carlo simulation of univariate stationary stochastic processes with the aid of neural networks is presented. Neural networks operate model-free and, thus, circumvent the need of specifying a priori statistical properties of the process, as needed traditionally. This is particularly advantageous when only limited data are available. A neural network can capture the "pattern" of a short observed time series. Afterwards, it can directly generate stochastic process realizations which capture the properties of the underlying data. In the present study a simple feed-forward network with focused time-memory is utilized. The proposed procedure is demonstrated by examples of Monte Carlo simulation, by synthesis of future values of an initially short single process record.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.322-327
• /
• 2020

Abortive infection systems (Abi) are phage resistance systems that can be prophage-encoded. Here, two genes encoding an Abi system were identified on a prophage sequence contained by the chromosome of the Levilactobacillus brevis strain UCCLBBS124. This Abi system is similar to the two-component AbiL system encoded by Lactococcus lactis biovar. diacetylactis LD10-1. The UCCLBBS124 prophage-derived Abi system (designated here as AbiL₁₂₄) was shown to exhibit specific activity against phages infecting L. brevis and L. lactis strains. Expression of the AbiL₁₂₄ system was shown to cause reduction in the efficiency of plaquing and cell lysis delay for phages of both species.

• 전기의세계
• /
• v.28 no.5
• /
• pp.44-48
• /
• 1979

For ordinary systems the receding horizon method has beer proved by the author as a very useful and easy tool to find stable feedback controls. In this paper an open-loop optimal control which minimizes the control energy with a suitable upper limit and terminal control and state constraints is derived and then transformed to the closed-loop control. The stable feedback control law is obtained from the closed-loop control. The stable feedback control law is obtained from the closed-loop control by the receding horizon concept. It is shown by the Lyapunov method that the control law derived from the receding, horizon concept is asymtotically stable under the complete controllability condition. The stable feedback control which is similar to but more general than the receding horizon control is presented in this paper To the author's knowledge the control laws in this paper are easiest to stabilize systems with delay in control.

• Journal of the Korean Chemical Society
• /
• v.9 no.1
• /
• pp.45-48
• /
• 1965

Stability constant, composition of copper (II)-oxamidoxime complex were determined by spectrophotometric method. The ratio of copper (II) and oxamidoxime in the above complex was 1 : 1, and its stability constant was calculated to be $2.4{\times}10^{22}$. The complex solution gave constant absorbancy between the pH range of 4.5 to 6 at 600 $m{\mu}$ in which Beer's law applicable in the concentration range of 0.3 to 2.0 ppm studied in this work. It was noted that some metals such as Fe(III), Ni(II), Co(II), U(VI) interfere copper determination by this method.

• Journal of the Korean Home Economics Association
• /
• v.27 no.4
• /
• pp.51-58
• /
• 1989

The purpose of this study was to investigate the state of eating out and the food preference of college students in Seoul. This survey was carried out through questionaires, and the subjects were 158 male and 159 female students. The results obttained were summarized as follows; 1) Students who took late evening meal at home after eating out were 35.7% and most of the reasons were to custom. 2) During eating out, 30% of students had drinking. Male students had Soju (45.6%), and female had Beer (56.0%). 3) The most cases in date time, eating out cost were 5,000w. They were fond of Western Restaurant and the favorite food were Dongas. 4) Freqency of eating out with family had more than once a month (35%), because of a memorial day and event day, and the most favorite food was Sogalbigui. 5) Male and female students's choice in food at restaurant type were very different.

• The Journal of Information Systems
• /
• v.10 no.2
• /
• pp.129-150
• /
• 2001

In this study, we model a decentralized supply chain system which is managed by four types of centers, sequentially located: Retailer, Wholesaler, Distributor, and Factory Each center contributes to enhancing the performance of the supply chain system individually with its own local inventory information. Through experiments which are performed with a programmed simulation (like the MIT beer game), we investigate how the information lead time improvement in each center affects the whole system. And we show that the impact of the lead time improvement in the downstream, like retailers, affects more to the system than the one in the upstream, like factories, in a cost-effective way. Moreover, by using information lead time for each center, we analyze how much the extent of the improvement affects the whole system, especially for the total cost and the order level.