• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권3호
• /
• pp.223-228
• /
• 2004

Agricultural waste products, beech wood and walnut shells, were hydrolyzed at 40$^{\circ}C$ using mixed crude enzymes produced by Penicillium sp. AHT-1 and Rhizomucor pusillus HHT-1. D-xylose, 4.1 g and 15.1 g was produced from the hydrolysis of 100 g of beech wood and walnut shells, respectively. For xylitol production, Candida tropicalis IFO0618 and the waste product hydrolyzed solutions were used. The effects on xylitol production, of adding glucose as a NADPH source, D-xylose and yeast extract, were examined. Finally, a 50% yield of xylitol was obtained by using the beech wood hydrolyzed solution with the addition of 1% yeast extract and 1% glucose at an initial concentration.

• 펄프종이기술
• /
• 제31권2호
• /
• pp.8-14
• /
• 1999

A screening has been performed to find hyper-ligninolytic fungi, which degtrade beech and pine lignin extensively in order to broaden the understanding of the ligninolytic enzymes elaborated by various white-rot fungi. One hundred and twenty two ligninolytic strains were selected from decayed woods with a selective medium for screening ligninolytic wood-rotting fungi. Two of them, Phanerochaete sordida YK-624 and YK-472, showed much higher ligninolytic activity and selectivity in beech-wood degradation than typical lignin-degrading fungi, phanerochaete chrysosporium and Coriolus versicolor. They also degraded birch dioxane lignin and residual lignin in unbleached kraft pulp(UKP) much more extensively than P. chrysosporium and C. versicolor. During fungal treatment of beech wood-powder, the fungus strain P. sordida YK-624 showed higher activity of extracellular manganese peroxidase (MnP) in the medium than P. chrysosporium. It also showed MnP activity, which would not be lignin peroxidast during treatment of oxygen-bleached kraft pulp(OKP) and under enzyme-inducing conditin.

• Journal of the Korean Wood Science and Technology
• /
• 제31권6호
• /
• pp.31-39
• /
• 2003

The enzymatic isolation of residual lignins obtained from spruce and beech pulps (obtained by sulfite, kraft, ASAM and soda/AQ/MeOH pulping processes) and their characterization was described in previous publications. Here, the residual lignins have been submitted to potassium permanganate oxidation (KMnO₄ degradation), and 9 aromatic carboxylic acids (3 of them are dimeric) were identified after methylation with diazomethane by GC/MS. The analytical challenge during qantification by the internal standard methods was the partly high protein content of the samples, which resulted in elevated anisic acid yields in the degradation mixture of sulfite residual lignins. The results are compared with the KMnO₄ degradation of the corresponding MWLs and discussed in terms of S/G ratios and degrees of condensation. The latter was calculated as a quotient between the aromatic carboxylic acids derived from condensed and non-condensed lignin structures. Typical degradation patterns for the various processes have been observed. Among other parameter, the relative compositions between iso-hemipinic acid (which is for condensation in pos. 5 of the aromatic ring) and meta-hemipinic acid and 3,4,5-trimethoxyphthalic acid (both are for condensation in pos. 6 of the aromatic ring) was found to be process specific. Kraft and soda/AQ/MeOH residual lignins yielded higher amounts of iso-hemipinic acid. In contrast, the relative yields of meta-hemipinic acid and 3,4,5-trimethoxyphthalic acid (the latter in beech lignins) are higher in sulfite and particularly in ASAM residual lignin. In case of beech residual lignins the amount of acids originated from non-condensed syringyl type lignin units was surprisingly high. The condensation degree of residual lignins was shown to be generally higher than that of MWLs. This was especially true for the G units. ASAM residual lignin exhibited very high S/G ratios and degrees of polymerization. Causality between condensation degree and total yield of degradation products was demonstrated.

• 한국가구학회지
• /
• 제11권2호
• /
• pp.79-84
• /
• 2000

It is well-known fact that dimensional stability of wood is greatly enhanced by acetylation of wood. This dimensional stability results from bulking of the reacted acetate within the cell wall, which reduces further swelling when the modified woods come into contact with water or water vapor. The purpose of this research was to determine the water absorption and dimensional stability of the acetylated solid wood in liquid water and in humidity tests. Beech and red oak were acetylated. Moisture and water absorption of acetylated wood were quite dependent on weight percent gain(WPG). Antiswelling efficiency(ASE) was quite dependent on WPG, but was not dependent on species.

• Journal of the Korean Wood Science and Technology
• /
• 제34권6호
• /
• pp.36-43
• /
• 2006

유동형 급속열분해기 (fluidized bed type fast pyrolyzer, 용량 400 g/h)를 이용하여 너도밤나무와 침엽수 혼합재(독일가문비나무/전나무, 50:50) 에서 바이오오일을 생산하였다. 목질바이오매스의 열분해는 약 $470{\pm}5^{\circ}C$에서 1~2초 동안 진행되었다. 목질바이오매스의 열분해 생성물의 조성은 너도밤나무의 경우 바이오오일 60%, 탄 9% 그리고 가스가 31% 정도 생산되었으며, 침엽수 혼합재는 바이오일 49%, 탄 9%, 그리고 42% 가량의 가스가 생성되었다. 두 종류의 목질바이오매스에서 생산된 바이오오일의 수분함량은 약 17~22%이었으며, 밀도는 수종에 관계없이 $1.2kg/{\ell}$이었다. 바이오오일의 원소 조성은 탄소 45%, 산소 47%, 수소 7%, 그리고 질소 1%로 일반적인 목질바이오매스와 큰 차이는 없는 것으로 나타났다. 그러나 화석자원에서 생산되는 오일류와 비교하여 바이오일은 산소함량이 매우 높았고 황은 전혀 포함되어 있지 않았다. 바이오오일의 GC 분석 결과 총 90여종의 방향족(aromatic) 또는 비방향족(non-aromatic) 저분자량 화합물이 검출되었으며 이들의 함량은 바이오오일 전건중량의 31~33%로 분석되었다.

• 생명과학회지
• /
• 제28권7호
• /
• pp.849-856
• /
• 2018

설사는 경제동물의 이유시기 폐사율을 일으키는 가장 높은 요인이다. 크레오소트는 전통 의약품으로 오랜 세월동안 지사제로 사용되어 왔다. 본 연구는 흰 쥐 모델에서 크레오소트 급여가 동물의 성장 효율 및 장내 미생물에 미치는 영향을 구명할 목적으로 수행되었다. 4주령의 수컷 흰쥐 24마리를 임의로 대조구, 항생제 그룹, 크레오소트 0.4% 그룹, 크레오소트 0.8% 그룹으로 배치하였다. 대조구는 기초사료, 항생제 그룹은 apramycin 0.5%, 크레오소트 그룹은 크레오소트 0.4%와 0.8% 수준으로 하여 예비시험 기간 1주일, 본시험 기간 4주일 동안 급여하였다. 일당증체량은 실험구간 차이가 없었으나, 사료 섭취량은 Creo 0.8 그룹에서 유의적으로 증가하였다(p<0.05). 장내 미생물에 대한 문(phylum) 수준 분석 결과 Creo 0.8 그룹에서 Firmicutes가 감소하고 Bacteroidetes가 증가하여 F/B비율을 감소시키는 것으로 나타났다(p<0.05). 과(family) 수준에서는 Lachnospiraceae가 크레오소트 0.8% 수준에서 증가되었으며(p<0.01), 속(genus) 수준에서는 Turicibacter가 감소되었다(p<0.01). 종(species) 수준에서는 Clostridium disporicum이 감소되었다(p<0.01). 이상의 결과는 쥐에 크레오소트 급여는 사료 섭취량을 증가시키고 장내 미생물의 변화에 영향을 미칠 수 있다는 것을 시사한다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.77-84
• /
• 1997

Cone calorimeter measurements can be used for the calculation of effective material properties, which can be used as input parameters in modeling of fire. Main parameter measured in Cone calorimeter is heat release rate. Some other parameters as time to ignition, effective heat of combustion, mass loss rate or total heat released is also measured in Cone calorimeter. Total heat released is important from the point of view of total energy available in material in Fire situation. Cone calorimeter. measurements were done on several wood species (oak, beech, spruce, poplar). Measurements were provided at external irradiances 30, 50 and 65 ㎾/$m_2$ in horizontal orientation. Heat release rate data were evaluated and compared as a function of external irradiance for various species of wood. furthermore the influence of external irradiance on effective heat of combustion and total heat release was also evaluated for the period of flame combustion.

• 한국시뮬레이션학회논문지
• /
• 제33권1호
• /
• pp.1-17
• /
• 2024

숲을 체계적으로 관리하고 경영하기 위해서는 나무생장 변화에 대한 신뢰성 있는 예측이 필요하다. 독일의 아이펠 지역에서는 주요 목재종인 유럽너도밤나무가 식재되어 관리되어 지고 있다. 본 지역의 산림관리자의 실제 산림경영의 경험과 조언을 토대로, 다양한 산림 관리에 따른 단기 및 장기 효과를 예측하고자 지역 특수성을 지니는 시뮬레이션 모델의 접근방법을 개발하고자 하였다. 시뮬레이션 모델은 (1) 묘목 생성, (2) 나무 사멸 조절 (3) 나무 생장의 세 가지 모듈로 구성된다. 산림관리자에 의해 제공된 너도밤나무 숲의 실제 부피 변화를 근사화하기 위해 다양한 변수(나무수, 나무간 거리, 씨앗의 분포, 경쟁)를 반복적으로 수정하여 세 가지 모듈을 결합한 하이브리드 시뮬레이션 모델을 개발할 수 있었다. 본 연구를 통해 유럽너도밤나무 숲의 350년을 모의하여 생장 변화를 예측하였으며, 아이펠 지역의 세 가지 다른 관리 방법 (숲을 보호한 상태에서 목재벌채, 선택적 벌목, 보호림) 시나리오를 적용하였을 때 모의된 결과를 비교하였다. 시뮬레이션 결과를 통해 나무 생장의 변화가 현실적으로 잘 반영되었다는 것을 확인할 수 있었으며, 미래에 장기간 실제 축적된 산림 데이터를 획득하여, 검증과 보정의 과정을 반복한다면 더 높은 정확도의 지역 맞춤형 모델이 개발될 수 있을 것으로 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• 제17권3호
• /
• pp.20-27
• /
• 1989

This experiment was made to find the peripheral variations of annualring widths, the cell dimensions, microfibril angles and bulk densities within each annual-ring of horizontal-growing young tree of beech(Betul a platyphylla var. japonica) and Oak (Quercus variabilis) from the tension to the opposite side. Also a comparision between the features of the obnormal annual ring for horizontal-growing year and normal annual ring for the straight-growing years was made. The dimension of propotion of the element, the microfibril angles and the bulk density decreased or increased continuously toward opposite side which showed minimum or maximum value. The dimension of elements the microfibril angles and the bulk density decreased or increased continuously towards opposite side which showed minimum or maximum value. The dimension of elements. the microfibril angles and the bulk density in the normal annual rings were similar to those in the lateral woods. whereas were significantly more different in the tension wood than in the opposite wood. The features of typical opposite wood in the hardwoods were influenced by the locations within the inclined stems than effects of the decrease in the annual ring width. The oppostie woods in hardwoods did not conform to the tension wood and lateral wood. The abnormal annual ring included the opposite wood, lateral wood similar to normal wood and tension wood having specialized structure even in the same annual ring.

• 한국가구학회지
• /
• 제16권2호
• /
• pp.59-65
• /
• 2005

As physical condition of students improves, there is a need to develop human body-friendly desk and chair for students. In this study, desks and chairs were manufactured with curved veneer lamination under high frequency heating and pressing, using ten wood species such as Japanese red pine, Korean pine, pitch pine, Japanese larch, yellow poplar, black locust, oak, radiata pine, beech, and birch. The performance of these products were evaluated. The results obtained were summarized as follows; With high frequency heating, the turned lamination of veneers with full size sheet ($3{\times}6\;feet$) prepared by rotary lathe peeling was successfully applied for making the members of desk top, leg frames of desk and chair. Bending strengths of desk tops were relatively greater for yellow poplar, black locust and red pine, which were similar to those of beech and birch. Bending strengths of desk legs were classified into greater species group (red pine, yellow poplar, larch) and lower species group (radiata pine, Korean pine, pitch pine). Compressive strengths of chair legs in parallel direction to the lamination were greater in black locust and larch. On the other hand, differences between outer and inner gap at the top and drawer bottom of desk top were rather larger for the laminations of birch and beech, and less for those of yellow poplar and pitch pine, showing greater stability of open drawer space. In results, yellow poplar, larch, pitch pine and red pine showed good appearance and strength properties at the curved veneer lamination. Accordingly, it was believed that these domestic woods were able to substitute for birch which was being imported for the use of veneer-laminates type furniture.