• 전기학회논문지
• /
• 제63권12호
• /
• pp.1742-1746
• /
• 2014

In order to develop a overhead catenary system for the maximum speed of 400 km/h on Honam high-speed line, increasing tension of contact wire, changing dropper distributions, reducing a hard point and etc. should be considered. And it is also essential to develop core components taking account of the increased tension. Therefore we developed a new steady arm for the max. speed of 400 km/h in this study. FEM (Finite Elements Method) analysis was performed to ensure the strength of the arm. An oval shape was applied to the arm, so that 25 % of strength was increased and 9 % of weight was decreased. And a type test according to the code KRSA-3012 was performed to ensure the performance. Fatigue test in KRRI (Korea Railroad Research Institute)'s test-bed was also performed to evaluate its performance. Some section of the Honam High-speed line was constructed with the developed steady arm.

• ALGAE
• /
• 제25권1호
• /
• pp.27-35
• /
• 2010

Marked declines in seagrass meadows are increasingly being reported from coasts around Korea and many regions of the world. The transplantation of seagrasses has been attempted to mitigate and control their degradation from a range of anthropogenic factors. In this study, Zostera marina shoots, which were collected from a donor bed in Koje Bay, were transplanted in Jindong Bay in December 2004. In 2008, a comparative investigation of shoot morphology, growth, and reproduction strategy of Z. marina was carried out between the donor and transplant sites to assess their adaptation success. Shoot height, individual shoot weight, and leaf productivity at the transplant site were significantly greater than those at the donor site. However, below-/aboveground tissue ratio was significantly lower at the transplant site compared to the donor site. Z. marina survival was maintained through vegetative reproduction, while peak season for lateral shoot recruitment was late winter for both donor and transplant site populations. However, vegetative reproduction mainly occurred during late winter and spring at the transplant site, whereas lateral shoots were evident across all seasons except late spring in the donor site. More pronounced seasonal variations were found at the transplant site compared to the donor site. These results indicate that Z. marina populations at the two sites possess distinct phenotypic variations induced by different environmental conditions, and Z. marina transplants have adapted well to the new transplant environment.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.58-65
• /
• 1999

The spinning machine has been developed for a bus and truck wheel disc which is manufactured by spinning process method. This machine has the mechanical structure with bed, 2-column, cross head, 2-vertical slide, 2-horizontal slide with forming roller, clamp slide and main spindle similar to large size vertical lathe. Main spindle attached the mandrel is rotated about 500rpm drived by 280kW power DC motor, and a rotating black material pressed on the mandrel with the clamp slide is spinformed by 2-forming rollers which are attached inner end of the 2-horizontal slides. The 2-vertical and 2-horizontal slides are actuated by the hydraulic cylinder which is controlled by the servo valve individially, and these servo valves are controlled by control signal of the CNC controller which is computed with position signal feedbacked from the encoder sensor. The developed machine can manufacture wheel disc of various section profile without mandrel change because section profile is easily modified using program editing in the CNC controller processor. The wheel disc manufactured by spinning process method has many advantages that the endurance is increased by 2 times and the weight is decreased by 30% compared with a conventional disc.

• 한국환경농학회지
• /
• 제17권2호
• /
• pp.150-155
• /
• 1998

To investigate effects of organic matter application on heavy metal uptake of infant rice seeding, the various amount of organic matter(peat and $Bio-com^{(R)}$)was applied on Cd or Cu treated nursery bed soil. No growth difference was observed up to 20mg/kg of Cu treatment. Above 20mg/kg of Cu treatment, the seeding height and top dry weight were decreased but the Cu uptake by seeding was increased with increasing Cu treatment level. The mat formation was poor above 20mg/kg of Cu treatment, however, the seeding peat application level. All peat treatment resulted better mat formation than control. The seeding height and top dry increasing Cd treatment level. The mat formation was not effected by either Cd treatment level or organic matter sources. The effect of peat and $Bio-com{(R)}$ application on Cd uptake by infant rice seeding was not observed at all Cd treatments level.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.3005-3012
• /
• 2013

The effect of Mn-promotion on high surface area Al-pillared montmorillonite (AlMMT) supported Co nanoparticles prepared by hydrothermal method have been investigated. A series of different weight% Mn-promoted Co nanoparticles were prepared and characterized by XRD, TPR, TGA, BET and SEM techniques. An increase in the surface area of MMT is observed with Al-pillaring. Fischer-Tropsch catalytic activity of the as prepared catalysts was studied in a fixed bed micro reactor at $225^{\circ}C$, $H_2/CO$ = 2 and at 1 atm pressure. The data showed that by the addition of Mn the selectivity of $C_1$ dropped drastically while that of $C_2-C_{12}$ hydrocarbons increased significantly over all the Mn-promoted Co/AlMMT catalysts. The $C_{13}-C_{20}$ hydrocarbons remained almost same for all the catalysts while the selectivity of $C_{21+}$ long chain hydrocarbons decreased considerably with the addition of Mn. The catalyst with 3.5%Mn showed lowest $C_{21+}$ and highest $C_2-C_{12}$ hydrocarbons selectivity due to cracking of long chain hydrocarbons over acidic sites of MMT.

• Ocean Systems Engineering
• /
• 제8권1호
• /
• pp.21-32
• /
• 2018

Due to the escalation in hydrocarbon consumption, the offshore industry is now looking for advanced technology to be employed for deep sea exploration. Riser system is an integral part of floating structure used for such oil and gas extraction from deep water offering a system of drill twines and production tubing to spread the exploration well towards the ocean bed. Thus, the marine risers need to be precisely employed. The incorporation of the strengthening material, fiber reinforced polymer (FRP) for deep and ultra-deep water riser has drawn extensive curiosity in offshore engineering as it might offer potential weight savings and improved durability. The design for FRP strengthening involves the local design for critical loads along with the global analysis under all possible nonlinearities and imposed loadings such as platform motion, gravity, buoyancy, wave force, hydrostatic pressure, current etc. for computing and evaluating critical situations. Finite element package, ABAQUS/AQUA is the competent tool to analyze the static and dynamic responses under the offshore hydrodynamic loads. The necessities in design and operating conditions are studied. The study includes describing the methodology, procedure of analysis and the local design of composite riser. The responses and fatigue damage characteristics of the risers are explored for the effects of FRP strengthening. A detail assessment on the technical expansion of strengthening riser has been outlined comprising the inquiry on its behavior. The enquiry exemplifies the strengthening of riser as very potential idea and suitable in marine structures to explore oil and gas in deep sea.

• 한국조경학회지
• /
• 제16권1호
• /
• pp.37-42
• /
• 1988

초경수림의 재배에 있어 연탄재와 도시하수처리에서 발생한 오니를 혼합하여 배양토를 만들어 상토로 사용하고 주목, 회양목, 쥐똥나무, 라일락 등 4개 수종의 생육을 비교시험한 결과 다음과 같은 결론을 얻었다. 1. 4개 수종 공히 초기생장은 무처리구와 처리구에서 약간의 생육차이를 보였다. 2. 식재후 2개월이 지난 후 부터는 현격한 생장차이를 나타내기 시작하였다. 3. 가장 높은 생장을 나타낸 것은 라일락이며 쥐똥나무, 회양목, 주목의 순이었다. 4. 특히 주목은 그 생장량 차이가 타수종에 비하여 현격하게 적게 나타나고 있다. 5. 이후 도시환경문제를 심각하게 만들고 있는 연탄재와 하수오니는 조경용 수목의 재배나 식재지객토로 활용한다면 매우 높은 효과를 얻을 것으로 기대된다.

• 한국의류학회지
• /
• 제21권3호
• /
• pp.516-523
• /
• 1997

The actual conditions of bedclimate are investigated depending on the regions and housing styles used on ondol in spring. Sixty healthy men and women (30 of them live in apartment and 30 of them live in detached house, 20 of them live in Wonju, 20 of them live in Cheongiu and 20 of them live in Pusan). The results are as follows: 1) The differences of bedclothes thickness between spring and autumn were not significant. weight of sleep-wear in spring was less than those in the autumn. 2) In the spring, the temperature and humidity of bedroom, floor, on/under the mattress, were lower and the temperature inside the sleep-wear was higher than those in the autumn. 3) The differences of the temperature and humidity of bedroom, the bed climate, and the clothing microclimate were significant by the regions and housing styles in spring. The temperature of bedroom and inside sleep-wear, the humidity of bedroom and inside sleep- wear in the apartment were higher than those in the detached house. 4) The differences of comfort sensation on the bedroom conditions was significant by the regions, and the differences of thermal sensation was significant by the housing styles. Most subjects perceived warm and dry but comfortable.

• 한국작물학회지
• /
• 제42권2호
• /
• pp.141-145
• /
• 1997

원적외선 복사 물질인 세라믹 분말을 벼 기계이앙상토에 혼합하였을 때 벼 유묘의 생장에 미치는 효과를 분석하고, 세라믹 분말의 적정혼합비를 구명하기 위하여 실험을 실시하였다. 공시 품종은 화성벼로 하였고, 세라믹 분말은 $Al_2$O$_3$계를 사용하였다. 시험한 결과를 요약하면 다음과 같다. 1. 시험에 사용한 세라믹 분말의 복사파장 범위는 6~11$mu extrm{m}$이었다. 2. 세라믹 분말의 혼합처리는 무처리에 비하여 초장이 뚜렷하게 증가하였다. 3. 세라믹 분말의 혼합처리는 모의 건물중을 증가시키는 것으로 나타났다. 4. 벼 유묘의 초장을 증가시키는 세라믹 분말의 추정 적정혼합비는 9.6%(240g)인 것으로 나타났다.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.593-596
• /
• 2008

The scour phenomenon involves the erosive potential of flowing water and the relative ability of the soil to resist erosion. The scour phenomenon in cohesive soils is much different from that in non-cohesive soils. Granular soils resist erosion by their buoyant weight and the friction between the particles. The soil particles are dislodged individually from the bed under the action of the eroding fluid. Scour in cohesive soils is much slower and more dependent on soil properties than that in non-cohesive soils. Therefore the analysis models for estimating erosion characteristics of cohesive soils should consider not only flowing water but also the relative ability of the soil to resist erosion. In this study, erosion characteristics for the clay-silt mixed soil will be analyzed as a fundamental study for development of bridge scour analysis and design system considering scour resistance capacity of a soil. For this analysis, the relationship between scour characteristics and soil properties was evaluated through scour rate test with Kaolinite samples remolded using various loading and contents of silt.