• 공업화학
• /
• 제19권3호
• /
• pp.295-298
• /
• 2008

ASTM D5757-95에 따른 입자 마모 측정기를 이용하여 접선 방향의 기체 주입에 따른 입자 마모 특성을 고찰하였다. 접선 방향의 기체 주입에 따른 영향을 고찰하기 위하여 모래의 입도 분포 변화, 비산 회재의 양 등을 측정하여 비교하였다. 입자 마모에 따라서 발생하는 미세 입자들은 기체 유속이 증가함에 따라서 증가하였다. 수직 방향의 기체 주입에 비해 접선 방향으로 기체를 주입함에 따라서 입자 마모량이 변하였으며 노즐의 각도가 감소함에 따라서 비산량이 줄어들었다. 또한 전체 유량이 동일한 경우, 사용되는 노즐이 증가할수록 입도변화가 커짐도 알 수 있었다.

• 한국산림과학회지
• /
• 제77권2호
• /
• pp.193-198
• /
• 1988

본(本) 연구(研究)는 광도(光度)와 식재밀도(植栽密度)를 달리하여 이식(移植)한 잣나무 묘목(苗木)의 시기별(時期別) 생장(生長)에 대(對)한 침엽(針葉)의 중량생장(重量生長)을 조사(調査) 분석(分析)한 것으로 기(其) 결과(結果)를 요약(要約)하면 다음과 같다. 1) 묘목(苗木)의 침엽(針葉) 생장(生長)에 있어 생중량(生重量) 급(及) 건중량(乾重量) 생장(生長)은 상대광도(相對光度)가 높아 질 수록, 그리고 식재밀도(植栽密度)가 낮아 질 수록 점차(漸次) 증가(增加) 하였으며 시기별(時期別) 생장(生長)에 있어서는 5월(月)~6월(月)의 시기(時期)가 가장 높게 나타났다. 2) 침엽(針葉)의 생중량(生重量)과 건중량(乾重量) 생장(生長)에 상대광도(相對光度) 급(及) 식재밀도(植栽密度) 그리고 시기별(時期別) 생장(生長)이 미치는 영향(影響)은 각각(各各) 기여율(寄與率) 1.9%와 5.1%, 3.6%와 3.2%, 그리고 83.7%와 75.6%로 각기(各己) 작용(作用) 되었다. 3) 침엽(針葉)의 생중량(生重量)과 건중량(乾重量) 생장(生長)에 있어 피음(被陰), 식재밀도(植栽密度) 그리고 생장시기(生長時期) 등(等)의 3개(個) 요인(要因)은 상호간(相互間) 모두가 유의적(有意的) 이었다.

• 한국작물학회지
• /
• 제58권2호
• /
• pp.190-195
• /
• 2013

In this study, the response of 22 soybean cultivar sprouts to flooding stress was investigated. After sprouts were subjected to flooding stress for 10 days at the V4-V5 growth stages, their dry weights were compared. All plants were kept in a greenhouse under natural light conditions, an average daytime temperature of $35.6{\pm}5.3^{\circ}C$ and an average nighttime temperature of $18.2{\pm}1.7^{\circ}C$. Soybeans were grown in a concrete bed filled with silt loam soil. Subjecting plants to flooding stress resulted in a large reduction in plant dry weight, plant height, number of nodes, and number of leaves. Cultivars differed significantly in their responses to flooding stress, as indicated by these characteristics (p<0.05). Soybean cultivars were classified into three groups based on their degree of flood tolerance: strong, moderate, and weak. Hannamkong, Namhaekong, Sobaegnamulkong, and Sorogkong had strong tolerance for flood conditions. Tawonkong, Pureunkong, Eunhakong, Myeongjunamulkong, Doremikong, Saebyeolkong, Paldokong, Sowonkong, Pungsannamulkong, Dagikong, Dachaekong, and Anpyeongkong had weak tolerance for flood conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.323-326
• /
• 2004

In this study, the inspection path which is considered to free collision is generated by offset surface. When the inspection is executed, the consideration of machine dynamic error increases a precision. Dynamic error is measured on CNC machine bed changing of weight work price. Offset surface is safety space about collision. Because the danger of probe-collision is excluded in Offset surface, it is possible to rapid feed of probe and reduced inspection time. The Program which is possible to simulate using CAIP and is confirmed through actual experiment.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.67-73
• /
• 1999

This paper presents resizing design optimization method by utilizing genetic algorithm(GA), which consists of three basic operators : reproduction, crossover and mutation. The fitness and penalty function for resizing optimization problem are defined, and the flowchart of the developed computer program along with the descriptions of each modules is presented. Also, modelling for flexible-body dynamic analysis is presented. The model is composed of bodies, joints, and force elements such as translational spring-damper-actuator. The design objects si to determine the wall thickness for minimum weight under dynamic displacement constraint.

• Journal of Ginseng Research
• /
• 제5권2호
• /
• pp.85-91
• /
• 1981

Ginseng seeds were gathered from 3,4,5 and 6 years of age and were classified into four qroups (below 4mm, 4∼5mm, 5∼6mm and above 6mm in across sieve). They were sown in seedling bed and some characters were investigated in each qroup of seed size. 1. The distribution of seed size of below 4mm, 4-5mm, 5-6mm and 6mm were 23.7%, 60.8%, 12.4% and 4.5%, respectively. 2. The ratio of seed coat dehiscence was not affected by seed size but emergence ratio and emerging vigor were superior in large seed. 3. The large seed showed superiority in stem length, stem diameter, leat and also in root length, root diameter and root weight. but diseased root was not affected by seed size. The effect of age(seed harvest) was not significant on all those characters.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.121-128
• /
• 2001

This is a case study of stability analysis and reinforcement design for the tunnel where the collapse of the entrance slops occured along the fault zone developed in the bed rock. According to the site investigation, the main factor of sliding is the influence of fault gouge and heavy rainfall. Considering the in-situ condition, the versatile reinforcement methods is needed, and so the close investigation on the site area was accompanied with the stability analysis of tunnel and slops. The FRP(Fiberglass reinforced plastic) grouting method improved the defect of Steel Umbrella Arch Method, such as oxidation, low work efficiency, the material's heavy weight, is adapted as the reinforcement methods.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제10권3호
• /
• pp.170-177
• /
• 2010

Poker is a game of imperfect information where competing players must deal with multiple risk factors stemming from unknown information while making the best decision to win, and this makes it an interesting test-bed for artificial intelligence research. This paper introduces a new learning AI algorithm with embedded opponent modeling that can be used for these types of situations and we use this AI and apply it to a poker program. The new AI will be based on several graphs with each of its nodes representing inputs, and the algorithm will learn the optimal decision to make by updating the weight of the edges connecting these nodes and returning a probability for each action the graphs represent.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 연료전지심포지움 2003논문집
• /
• pp.89-95
• /
• 2003

Fuel processing is an enabling technology for faster commercialization under lack of hydrogen infrastructures. It has been reported that the development of novel catalysts that are active and selective for hydrocarbon reforming reactions. It has been realized, however, that with pellet or conventional honeycomb catalysts, the reforming process is mass transport limited. This paper reports the development of catalyst structures with microchannels that are able to reduce the diffusion resistance and thereby achieve the same production rate within a smaller reactor bed. These microchannel reforming catalysts were prepared and tested with natural gas and gasoline-type fuels in a microreactor (1-cm dia.) at space velocities of up to 250,000 per hour. These catalysts have also been used in engineering-scale reactors (10 kWe, 7-cm dia.) with similar product qualities. Compared to pellet catalysts. the microchannel catalysts enable a nearly 5-fold reduction in catalyst weight and volume.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2548-2553
• /
• 2008

Prediction of the rotor blade performance is important for determining design factors such as weight and size in development of a small-scale helicopter. Generally, prediction of helicopter performance means the estimation of the power required for a given flight condition. However, due to lack of test data and analyzed results for small-scale rotor blade operated at low Reynolds numbers ($Re{\approx}10^5$), this is not an easy task. As an initial research, this work performs a modeling of a single rotor configuration with FLIGHTLAB and a experimental research with rotor test bed. In this process, we performed small-scale isolated single rotor by experimental and numerical method and achieved good agreement of the hover performance on the test data and simulation results.