• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.2
• /
• pp.72-77
• /
• 2013

Purpose: Whole-body PET using radiopharmaceutical is one of the imaging study methods for physiological changes of body. High specificity of the PET-CT examination is used to detect an early stages of cancer and metastatic cancer by imaging a physiological changes. During the imaging process, PET image has been characterized by a relatively low image quality due to its low sensitivity and the acquisition of random and scatter coincidences as well as patients figure. Therefore, the image quality as the changes of the acquisition times of patient weight was evaluated in this study. Materials and Methods: Thirty patients who presented to our hospital were enrolled. They were divided to normal, overweight, and obese group using BMI index, respectively. The patients with a liver disease and diabetes were excluded. $^{18}F-FDG$ was administered to the patients as 5.2 MBq per kg. After an hour from an injection, image acquisition was obtained as List mode in a part of liver in 1 bed. SNR (signal-to-noise ratio) of each groups acquisition times were confirmed from the calculated radiation counts and random fractions. The statistical significance of three groups was confirmed through one-way ANOVA test. On the basis of the counts of 2 minutes on normal group, the SNR of overweight group and obese group were compared. Results: The SNR were increased with loger aquisition time in 3 groups. In the condition of same acquisition time, the SNR had a statistical significance (P<0.05). The SNR were decreased to the normal, overweight, and obese, respectively. Liver activity had no significance difference on each group and RF had the significance differences (P<0.05). On the basis of the counts of 2 minutes on normal group, there were no statistical significance in a three minute acquisitions of overweight group and two minute acquisitions of obese group (P=0.150). Conclusion: In this study, the administrated amount of radiation dose did not adjust as the change of the patients weight. Increasing the acquisition time when the administration of the same amount of dose was able to get a good result of SNR. When the Based 2 minute on normal group, if overweight and obese case the increased acquisition time of 3 minute was able to obtain a similar SNR. On the basis of the normal group, the acquisition times of overweight and obese group were increased to 3 minutes per bed and the SNR were similar to the normal group.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.165-169
• /
• 2001

Seed coat of sword bean (Canavalia gladiata) is very thick and hard, it is difficult to absorb water during germination and it requires much time that cotyledon come out from seed coat since seminal root appearanced. Therefore this experiment was carried out to increase the germination rate by easing water absorption through mechanical scarification on seed coat. Non-scarification seed did not germinated at 7 days after treatment but scarification seed showed germination rate of 98%. Therefore mechanical scarification of seed coat was increased germination rate. Non-scarification seed absorbed less than 10% water of dry weight at 8 hours after treatment but scarification seed absorbed about 90% water at 7 hours after treatment and more than 150% water at 8 hours and swelled about 1.4-1.5 times in length and width of seed. Germination rate of scarification seed was high under high temperature and it was 96% and 93% at $25^{\circ}C$ and 3$0^{\circ}C$, respectively. The rate of cotyledon emergence on clay loam soil was the highest among bed soils. Soaked seed after mechanical scarification in distilled water was germinated faster than non-soaked seed on early in bed soil. The rate of cotyledon emergence was more than 92% at 9 days after sowing but non-scarification and soaked seed was germinated late and showed very low germination rate as 67%.

• Journal of Preventive Medicine and Public Health
• /
• v.38 no.2
• /
• pp.141-146
• /
• 2005

Objectives: Particulate contaminants, such as total and respirable dusts, can harm the health of farm workers via several routes. The principal aims of this field study were to determine the concentrations and emissions of particulate contaminants: total and respirable dusts, in the different types of swine houses used in Korea, and allow objective comparison between Korea and the other countries in terms of swine housing types. Methods: The swine houses investigated in this research were selected with respect to three criteria: the manure removal system, ventilation mode and growth stage of pigs. Measurements of total and respirable dust concentrations and emissions in the swine houses were carried out on 5 housing types at 15 different farm sites per housing type. The swine houses investigated were randomly selected from farms situated within the central districts in Korea: province of Kyung-gi, Chung-buk and Chung-nam. Results: The total and respirable dust concentrations in the swine houses averaged $1.88\;and\;0.64mg/m^3$, ranging from $0.53\;to\;4.37mg/m^3$ and from $0.18\;to\;1.68mg/m^3$, respectively. The highest concentrations of total and respirable dusts were found in the swine houses with deep-litter bed systems: $2.94mg/m^3\;and\;1.14 mg/m^3$, while the lowest concentrations were found in the naturally ventilated buildings with slats: $0.83mg/m^3\;and\;0.24mg/m^3$, respectively (p<0.05). All the swine houses investigated did not exceed the threshold limit values (TLVs) for total ($10mg/m^3$) and respirable ($2.5mg/m^3$) dusts. The mean emissions of total and respirable dusts, per pig (75 kg in terms of live weight) and area ($m^2$), from the swine houses were 97.33 and 9.55 mg/h/pig and $37.14\;and\;12.83mg/h/m^2$, respectively. The swine houses with deep-litter bed systems showed the highest emissions of total and respirable dusts (p<0.05). However, the emissions of total and respirable dusts from the other swine houses were not significantly different (p>0.05). Conclusion: The concentrations and emissions of total and respirable dusts were relatively higher in the swine houses managed with deep-litter bed systems and ventilated naturally of the different swine housing types tested. In further research, more farms than the number used in this research should be investigated, which will present objective and accurate data on the concentrations and emissions of total and respirable dusts in Korean swine houses. In addition, personal sampling should be performed to objectively assess the exposure level of farm workers to particulate contaminants.

• Journal of the Korean Chemical Society
• /
• v.24 no.4
• /
• pp.329-336
• /
• 1980

A domestic phosphogypsum was calcined in a batch type fluidized bed reactor at various reaction temperatures ranging 90∼180$^{\circ}$ without and with an alkaline additive amounting up to 5% of gypsum, and physical properties of the resultant products were compared following their characterization by X-ray diffraction pattern and DTA. It has been found that dehydration reactions were uniformly carried out in the fluidized bed reactor and only hemihydrate was obtained at 90$^{\circ}$ whereas at higher temperatures dehydration reaction progressed further. When gypsum was charged to the reactor preheated at over 140$^{\circ}$, a considerable degree of dehydration occurred before the reactant reached the initially set reactor temperature and in particular, at over 160$^{\circ}$ most of dehydration reaction was performed prior to the present reactor temperature. However, it has been found that gypsum mostly transforms into hemihydrate around the reactant temperature of 140$^{\circ}$ while transformation into anhydrite mostly occurs around $160^{\circ}C.$ When calcium hydroxide was added to gypsum in the reactor, the optimum physical properties of the calcined product were obtained at the weight ratio of $Ca(OH_2)/P_2O_5$ = 3.2.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.61-61
• /
• 2020

This experiment was carried out using artificial bed soil and LED in the plastic film house(irradiation time: 07:00-17:00/day). Seedlings(n=63 per 3.3 m²) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity(40-160 µmol/m²/s). Average air temperature from April to September according to the light intensity test was 20.4℃-20.9℃. Average artificial bed soil temperature was 20.1℃-21.7℃. The test area where fluorescent lamp was irradiated tended to be somewhat lower than the LED irradiation area. The chemical properties of the test soil was as follows. pH levels was 6.6-6.7, EC levels 0.9-1.3 dS/m and OM levels 30.6-32.0%. The available P₂O₅ contents was 73.3-302.3 mg/kg. Exchangeable cations K and Ca contents were higher than the allowable ranges and mg content was high in the fluorescent lamp treatment. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PPFD(Photosynthetic Photon Flux Density) value, illuminance and solar irradiation. Fluorescent lamp treatment had high illuminance value, but PPFD and solar irradiation were lower than LED intensity 40 µmol/m²/s treatment. The photosynthetic rate increased(2.0-3.8 µmolCO²/m²/s) as the amount of light intensity increased, peaking at 120 µmol/m²/s, and then decreasing. The SPAD (chlorophyll content) value decreased as the amount of light intensity increased, and was the highest at 36.1 in fluorescent lamp treatment. Ginseng germination started on April 5 and took 14-17 days to germinate. The overall germination rate was 68.8-73.6%. The growth of aerial parts(plant height etc.) were generally excellent in the treatment of light intensity of 120-160 µmol/m²/s. The plant height was 41.9 cm, stem length was 24.1 cm, leaf length was 9.8 cm and stem diameter was 5.6 mm. The growth of underground part (root length etc.) was the best in the treatment with 120 µmol/m²/s of light intensity. Due to the root length was long(24.8 cm) and diameter of taproot was thick(18.7 mm), the fresh root weight was the heaviest at 24.8 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping-off caused by Rhizoctonia solani occurred 0.6-1.5% and incidence ratio of rusty root ginseng was 30.8-62.3%. It is believed that the reason for the high incidence of rusty root ginseng is that the amount of field moisture capacity of artificial bed soil is larger than the soil. Leaf discoloration rate was 13.7-32.3%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.3
• /
• pp.292-298
• /
• 1997

To compare the growth pattern of ginseng plant under between conventional shading(light transmittance rate 3％) and polyethylene net shading(light transmittance rate 10％), the distribution of leaf area, specific leaf weight (S. L. W), leaf and stem dry weight and changes in light intensity were investigated in 2, 4 and 6 year old ginseng plant populations. Light transmittance rate(L.T.R.) was 3％ at front line, 2％ at middle line and 1.5％ at rear line under conventional shading but it was 12, 10 and 8％ under polyethylene net(P.E) shading, respectively. In 2 year old population, there was a little difference in the growth characteristics investigated between conventional and P.E. shading. In 4 year old field, the leaf area, stem and leaf dry weight decreased in large amount in the order of middle, and rear line on ridge under conventional shading, but with a little difference under P.E. shading. And these trends enlarged in 6 year old field with appearance of a large part of shoot over furrow from ridge planted ginseng. Root yield index was much lowered at the rear 3rd, 4th and 5th line of the conventional shading bed, but there was no yield difference among lines except 5th lines under the P.E. shading with higher yield by 28％ than conventional shading.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.248-255
• /
• 1999

Catalytic cracking of pyrolysed waste lubricating oil over solid acid catalysts (HY zeolite, ${\beta}$-zeolite, HZSM-5) has been carried out in a micro-fixed bed system. The feed oil for catalytic activity tests has been prepared by thermal cracking of waste lubricating oil under the reaction conditions of 480$^{\circ}C$, 60 min. Optimum reaction conditions for the maximum light oil yields($\_$21/) were WHSV(weight hourly space velocity)=1 at 375$^{\circ}C$. The amounts of total and strong acid sites appeared to be the largest in ${\beta}$-zeolite as determined by NH$_3$, TPD. It is seen that the catalytic activity order, in terms of the light fuel oil ($\_$21/) production, were HY zeolite)${\beta}$-zeolite>HZSM-5. Also, coke formation followed the same order. The highest activity in HY zeolite may be attributed from the fact that it has supercages facilitating the easy diffusion of larger molecules and also the effectiveness of the acid sites for cracking within the pore. This fact could be confirmed by the coke formation characteristics.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.268-277
• /
• 2012

The thermal decomposition characteristic of waste PVC wires has been studied by using TGA and fixed-bed reactor. The experimental conditions of decomposition temperatures, air flow rates and weight ratio of CaO/PVC were considered in this work. To verify the effectiveness of CaO addition to remove HCl and toxic gases generated from thermal decomposition of PVC wire, the gaseous products obtained from the thermal decomposition of PVC were analyzed by GC/MS(Gas Chromatograph and Mass Spectrometry). To investigate the effect of CaO in thermal decomposition of PVC, liquid products were also analyzed by GC/MS. And the effect of decomposition temperature, air flow rate and CaO/ PVC weight ratio on the yield of liquid, gas and residue fraction have been also studied. From this work, it was found that the removal amount of HCl generated from thermal decomposition of PVC increased with increase of CaO addition.

• Journal of Aquaculture
• /
• v.11 no.3
• /
• pp.401-419
• /
• 1998

The structure of benthic algal flora and feeding behavior of sea urchins (Anthocidaris crassispina and Hemicentrotus pulcherrimus), were investigated from the eight different locations along the coast of Cheju Island, Korea. Biomass distribution and dominance of the algal communities were studied in relation to the gut contents and population parameters of the sea urchins. As a result, although the largest algal biomass and biological characteristics of sea urchins, such as test diameter, test hight, body weight, gonad weight, etc. This inhdicated that sea urchins would not be dependednt sorely on the abundance of algal foods, and they might feed on other food items. In order to know such a trend with regard to food selectivity, the diets consumed by sea urchins were analyzed, and it was found that they were composed of benthic and drifted algae, various animal components (sponges, bryozoans, crustaceans, and various unidentified capsulated eggs, etc.) and biets turned out to be smaller than might be expected, and it is postulated that sea urchins were not likely to be the major grazing animals for the formation of algal bed and also canopy deterioration, so-called "white incrustation."

• Journal of Ecology and Environment
• /
• v.38 no.2
• /
• pp.133-143
• /
• 2015

Freshwater macrophytes improve the structural heterogeneity of microhabitats in water, often providing an important habitat for zooplankton. Some studies have focused on the overall influence of macrophytes on zooplankton, but the effects of macrophyte in relation to different habitat characteristics of zooplankton (e.g., epiphytic and pelagic) have not been intensively studied. We hypothesized that different habitat structures (i.e., macrophyte habitat) would strongly affect zooplankton distribution. We investigated zooplankton density and diversity, macrophyte characteristics (dry weight and species number), and environmental parameters in 40 shallow wetlands in South Korea. Patterns in the data were analyzed using a self-organizing map (SOM), which extracts information through competitive and adaptive properties. A total of 20 variables (11 environmental parameters and 9 zooplankton groups) were patterned onto the SOM. Based on a U-matrix, 3 clusters were identified from the model. Zooplankton assemblages were positively related to macrophyte characteristics (i.e., dry weight and species number). In particular, epiphytic species (i.e., epiphytic rotifers and cladocerans) exhibited a clear relationship with macrophyte characteristics, while large biomass and greater numbers of macrophyte species supported high zooplankton assemblages. Consequently, habitat heterogeneity in the macrophyte bed was recognized as an important factor to determine zooplankton distribution, particularly in epiphytic species. The results indicate that macrophytes are critical for heterogeneity in lentic freshwater ecosystems, and the inclusion of diverse plant species in wetland construction or restoration schemes is expected to generate ecologically healthy food webs.