• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.112-116
• /
• 2019

This study was carried out by structural analysis using finite element method for designing high rigidity structure of multi - functional automatic lathe bed. As a result of comparison, it was confirmed that the weight was designed to be higher than the maximum deformation amount. The shape and dimensions of the main pillars and walls of the bed were changed to derive the most suitable design for the multifunction automatic lathe bed. A model of structural design was derived with the goal of minimizing the maximum deformation amount of $20{\mu}m$ or less and the weight of the bed. As a result of applying the derived design improvement proposal to the multifunctional automatic lathe bed, 57.4% weight reduction and maximum principal stress decreased by 45.0% than the initial design model. It is expected that the optimum design that meets these design conditions will reduce the weight of the structure as well as improve the safety of the structure and reduce the machining error in the operation of the machine tool.

• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.2
• /
• pp.220-228
• /
• 2008

Toluene adsorption characteristics in the adsorption bed packed with activated carbon fiber (ACF) were studied. Experimental apparatus is composed of VOC generation equipment, adsorption bed, and analytical instrument. Breakthrough characteristics were investigated with length of the adsorption bed which consisted of 3 or 5 sheets of the ACF and flow rate when toluene concentration are 400 ppm and 800 ppm respectively. When mass transfer zone (MTZ) comes out of the adsorption bed, toluene concentration is increased sharply and reached plateau region by saturation. Experimental results are compared with semi-empirical gas adsorption model proposed by Yoon and Nelson. In order to investigate the movement of the MTZ with adsorption time in the adsorption bed packed with ACFs, weight increment of each ACF was measured with the location of ACF at each run. When the weight increment of ACF by toluene adsorption which located at the exit of the bed reaches about 20%, toluene started to be detected.

• Journal of environmental and Sanitary engineering
• /
• v.12 no.1
• /
• pp.69-75
• /
• 1997

Biological drinking water treatment is widely used in Europe for the removal of ammonia nitrogen and organics. During the last 16 years, the deterioration of the quality of surface waters used to produce drinking water has resulted in the widespread use of ozone-biological treatment in Korea. This study were conducted to determine the effect of media weight and preozonation on the biodegradability enhancement in biological fluidized bed(BFB) using Han river water. When the carbon weight was increased, $NH_{3}-N$ and DOC removal increased, but turbidity and SS removal decreased. To remove turbidity and SS, the bed depth in 40% expansion rate/total bed depth was very important. Preozonation of raw water was not effective in $NH_{3}-N$, but increased in biodegradable organic fraction about 10-30% with 0.425-0.85 mg $O_{3}/mg$ DOC.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.1003-1004
• /
• 2010

• Journal of the Korean Society of Tobacco Science
• /
• v.4 no.1
• /
• pp.43-49
• /
• 1982

This experiment was carried out to study the influence of temperature on the growth rate and nutrient uptake of tobacco seedlings grown on neutralized charcoal bed during temporary transplanting. The highest growth rate was obtained at tile temperature of 26-22-$l8^{\circ}C$, probably due to fast establishment of roots in the soil. Seedling growth was better in neutralized charcoal bed than in chaffy charcoal bed at each temperature. Days required for fresh weight to reach 20g/10p1ants were shortened by 9~12days as the temperature increased from 18-14-$l0^{\circ}C$ to 26-22-$l8^{\circ}C$. Compared with chaffy charcoal bed, days required for fresh weight to reach 20g/10 plants with neutralized charcoal bed were shortened by about 5 days, 4 days, and 2days at 18-14-$l0^{\circ}C$, 22-18-$l4^{\circ}C$, and 26-22-$l8^{\circ}C$, respectively. Three macronutrient (N, $P_2O_5,\;K_2O$) contents in seedlings increased with increase of temperature. At each temperature, N and $K_2O$ contents in seedlings of neutralized charcoal bed was higher than those of chaffy charcoal bed, whereas that of $P_2O_5$ was low conversely. Nitrate nitrogen from nitric acid that was used to neutralize chaffy charcoal was maintained to tile end of seedling period, providing the source of nitrate nitrogen for the better seedlings.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.4
• /
• pp.484-492
• /
• 2015

The purpose of this study is to compare the ichthyofauna between the eelgrass bed waters located in the open sea and the nearby sea free of eelgrass, and this study collected a total of 26 species. Comparing the fish collected on the eelgrass bed (St.2) of Geomun-do coast with the fish collected on the coastal waters (St.1) void of the nearby eelgrass bed, the fish collected from the eelgrass bed included 19 species, 413 individual with 16,110.6g in weight while the fish collected from the coastal waters void of the eelgrass bed included 19 species, 290 individuals with 12,961.5g in weight. Accordingly, it was found that the population size and biomass of the fish collected from the eelgrass bed were higher than the coastal waters void of the eelgrass. This study could identify that diversity, richness, evenness index except dominance were also much higher even in the result of cluster analysis.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.105-106
• /
• 2015

As the Long-life certification system is recently introduced in the Housing Law in Korea, it is expected that an application of the lightweight wall panel will be increased in apartment construction as the main wall system. However, the performance criteria for lightweight wall is in the early phase of its action. Therefore, it is necessary to establish the performance criteria properly by investigating performance requirement in the user's perspective. The purpose of this study is to identify of the weight of the required performance items for the lightweight wall in apartment house. To analyze the priority in the performance, an interview survey is performed; after monitering the test-bed of the lightweight walls, user and experts evaluate the performance requirements. The weight of the performance requirement is developed by AHP method.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.746-752
• /
• 2010

Rib structure has been used to bed and column of machine tool to heighten weight stiffness ratio, cost performance and weight saving. In this paper the bed rib structure was estimated with thermal characteristics. Using superposition principle, machine tool designer can describe every complicated heat generation in the machine tool thermal source. As thermal characteristics, thermal deformation of guide rail and column and Maximum-minimum temperature variation were selected. The size, configuration and direction against the thermal loading surface operated to the thermal characteristics. The DB chart was made following rib structure estimating thermal characteristics. With superposition principle and DB chart, machine tool designer can prognosticate the thermal characteristics without FEM analysis to every bed rib structure.

• Journal of Environmental Science International
• /
• v.18 no.6
• /
• pp.595-601
• /
• 2009

The effects of the cation-to-anion resin ratio and bed depth on ion exchange performance of mixed-bed were studied at ultralow solution concentration. Breakthrough curves were experimentally obtained for NaCI solution as functions of resin ratio and bed depth. The bed depth affects the pattern of the sodium breakthrough curve but not the chloride breakthrough curve in beds because of the selectivity difference. Resin selectivity determines the shape of breakthrough curves, Some sodium and chloride breakthrough curves crossed at a point as a function of resin ratio. The lower cation-to-anion resin ratio showed the higher effluent concentration or treated volume of the crossover point regardless of the total resin weight.

• Journal of the Korean Society of Combustion
• /
• v.7 no.3
• /
• pp.23-31
• /
• 2002

Processes in an iron ore sintering bed can characterized as a relatively uniform progress of fuel, cokes combustion and complicated physical change of solid particles. The sintering bed was modelled as an unsteady one-dimensional progress of the fuel layer, containing two phases: solid and gas. Coke added to the raw mix, of which the amount is about 3.5% of the total weight, was assumed to form a single particle with other components. Numerical simulations of the condition in the iron ore sintering bed were performed for various parameters: moisture contents, cokes contents and air suction rates, along with the various particle diameters of the solid for sensitivity analysis. Calculation results showed that the influence of these parameters on the bed condition should be carefully evaluated, in order to achieve self-sustaining combustion without high temperature section. The model should be extended to consider the bed structural change and multiple solid phase, which could treat the inerts and fuel particles separately.