• 제목/요약/키워드: bed temperature

검색결과 1,037건 처리시간 0.027초

느타리버섯 유해균 Hypocrea sp.의 형태 및 URP-PCR 분석 (Morphological Characteristics and URP-PCR Analysis of Hypocrea sp., a Weed Mould of Oyster Mushroom Cultivation)

  • 서건식;김병련;박명수;김민경;유승헌
    • 한국균학회지
    • /
    • 제30권2호
    • /
    • pp.86-94
    • /
    • 2002
  • 느타리버섯 균상에 발생하는 Hypocrea속 균의 분류학적 위치를 확립하기 위하여 유성세대 및 무성세대의 형태적 특징을 조사하였고, 국내 분리 균주의 RAPD, RFLP, URP-PCR 분석 등 분자생물학적 특징을 조사하였다. 1. 충남과 전남 일대의 8개 시, 군의 느타리 재배사에서 19 균주를 분리하였으며 이들 균주간의 형태적, 발생생태학적 변이는 없었고, 기존 보고된 Hypocrea 종들과는 다른 형태적 특징을 나타내었다. 2. Hypocrea 자좌의 크기는 $6.0{\sim}13.0{\times}3.0{\sim}11.0mm$이었고, 위유조직으로 구성되어 있으며 대부분 군생하고 처음엔 백색이지만 성숙되면 노란빛을 띤 갈색을 나타내었다. 자낭각은 구형으로 크기가 평균 $239.9{\times}204.1{\mu}m$이었으며, 자낭에는 16개의 자낭포자(part ascospores)를 형성하였고, 자낭과 장낭포자의 크기는 각각 $103.3{\times}4.9{\mu}m$$6.5{\times}4.7{\mu}m$이었다. 3. 무성세대의 phialide는 보통 Trichoderma virens와 유사한 형태로 모여서 형성되나 때때로 penicillate의 형태도 관찰되었다. T. virens형 phialide의 크기는 $10.8{\times}3.5{\mu}m$이었고 penicilliale형은 $14.7{\times}3.4{\mu}m$이었다. 분생포자는 계란형에서 타원형으로 표면은 매끈하고 크기는 $4.5{\times}2.9{\mu}m$이었다. 4. Hypocrea 균주들의 배양적 특징 조사한 결과, PDA 배지에서 균사생장 최적 온도는 $25^{\circ}C$이었고 자좌는 $15{\sim}25^{\circ}C$ 범위에서 발생하였으며 자좌 발생 최적 온도는 $20^{\circ}C$였다. 5. RAPD 및 RFLP 분석을 실시한 결과 Hypocrea속 균은 공시균주는 모두 단일 유전 개체군으로 느타리 재배사에서 발생하는 Trichoderma속 균 및 기존에 보고된 Hypocrea spp.와는 다른 분류군으로 나타났다.

질적 간호제공을 위한 간호단위 시범 운영 효과에 관한 임상적 연구 (A Clinical Study for Promoting Quality Nusing Care in a University Hospital)

  • 이애주;김선한;성영희;유순애;권인각;정연이;남혜경;권은정
    • 대한간호
    • /
    • 제32권5호
    • /
    • pp.66-77
    • /
    • 1994
  • The purpose of this study was to develop a new nursing unit which can meet changing health care needs, enhance patients' satisfaction and nurses' job satisfaction, and finally guarantee quality nursing care with present manpower. For this, one medical unit was selected as a unit for quality care. And one medical unit which is similar in staffing and patients' characteristics was selected as a control unit. To assess present problems and identify the remedies to the problems a hospital-wide survey and a workshop were performed. According to the survey results, educational programs and improvement of the facilities and equipment supply system, managereal support for interdepartmental cooperation and intensification of bed-side nursing care were adopted as main principles for operating model unit, This model unit was operated for 3 months from Sep. 1, 1992 to Nov. 30, 1992. To evaluate the effectiveness of the model unit, derect/indirect nursing care hours, patients' satisfaction to nursing care, nurses' job satisfaction, and quality care index were measured. Direct/indirect nursing care hours were compared with that of the control unit, and patients' and nurses' satisfaction and quality care index were measured before and after operating model unit and compared with each other. The results of the study were as follows; 1. In the model unit mean direct nursing care hours per cach shift was 146.88 minutes and indirect nursing care hours was 354.72 minutes. The ratio of the direct nursing care hour to indirect nursing hour was 29.6 ; 70.4 and that of the control unit was 26.9 : 73.1. Direct nursing care hour in model unit was longer than that of the control unit. But, the difference was not significant. In subcategories of direct nursing care, the time spent in mobility and exercise, conservation of body temperature, hygiene, and communication and health education were longer than that of the con" trol unit. 2. Indirect nursing care hour in model unit was shorter than that of the control unit. But, the difference was not significant. In subcategories of indirect nursing care, the time spent in drug management and ward arrangement was shorter than that of the control unit. 3. Patients' satisfaction to nursing care was increased significantly after operating the model unit (T=-3.48, P=-0.002) and satisfaction to subcategories of physical comfort measure, psychological cate, and unit management components were significantly higher than before. 4. In the model unit, nurses' total job satisfaction was increased significantly after operating the model unit(Z=2.1004, P=.0357) and satisfaction to subcategory of satisfaction to administration was significantly higher than before (Z=-2.0732, P=.0382). 5. After operating the model unit, quality care index was increased from 89 to 93. With this results, it can be summarized that all the measures tried for quality care, such as educational programs, managereal support for interdepartmental cooperation, and improvement of the equipment and facility provision resulted in partial increase in direct nursing care hours, nurses satisfaction to their job and patients' satisfaction to nursing care. In can be postulated that managereal support and motivation without proper staff supplementation is not enough for increasing direct nursing care hours. And for the enhancement of the level in clinical nursing, and staff supplement must be considered sincerely and the measures for reducing indirect nursing care hours, such as computerization of nursing care activities, improvement of facilities and equipment and facilities supply system, must be instituted in addition.

  • PDF

Ni/Ru-X/Al2O3 (X=K or Mn) 촉매를 이용한 바이오매스 가스화 타르의 수증기개질 (Steam Reforming of Tar Produced from Biomass Gasification Using Ni/Ru-X/Al2O3 (X=K or Mn) Catalyst)

  • 오건웅;박서윤;이재구;김용구;라호원;서명원;윤상준
    • 청정기술
    • /
    • 제22권1호
    • /
    • pp.53-61
    • /
    • 2016
  • 바이오매스 가스화 시 발생하는 타르의 개질 연구가 다양한 Ni 촉매를 이용하여 수행되었다. 바이오매스 타르의 주요 성분인 톨루엔을 이용하여 실험실 규모의 수증기개질을 수행하였다. 고정층 형태의 개질기를 이용하였고 반응온도 범위는 400-800 ℃로 변화시켰다. Ni 촉매에 증진제로 Ru (0.6 wt%)와 Mn 또는 K (1 wt%)를 적용하였다. Ni/Ru-K/Al2O3 촉매가 Ni/Ru-Mn/Al2O3 촉매보다 전반적으로 높은 톨루엔 개질 전환 성능을 보였으며, X-선 회절분석과 열중량분석을 통해 촉매의 안정성을 확인하였다. 실험실 규모 연구 결과를 바탕으로 모노리스와 펠렛 형태의 촉매를 제작하고 1 톤/일 규모의 바이오매스 가스화 시스템에 적용하였다. 모노리스 촉매의 경우 Ni/Ru-K/Al2O3 촉매가 고온에서 특히 우수한 성능을 보였으며, Ni/Ru-Mn/Al2O3 촉매는 운전 시간 경과에 의한 활성저하가 관찰되었다. 펠렛 촉매의 경우 Ni/Ru-K/Al2O3 는 587 ℃에서 66.7%의 타르 전환율을 보였으며, 사용된 촉매의 재생 후 타르 개질 성능을 비교하였다. 본 연구에서 사용된 촉매 중 Ni/Ru-K/Al2O3 펠렛 촉매가 가장 우수한 촉매 활성과 안정성을 보였다.

다양한 배양액 조성이 코이어 수경재배 딸기 '매향'의 생육과 수량에 미치는 영향 (Effect of Various Composition of Nutrient Solution on Growth and Yield of Strawberry 'Maehyang' in Coir Substatrate Hydroponics)

  • 이정훈;이용범;최기영
    • 생물환경조절학회지
    • /
    • 제26권3호
    • /
    • pp.227-234
    • /
    • 2017
  • 본 연구는 딸기 '매향'의 양수분 흡수율을 고려하여 개발한 배양액을 검증하고자 이온 조성이 다른 5종 배양액으로 8개월 동안 수경재배하면서 생육과 수량에 미치는 영향을 조사하였다. 2015년 9월 22일 코이어 고설베드에 딸기 묘를 정식하고 1개월 후 다섯 종류의 배양액 농촌진흥청 딸기 배양액(RDA), 야마자키 딸기 배양액(Yamazaki), PBG 딸기 배양액(PBG), 서울시립대 딸기 배양액(UOS) 및 새로 개발된 서울시립대 딸기 배양액(NewUOS)을 사용하여 EC $1.0dS{\cdot}m^{-1}$, pH 6.0으로 1일 주당 150~300mL 공급하였다. 정식 60일 후 엽폭, 엽병장은 배양액 종류에 차이를 보였으며, 광합성은 RDA와 NewUOS 배양액 처리에서 높았고, PBG 배양액 처리에서 낮았다. 영양생장기 배액의 EC는 공급수준보다 낮은 EC $0.7{\sim}0.8dS{\cdot}m^{-1}$, 이후는 EC $1.0{\sim}1.2dS{\cdot}m^{-1}$로 안정되었다. 배액 pH는 Yamazaki 배양액 처리에서 6.2~6.8로 높은 반면, UOS 배양액은 5.1~5.2로 낮았다. 영양생장기 배액의 무기이온은 질산태 질소의 흡수가 가장 활발하였으며, 화방전개 이후 칼륨 흡수가 NewUOS, UOS 및 Yamazaki 배양액 처리에서 높았다. 정식 6개월 후 지상부와 지하부 생체중과 건물중은 UOS와 NewUOS 배양액에서 높았으며, 지상부 건물율은 Yamazaki 배양액에서 43.5%로 낮았으며, 지하부 건물율은 NewUOS배양액에서 30.6%로 낮았다. 12월부터 2월까지 수확된 딸기의 과장, 과폭, 과중, 당도는 배양액 차이에 의한 유의성은 없으나, NewUOS 배양액에서는 주당 과수와 평균 과중이 높아 수량이 높았다. 3월부터 5월까지 Yamazaki 배양액에서 수확된 딸기는 주당 과수와 수량이 높았다. 따라서 이온 조성 차이에 따른 배양액 5종으로 수경재배하였을 때 '매향'의 생육은 차이를 보이지 않았으나, 시기별 상품성 향상을 위해 정식 후 ~ 2월까지는 NewUOS 배양액을, 고온과 화방당 착과량이 많아지는 3월 이후에는 Yamazaki 배양액으로 재배하는 것이 적합하리라 본다.

LED의 간헐조명과 RGB 비율에 따른 상추의 품종별 생육 특성 (Growth Characteristics of Lettuce under Different Frequency of Pulse Lighting and RGB Ratio of LEDs)

  • 김성진;복권정;이공인;박종석
    • 생물환경조절학회지
    • /
    • 제26권2호
    • /
    • pp.123-132
    • /
    • 2017
  • 본 연구는 상추((Lactuca sativar L.)의 3가지 품종에 대해서 RGB LEDs의 각각의 다른 비율과, 듀티비 50% 조건의 RB LEDs를 이용한 여러 가지 주파수를 가지는 펄스광 조사가 상추의 생장과 형태형성에 미치는 영향을 살펴보기 위하여 수행되었다. 파종 후 육묘 기간을 거쳐 유사한 외형을 갖는 묘를 선발하여 재배 룸의 온도와 습도, $23{\pm}1^{\circ}C/50-60%$(주간)과 $18{\pm}1^{\circ}C/70-85%$(야간) 조건에서 담액수경재배로 4주간 재배하였다. 광합성유효광량자속밀도(PPFD)는 재배베드 위에서 $110{\pm}3{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, RGB 비율은 6:3:1, 5:2.5:2.5, 3:3:4, 2:2:6, 1:1:8 이었다. 50% 듀티비를 갖는 펄스광은 RB LEDs로 구성되었고 설정된 주파수는 50, 100, 500, 1,000, 5,000, 10,000, 25,000Hz(20, 10, 0.1, 0.04ms) 이었다. RGB 비율 6:3:1에서 적축면 상추의 생체중은 다른 RGB 처리구와 비교하여 유의적으로 높은 값을 보였으나, 대조구인 형광등 처리구와는 유의적 차이가 발생되지 않았다. RGB 비율 1:1:8의 조건에서, 롤로로사는 생체중, 그랜드 래피드는 엽수와 생체중이 다른 RGB 처리구와 비교하여 유의적으로 낮았다. 청색광의 비율이 증가할수록, 3개 품종 모두에서 엽장이 감소하면서 엽형이 둥근 형태로 발달하였다. RB LED로 구성된 LED 광조건 하에서 50% 듀티비 조건과 처리된 여러 주파수의 증가 또는 감소에 따른 상추의 생육 및 형태형성에 미치는 경향성을 발견하기 힘들었다.

남부지방 조 이식재배시 육묘폿트의 적정규격 및 주당본수 (Adequate Standard Pot and Number of Plants Per Tree of Raising Seeding Pot on the Foxtail Millet Transplanting Culture in the Southern Province)

  • 김용순;김동관;최진경;박흥규;김명석;신해룡;최경주;윤종탁
    • 한국작물학회지
    • /
    • 제60권1호
    • /
    • pp.23-28
    • /
    • 2015
  • 최근 웰빙 건강식품으로 용도가 다양한 조, 기장, 수수작물의 잡곡육성을 위한 연구개발 및 정책지원이 활발히 추진되고 있다. 조는 생육기간이 90~130일 정도로 짧고 생육온도에 대한 변이가 커서 넓은 지역에 적응할 수 있고 기상재해에 대한 내성도 크다. 본 연구는 남부지방 조 생력재배 기술을 개발하고 육묘방법과 이식방법의 현장적용 가능성을 평가하기 위해 수행하였으며 주요결과는 다음과 같다. 조 육묘방법의 폿트종류별 이식 당시 모소질은 406구, 200구, 162구간에 유의성이 없었으며 본포 활착률은 모두 94~95%를 나타내었다. 수량은 10a당 406구 305 kg > 162구 303 kg > 200구 302 kg을 나타내어 처리간 유의성이 없는 것으로 나타났다. 육묘이식재배시 폿트를 이용할 경우 406구 폿트가 200구 대비 상토 63%, 폿트 50%, 작업시간 18%가 절감되었다. 조 이식방법별 이식 당시 모소질은 이식본수가 적을수록 건조중은 높은 경향이었고 본포 활착률은 모두 95% 이상을 나타내었다. 10a당 수량은 2본 육묘이식 315 kg > 3본 육묘이식 304 kg > 1본 육묘이식 256 kg/10a 순으로 나타났다. 조 육묘이식재배시 폿트종류별 소요경비는 10a당 406구 폿트가 76,230원으로 200구에 비해 40%가 절감되는 것으로 나타나 406구폿트에 2본씩 육묘이식재배 하는 것이 생력화에 적당한 것으로 판단되었다.

양송이 재배(栽培)에 따른 재배상퇴비(栽培床堆肥)의 성분변화(成分變化)에 관(關)한 연구(硏究) (Studies on the Compositional Change of Composts During Mushroom Cultivation)

  • 남궁희
    • Applied Biological Chemistry
    • /
    • 제18권4호
    • /
    • pp.203-218
    • /
    • 1975
  • 양송이 재배중(栽培中) 재배상(栽培床) 퇴비(堆肥)의 성분변화(成分變化)를 파악(把握)하기 위하여 양송이의 대규모(大規模) 생산(生産) 조건하(條件下)에서 퇴비입상후(堆肥入床後) 수확(收穫)이 끝나는 폐상시기(廢床時期)까지의 재배상퇴비(栽培床堆肥) 및 양송이 자실체(子實體)의 여러가지 성분(成分)을 분석(分析)하여 다음과 같은 결과(結果)를 얻었으며 재배상(栽培床) 퇴비(堆肥)의 숙성기작(熟成機作)을 제시(提示)하였다. 1) 재배상(栽培床) 및 배양실(培養室)의 온도변화(溫度變化)와 양송이의 수량(收量)을 주기별(週期別)로 조사(調査)하였고 전체수량(全體收量)은 $15.6kg/m^2$이었다. 2) 입상직후(入床直後)의 퇴비(堆肥)는 pH8.2이었으나 복토시기(覆土時期)부터 pH 6.4로 떨어져 폐상시(廢床時)까지 유지(維持)되었다. 3) 재배상(栽培床) 퇴비(堆肥)의 일반성분(一般成分)을 고형물(固形物) 기준(基準)으로 볼 때 회분(灰分)은 증가(增加)하였으나 전실소(全實素), 에텔 추출물(抽出物), 조섬유(粗纖維)는 계속으로 감소하였으며 결국 유기물(有機物)의 감소하였으며 결국 유기물(有機物)의 감소를 초래하였다. 4) 재배상(栽培床) 퇴비(堆肥)의 전실소(全實素)는 계속적으로 감소하였으며 부용성(不溶性) 실소(室素)의 감소량(減少量)이 수용성(水溶性) 실소(實素)보다 더 컸고, C/N율(率)은 최초(最初) 21이던것이 16으로까지 점차적으로 감소하였다. 5) 재배상(栽培床) 퇴비(堆肥)의 탄수화물(炭水化物)중 ${\alpha}-cellulose$, pentosan, lignin은 각각 87%, 75%, 60%씩 소실되었으며 특히 ${\alpha}-cellulose$는 복토직후(覆土直後)에 크게 감소(減少)하였다. 6) 재배상(栽培床) 퇴비(堆肥)의 유리환원당(遊離還元糖)은 계속적으로 증가(增加)하였고, 유리(遊離)아미노산(酸)을 수확초기(收穫初期)까지 증가(增加)하다가 폐상시(廢床時)에는 다시 감소하였다. 입상시(入床時)의 퇴비(堆肥)에는 alanine, glutamic acid, glycine, serine이 검출(檢出)되었으나 양송이 재배(栽培)에 따라 glycine은 크게 감소하는 반면(反面) proline이 크게 증가(增加)하였다. 7) 재배상퇴비(栽培床堆肥)의 무기원소(無機元素) 중 P, Zn은 감소하는 경향이 있고, Cu은 증가(增加)하는 경향이있으며 K, Na은 큰 변화(變化)가 없었다. 8) 수확주기(收穫週期)가 다른 양송이의 일반성분(一般成分), 무기성분(無機成分), 유리환원당(遊離還元糖) 및 아미노산(酸)을 분석(分析) 비교(比較)한 결과(結果) 큰 차이가 없었으나 조지방(粗脂肪), 환원당(還元糖), Na함량(含量)은 초기수확(初期收穫)의 것에서, 아미노산(酸) P은 후기수확(後期收穫)의 것에서 약간 높았다. 양송이중의 유리(遊離)아미노산(酸)으로는 alanine, serine, threonine glutamic acid를 위시(爲始)하여 12종(種)이 검출(檢出)되었다. 9) 본실험(本實驗)으로 재배상(栽培床) 퇴비(堆肥)의 숙성(熟成) 과정은 중온균(中溫菌)에 의한 암모니아의 생성(生成)과 탄수물화(炭水物化)의 분해에 이어 고온균(高溫菌)에 의한 단백질합성(蛋白質合成), 균경형성(菌經形成) 그리고 다실소(多室素) lignin 부식복합기(腐植複合畿)를 형성(形成)하고 이들 성분(成分)이 잔류(殘留)하는 탄수화물(炭水化物)과 함께 양송이의 영양원(營養源)을 이루게 되는 숙성기작(熟成機作)을 뒷받침 할 수 있었다.

  • PDF

벼의 자연통풍건조에 있어서 통풍량이 건조에 미치는 영향에 관한 연구 (A Study on Effects of Air-delivery Rate upon Drying Rough Rice with Unheated Air.)

  • 이상우;정창주
    • 한국농공학회지
    • /
    • 제16권1호
    • /
    • pp.3293-3301
    • /
    • 1974
  • An experimental work was conducted by using a laboratory-made model dryer to investigate the effect of the rate of natural forced-air on the drying rate of rough rice which was deposited in the deep-bed. The dryer consisted of 8 cylinderical containers with grain holding screen at their bottoms, each of which having 30cm in diameter and 15cm in height. The containers were sacked vertically with keeping them air-tight by using paper tape during dryer operation. Two separate layers of containers were operated in the same time to have two replications. The moisture contents of grains within each bins after predetermined period of dryer operation were determined indirectly by measuring the weight of the individual containers. The air-rates were maintained at 6 levels, or 5, 8, 10, 15, 18 and 20 millimenters of static head of water. The roomair conditions during dryer operation were maintained in the range of 10-l5$^{\circ}C$ in temperature and 40-60% in relative humidity. The results of the study are summarized as follows: 1. Drying characteristics of the grains in the bottom layers were approximately the same regardless of airdelivery rates, giving the average drying rate as about 0.35 percent per hour after 40-hour drying period, during which moisture content (w. b.) reduced from 24 percent to about 10 percent. 2. After about 40-hour drying period, the mean drying rates increased from 0.163 percent per hour to 0.263 percent per hour as air-flow rates increased from 5mm to 87.16mm of static head of water. In the same time, the moisture differences of grains between lower and upper layers varied from 12.7 percent at the air rate of 5mm of water head to 7.5 percent at the air-flow rate of 20mn of water head. Thus, the greater the air-flow rate was, the more overall improvement in drying performance was. Additionally, from the result of ineffectiveness of drying grain positioned at 70cm depth or above by the air rate of 5mm of static head of water it may be suggested in practical application that the height of grain deposit would be maintained adequately within the limits of air-rates that may be actually delivered. 3. Drying after layer-turning operation was continued for about 30 hours to test the effectiveness of reducing moisture differences in the thick layers. As a result of this layer-turning operation, moisture distribution through layers approached to narrow ranges, giving the moisture range as about 7 percent at air-flow rate of 5mm head of water, about 3 percent at 10mm head about 2 percent at 15mm head, and less than 1 percent at 20mm head. In addition, from the desirable results that drying rate was rapid in the lower layers and dully in the upper layers, layer-turning operation may be very effective in natural air drying with deep-layer grain deposit, especially when the forced air was kept in low rate. 4. Even though the high rate of air delivery is very desirable for deep-layer natural-air drying of rough rice, it can be happened that the required air delivery rate could not be attained because of limitation of power source available on farms. To give a guide line for the practical application, the power required to perform the drying with the specified air rate was analyzed for different sizes of drying bin and is given in Table (5). If a farmer selects a motor of which size is 1 or {{{{1 { 1} over {2 } }}}} H.P. and air-delivery rate which ranges from 8~10mm of head, the diameter of grain bin may be suggested to choose about 2.4m, also power tiller or other moderate size of prime motor may be recommended when the diameter of grain bin is about 5.0m or more for about 120cm grain deposit.

  • PDF

백령도 절골저수지의 부영양화와 담수적조 (Eutrophication and Freshwater Red-tide Algae on Early Impoundment Stage of Jeolgol Reservoir in the Paikryeong Island, West Sea of South Korea)

  • 이흥수;허진;박재충;신재기
    • 생태와환경
    • /
    • 제39권2호통권116호
    • /
    • pp.271-283
    • /
    • 2006
  • 섬 지역의 초기 담수과정에 있는 상수원 저수지 (절곡저수지)에서 수색 악화와 여과지 폐색의 원인을 분석하기 위해 2005년 8월에 식물플랑크톤을 포함한 다각적인 수환경 조사를 수행하였다. 저수지의 형태는 단순하였고, 평균 수심은 5.5 m로서, 상류에서 얕고 댐 부근에서 가장 깊었다. 환경요인 중에서 수평적 또는 수직적 차이가 큰 인자는 DO, Chl-a이었고,가장 작은 인자는 수온이었다. 수중 투명도는 0.6 ${\sim}$ 0.9 m범위(평균값 0.7 m)이었고, 탁도의 평균값은 9.3 NTU (8.0 ${\sim}$ l2.1 NTU범위)이었다. 후명도와 탁도의 증감요인은 생물 또는 비생물의 복한적인 영향으로 달 수 있었고 공간적인 차이도 탄영되었다. 수색이 탁한 것은 무기입자의 증가와 식물플랑크톤치 과대증식 영향이 주된 원인이었고, 여과지 폐색은 저수지로부터 식물플랑크톤의 과잉 공급에 의한 문제점이었다. 저수지 내 chlorophyll-a농도의 범위와 평균값은 상층에서 31.6 ${\sim}$ 258.9 ${\mu}g\;L^{-1}$, 123.6 ${\mu}g\;L^{-1}$, 저층에서 17.0 ${\sim}$ 37.4 ${\sim}$, 26.5 ${\sim}$이었다. Chlorophyll-a의 증가는 담수적조의 대발생 영향이었고, 주종은 와편모조류 Peridinium bipes f. occultatum이었다. Peridinium의 분포는 chlorophyll-a농도와 밀접한 관련성이 있었다. 담수적조의 현존량은 상류지역에서 $8.5\;{\times}\;10^3\;cell\;mL^L{-1}$로서 많았고, 댐부근의 하류지역($4.4\;{\times}\;10^2\;cell\;mL^L{-1}$)으로 갈수록 감소하는 양상을 보였다. 또한, 담수적조의 원인종으로 규조류 Synedra acus와 남조류 Microcystis aeruginosa도 소량관찰되었다. 저수지의 수질 부영양화 현상은 기존 경사사면형 농경지를 기반으로 조성되었으므로 저층으로부터 풍부한 영양환경을 내재하고 있었고, 담수 초기에 발생할 수 있는 가능성을 포함하고 있었다. 또한 유입수량의 부족과 현재 수질개선을 위해 적용하고 있는 수중폭기시설등의 물리적인 영향도 직 ${\cdot}$ 간접적으로 작용하였을 것으로 추정되었다 따라서 향후 이에 대한 중장기적인 모니터링이 필요하였고 유역과 저수지의 통합적인 수질관리계획 이 요구되었다.

초임계수 산화를 이용한 음이온교환수지 분해 (Supercritical Water Oxidation of Anionic Exchange Resin)

  • 한주희;한기도;도승회;김경숙;손순환
    • 대한환경공학회지
    • /
    • 제28권5호
    • /
    • pp.549-557
    • /
    • 2006
  • 화력발전소에서 발생하는 폐 음이온교환수지를 분해하기 위해 초임계수 산화 특성 연구를 진행하였다. 폐수지는 음이온교환수지와 양이온교환수지가 혼합된 상태로 배출되었으며, 혼합된 폐수지에서 고-액 유동층을 이용하여 음이온수지를 분리하였다. 분리된 음이온 수지는 원소분석과 열분석을 통해 양이온 수지가 혼합되지 않았음을 확인하였다. 음이온수지를 고압 펌프를 이용하여 초임계수 산화 반응 장치에 연속적으로 주입하기 위해 습식 ball mill을 이용하여 분쇄, 슬러리로 제조하였다. 압력 25.0 MP콘 체류시간 2분, 반응 온도 $500^{\circ}C$에서 처리수의 COD는 99.9%이상 분해됨을 확인하였지만, 총 질소 분해율은 41% 정도로 나타났으며, 슬러리에 질산을 혼합하면 처리수의 총 질소가 감소하였다. 처리수의 COD와 총 질소(T-N) 함량을 목적변수로 설정하여 음이온 수지 슬러리를 분해하는 최적 조건을 도출하기 위해 통계적 실험계획법인 중심합성계획법을 적용하였다. 처리수의 COD는 반응 온도 $500{\sim}540^{\circ}C$, 압력 25.0 MPa, 반응기 체류시간 2분 조건에서 $99.9{\sim}100%$까지 충분히 분해되었으며, 온도 변화와 질산 주입량 변화에 영향을 받지 않았다. 그러나 처리수의 총 질소는 질산 주입량의 변화에 대한 영향이 큰 것으로 확인되었다. 처리수의 총 질소는 회귀분석을 통해 질산 주입량의 함수로 나타낼 수 있었으며, 결정계수($r^2$)는 95.8%로 계산되었다.