• 한국입자에어로졸학회지
• /
• 제13권2호
• /
• pp.79-85
• /
• 2017

실험실 규모의 유동층 반응기(Length=0.25m, Diameter=0.05m)에서 고부가가치 물질인 희유금속 산화물 $NiO/MoO_3/MoS_2$의 공탑속도에 따른 최소유동화 속도 및 압력손실 경향을 확인하였다. 시료의 L/D 1, 2, 3 변화에 따른 Superficial gas velocity 0.07~0.45 m/s 범위에서 $NiO/MoO_3/MoS_2$의 L/D 1, 2, 3에서의 평균 압력손실은 Decreasing flux에서 290~1952 Pa, Increasing flux에서 253~1925 Pa로 나타났다. Wen이 제시한 이론값과 실험데이터를 비교해본 결과, 0.021~0.36배 차이나는 것을 확인하였다. 이번 결과를 통하여, 희유금속 산화물을 실제 현상에서 적용 가능한 운전조건을 결정할 수 있었다.

• 한국수자원학회논문집
• /
• 제41권5호
• /
• pp.503-515
• /
• 2008

본 연구에서는 연속적인 수위 자료를 이용하여 경사면적법으로 유량을 산정하고 그 결과를 분석하였다. 대상 하천은 괴산댐 하류의 달천으로 여울과 웅덩이를 포함하는 약 960m의 구간이다. 하상 재료의 입경을 분석하였고 이를 이용하여 3가지 조도계수값을 산정하여 유량 계산에 활용하였으며, 추가로 하천정비기본계획의 조도계수도 사용되었다. 경사면적법으로 계산된 유량은 댐 방류량과 비교되었다. 댐 방류량과 비교한 상대오차는 조도계수에 큰 영향을 받는 것으로 나타났으며, 연구 대상 구간에 적절한 조도계수는 0.042 이상인 것으로 나타났다. 대상 구간의 평균하상 경사보다 완만한 수면경사를 갖는 계산 구간에서는 구간 전체의 조도계수보다 낮은 조도계수를 사용할 경우 유량 오차가 적었으며, 수면경사가 평균하상경사보다 급한 구간에서는 조도계수를 크게 사용하여야 상대오차가 감소하는 것으로 나타났다. 하도의 전체적인 하상경사를 고려하여 조도계수를 설정할 경우에는 수면경사가 완만한 구간과 급한 구간을 모두 포함하도록 전체 계산 구간을 설정하는 것이 적절한 것으로 나타났다. 500 cms 이상의 유량에서는 실측 유량과의 상대 오차가 일정해지므로, 비교 유량 측정이 이루어질 경우 조도계수를 검증한 후, 경사면적법을 적용함으로써 간접 유량측정 결과의 정확도를 높일 수 있을 것으로 판단된다.

• Archives of Plastic Surgery
• /
• 제37권4호
• /
• pp.469-472
• /
• 2010

Purpose: Aplasia Cutis Congenita (ACC) is a rare disease characterized by the focal defect of the skin at birth, frequently involving scalp, but it may affect any region of the body. There are no etiology known but some conditions such as intrauterine vascular ischemia, amniotic adherences and viral infections are associated. The ideal treatment for the ACC is not known. Superficial and relatively small sized defects (< $3{\times}5\;cm$) may heal spontaneously and large defects related with risks of infection and bleeding may require aggressive surgical treatment. Hyalomatrix$^{(R)}$ is a bilayer of an esterified hyaluronan scaffold beneath a silicone membrane. It has been used as a temporary dermal substitute to cover deep thickness skin defect and has physiological functions derive from the structural role in extracellular matrix and interaction with cell surface receptor. This material has been used for the wound bed pre-treatment for skin graft to follow and especially in uncooperative patient, like a newborn, this could be a efficient and aseptic way of promoting granulation without daily irritative wound care. For this reason, using Hyalomatrix$^{(R)}$ for the treatment of ACC was preferred in this paper. Methods: We report a case of a newborn with ACC of the vertex scalp and non-ossified partial skull defect. The large sized skin and skull defect ($6{\times}6\;cm$) was found with intact dura mater. No other complications such as bleeding or abnormal neurologic sign were accompanied. Escharectomy was performed and Hyalomatrix$^{(R)}$ was applied for the protection and the induction of acute wound healing for 3 months before the split-thickness skin graft. During the 3 months period, the dressing was renewed in aseptic technique for every 3 weeks. The skin graft was achieved on the healthy granulation bed. Results: The operative procedure was uneventful without necessity of blood transfusion. Postoperative physical examination revealed no additional abnormalities. Regular wound management was performed in out-patient clinic and the grafted skin was taken completely. No other problems developed during follow-up. Conclusion: Hyalomatrix$^{(R)}$ provides protective and favorable environment for wound healing. The combination of the use of Hyalomatrix$^{(R)}$ and the skin graft will be a good alternative for the ACC patients with relatively large defect on vertex.

• 한국식품조리과학회지
• /
• 제19권4호
• /
• pp.477-492
• /
• 2003

The purposes of the study were to establish HACCP-based standards and guidelines for conducting a plan review to build, or renovate, hospital food service establishments, and ensure the safety of foodservice and reduce the risk of food borne illness. The scope of the study included suggestion for the planning of hospital foodservice facilities: layout, design, equipment and modeling. The results of this study can be summarized as follows: 1) The development of a foodservice facility plan based on the results of a survey, literature reviews and the results of interviews with foodservice managers from 9 general hospitals. This was composed of operational policies in foodservices, layout characteristics, space allocation, selection, design, specification standards for equipment and the construction principles of foodservice facilities. 2) Two foodservice facility models were developed, one for general hospitals with 900 beds (2,000 patients and 2,500 employee meals per day) and the other for general hospitals with 300 beds (600 patients and 650 employees meals per day). 3) The suggested kitchen space requirements for the foodservice facility models were 341.2 ㎡ (W 17,100mm x L 23,700mm) and 998.8㎡ (W 35,600mm x L 32,800mm) for the 300 and 900 beds hospitals, respectively, with both designs being rectangular. The space requirements for the equipment, in relation to the total operational area, in terms of ratios were 1:3.5 and 1:3.8 for the 300 and 900 beds hospitals, respectively. The recommended space allowances per bed for the developed foodservice facility models were 1.15 ㎡ and 1.11 ㎡ for the 300 and 900 beds hospitals, respectively, which were increased by more than 30% compared to those suggested in the precedent study, and considered appropriate for the implementation of the HACCP system. 4) The hospital foodservice facilities plans and models were developed based on the general sanitation standards, guidelines and the HACCP system, and included foodservice facility layout, product flow, physical separation between contaminated and sanitary areas, foodservice facility specifications with a 1/300 scale for a 300 bed, and a 1/400 scale for a 900 beds blueprint. 5) The main features of the developed foodservice facility plans and models were; physical separation between contaminated and sanitary areas to prevent cross contamination, product flow in one direction from the arrival of the raw material to the finished product, and separation of different work areas and the process of receiving & preparation of products, refrigeration & storage, cooking, assembly, cleaning & disinfection, employee areas and janitorial facilities. The proposed models from this study were presented as examples for those wanting to build, or renovate, their facility for the production of foods.

• 한국건설순환자원학회논문집
• /
• 제6권4호
• /
• pp.331-335
• /
• 2018

이 연구에서는 건조 모르타르에 사용되는 천연 골재의 대체재로 CFBC 인공 잔골재의 활용가능여부를 확인하고자 건조 모르타르의 플로우와 압축강도를 포함한 기본적인 성능시험과 건조모르타르에서 제품의 품질을 규정하는 데 중요한 성능인 건조수축 성능을 평가하였다. 이를 위하여 천연 골재만 사용한 시험체, 천연 골재에 개질 CaO 팽창재를 혼입한 시험체, CFBC 인공잔골재에 개질 CaO 팽창재를 혼입한 시험체, 마지막으로 CFBC 인공 잔골재만 사용한 시험체를 4종을 제작하여 각 시험체별 길이변화량을 측정하였다. 건조수축 성능 평가결과 재령 20일 기준 천연 규사에 개질 CaO 팽창재를 사용한 시험체의 건조수축 성능이 변형률 $250{\times}10^{-6}$으로 가장 높게 나타났다. 한편, CFBC 인공 잔골재에 개질 CaO 팽창재를 혼입한 시험체는 수축량이 $410{\times}10^{-6}$을 나타내었으며 천연 잔골재를 사용한 건조 모르타르의 건조 수축량은 $450{\times}10^{-6}$으로 개질 CaO 팽창재를 활용할 경우에는 천연 골재를 사용한 건조 모르타르의 건조수축 성능과 동등 이상의 성능을 발휘하였다.

• Korean Chemical Engineering Research
• /
• 제61권3호
• /
• pp.419-425
• /
• 2023

본 논문은 상용 바이오매스 발전소 가동 조건에서 열교환기 튜브의 고온 부식 특성 분석 결과를 보고하였다. 3종의 상용 열교환기 튜브(SA213T12, SA213T22, SA213T91) 및 열교환기 튜브의 표면 온도 조절이 가능하도록 자체 설계된 고온 부식 평가 장치를 사용하였으며, 약 300시간 동안 다양한 온도 및 가동 조건에서 고온 부식 실험을 수행하였다. 열교환기 튜브 소재에 따른 온도별 고온 부식 특성을 객관적으로 분석하기 위해서 국제표준(ISO 8407)에 입각하여 부식생성물을 제거 후 고온 부식 실험 전후의 튜브 시편 무게 변화량을 산출하였다. 이를 통해 최종적으로 튜브 시편의 평균 두께 감육량 및 감육 속도를 도출하였으며, 전자현미경(FE-SEM) 및 에너지분산형 분광분석법(EDS)을 이요하여 튜브 시편의 표면과 단면의 부식 상태를 분석하였다. 본 연구 결과, 상용 열교환기 소재의 구성 성분 중 크롬과 니켈의 함량이 증가할수록 소재의 고온 부식 특성이 우수하며, 표면 온도가 증가할수록 고온 부식이 촉진되는 것을 확인하였으며, 열교환 온도 조건에 따른 열교환기 튜브 교체주기를 예측할 수 있었다.

• 융복합기술연구소 논문집
• /
• 제6권2호
• /
• pp.35-40
• /
• 2016

Ignitor tip is a component of burner to start the burning process in power plant. This is used to ignite the coal to a constant operating state by fuel mixed with air and kerosene. This component is composed of three components so that air and kerosene are mixed in the proper ratio and injected uniformly. Because the parts with the designed shape are manufactured in the machining process, they have to be made of three parts. These parts are designed to have various functions in each part. The mixing part mixes the supplied air and kerosene through the six holes and sends it to the injecting part at the proper ratio. The inject part injects mixed fuel, which is led to have a constant rotational direction in the connecting part, to the burner. And the connecting plate that the mixed fuel could rotate and spray is assembled so that the flame can be injected uniformly. But this part causes problems that are worn by vibration and rotation because it is mechanically assembled between the mixing part and the inject part. In this study, 3D printing method is used to integrate a connecting plate and an inject part to solve this wear problem. The 3D printing method could make this integrated part because the process is carried out layer by layer using a metal powder material. The part manufactured by 3D printing process should perform the post process such as support removal and surface treatment. However, while performing the 3D printing process, the material properties of the metal powders are changed by the laser sintering process. This change in material properties makes the post process difficult. In consideration of these variables, we have studied the optimization of manufacturing process using 3D printing method.

• Journal of Periodontal and Implant Science
• /
• 제33권2호
• /
• pp.289-299
• /
• 2003

The autogenous free gingival graft is the most predictable procedure currently used to increase the width of　the attached gingiva in periodontics. But the major disadvantage of the procedure is to create the multiple surgical wounds at both a donor site and a recipient site. The other problem is the limited amount of available　graft material in oral cavity. Therefore, recent researches have been focused to develop the biomaterial to substitute the autogenous gingival tissue. The purpose of this study was to evaluate the histologic healing after　grafting of bilayer artificial dermis, compared to the free gingival graft. Four non-smoking subjects (mean age, 32.5 years) in systemically healthy state and good oral hygiene were selected according to their particular needs for correction of mucogingival problems as suggested by Nabers(1966). The recipient sites were prepared through the procedure for the free gingival graft and were grouped according to the graft materials: Experimental group(n=5) - bilayer artifcia1 dermis ($Terudermis^{(R)}$; Terumo Co. Japan) and Control group(n=6) - free gingival graft with autogenous palatal mucosa. Biopsies were harvested at 1,2,3 and 6 weeks postsurgery to evaluate histologically. At the third week in the experimental group and at the second week of in the control group, the grafts has been clinically stabilized on the recipient bed and the graft border has been blended into the surrounding tissue. In the experimental group after 1 week of grafting, the epithelial migration from the adjacent tissue to graft material was seen and after 3 weeks of grafting, the : nflmmation decreased, collagen layer of the artificial dermis was lost and the basement membrane of epithelium was formed. After 6 weeks of grafting, both groups demonstrated orthokeratinized epithelium and increased thickness of epithelial tissue and the rete peg formation, similar to the adjacent tissue, Histologic evaluation revealed a biologic acceptance and incorporation of the collagen layers of the graft tissue to the host tissue, without foreign body reaction. In conclusion, a bilayer artificial dermis is essentially similar to autogeneous free gingival graft in the correction of mucogingival problems, and has the advantages of decreased patient morbidity (no donor site) and availability of abundant amounts of graft material when needed.

• 한국산업보건학회지
• /
• 제30권2호
• /
• pp.153-162
• /
• 2020

Objectives: 3D printing technologies have become widely developed and are increasingly being used for a variety of purposes. Recently, the evaluation of 3D printing operations has been conducted through chamber test studies, and actual workplace studies have yet to be completed. Therefore, the objective of this study was to determine the emission of volatile organic compounds(VOCs), metals, and particles from printing operations at a workplace. This included monitoring conducted at a commercial 3D printing service workplace where the processes involved material extrusion, material jetting, binder jetting, vat photo polymerization, and powder bed fusion. Methods: Area samples were collected with using a Tenax TA tube for VOC emission and MCE filter for metals in the workplace. For particle monitoring, Mini Particle Samplers(MPS) were also placed in the printer, indoor work area, and outdoor area. The objective was to analyze and identify particles' size, morphology, and chemical composition using transmission electron microscopy with energy dispersive spectroscopy(TEM-EDS) in the workplace. Results: The monitoring revealed that the concentration of VOCs and metals generated during the 3D printing process was low. However, it also revealed that within the 3D printing area, the highest concentration of total volatile organic compounds(TVOC) was 4,164 ppb at the vat photopolymerization 3D printing workplace, and the lowest was 148 ppb at the material extrusion 3D printing workplace. For the metals monitoring, chromium, which, is carcinogenic for humans, was detected in the workplace. As a characteristic of the particles, nano-sized particles were also found during the monitoring, but most of them were agglomerated with large and small particles. Conclusions: Based on the monitoring conducted at the commercial 3D printing operation, the results revealed that the concentration of VOCs and metals in the workplace were within Korea's occupational exposure limits. However, due to the emission of nano-sized particles during 3D printing operations, it was recommended that the exposure to VOCs and metals in the workplace should be minimized out of concern for workers' health. It was also shown that the characteristics of particles emitted from 3D printing operations may spread widely within an indoor workplace.

• 한국환경농학회지
• /
• 제25권2호
• /
• pp.118-123
• /
• 2006

국내에서 구입이 용이한 단일충전재(부숙수피, 펄라이트)와 혼합충전재(부숙수피와 펄라이트의 부피비 7:3)에 암모니아 산화균 Rhodococcus equi A3와 황 산화균 Alcaligenes sp. S5-5.2를 접종한 후, 양압식 상향류식의 lab-scale 바이오필터에 각각의 충전재를 충전하여 암모니아 및 황화수소에 대한 악취가스 제거 성능을 평가 한 결과, 혼합충전재가 단일 충전재에 비하여 악취제거 성능이 우수한 것으로 분석되었다. 또한 암모니아의 경우 $180.0{\pm}20.0mg\;L^{-1}$ 농도로 유입되는 상황에서 $70.0{\pm}0.8mg\;L^{-1}$로 배출되어 제거율이 96.1%이었으며, 그리고 황화수소의 경우 $11.0{\pm}5.0mg\;L^{-1}$ 농도로 유입되는 상황에서 $1.0{\pm}0.4mg\;L^{-1}$로 배출되어 제거율이 91.1%이었다. 또한 이때의 미생물 생균수는 실험기간 동안 접종 초기 미생물 생균수와 거의 같게 유지되었다. 따라서 부숙수피와 펄라이트를 혼합하여 만든 혼합충전재의 악취제거 성능이 우수하고 가격이 저렴한 것을 고려해 볼 때, 혼합충전재가 기존의 다른 충전재보다 대규모 축산농가에서 현실적으로 이용하는데 유리할 것으로 판단된다.