• Journal of the Korean Chemical Society
• /
• v.36 no.3
• /
• pp.393-404
• /
• 1992

The response properties of continuous automated system using an enzyme reactor for determination of urea were investigated. The enzyme reactor was constructed to packed-bed form which filled with nylon-6 beads (42∼48 mesh), which immobilized urease with glutaraldehyde, in teflon tube (2 mm I.D., 20 cm length). The system was composed of the enzyme reactor, gas dialyzer, and tublar PVC-nonactin membrane ammonium ion-selective electrode as an indicator electrode in serial order. The response characteristics of this system were as follows. That is, the concentration range of linear response, slope of linear response, detection limit, and conversion percentage were $5.5{\times}10^{-6}$∼$2.4{\times}10^{-3}M$, 57.8 mV/decade, $1.5{\times}10^{-6}$, and 80.8%, respectively. The optimum buffer and life time of urease reactor were 0.01M Tris-HCl buffer solution (pH 7.0∼7.8) and 0.01M phosphate buffer solution (pH 6.9∼7.5) and about 150 days, respectively. And the urease reactor had no interferences of the other physiological materials.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.447-452
• /
• 2013

In this study we report a new method for the synthesis of a silica monolithic column bed with bimodal pores (throughpores and mesopores). The template induced synthesis method was used to direct bimodal pores simultaneously instead of the usual post base-treating method. Block polymer Pluronic F127 was chosen as a dual-function template to form hierarchically porous silica monolith with both macropores and mesopores. This is a simplification of the method of monolithic column preparation. Poly(ethylene glycol) was used as a partial substitute for F127 can effectively prevent shrinkage during the monolith aging process without losing much surface area (944 $m^2/g$ to 807 $m^2/g$). More importantly, the resultant material showed a much narrower mesopore size (centered at 6 nm) distribution than that made using only F127 as the template reagent, which helps the mass transfer process. The solvent washing method was used to remove the remaining organic template, and it was proved to be effective enough. The new synthesis method makes the fabrication of the silica monolithic column (especially capillary column) much easier. All the structure parameters indicate that monolith PFA05 prepared by the above method is a good material for separation, with the merits of much higher surface area than usual commercial HPLC silica particles, suitable mesopore volume, narrow mesopore size distribution, low shrinkage and it is easily prepared.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.6
• /
• pp.123-129
• /
• 2018

Recently, there has been a growing interest in the study of treatment of $CO_2$ generated by industrial activities and resource recycling of industrial byproducts. The aim of this study is to investigate the applicability of industrial byproducts that can be used as concrete mixed materials by carbonation curing. For this purpose, the physical and chemical changes of the pastes with research cement(RC), blast furnace slag powder (GGBFS) and circulating fluidized bed combustion ashes (CFBC) were evaluated by carbonation curing. XRD and SEM analyzes were performed to investigate micro-structural changes. As a result, it was confirmed that calcium carbonate, which is a reaction product produced by carbonation curing, filled the space inside the paste and formed a dense micro-structure. Also, as the $CO_2$ curing time increased, it was confirmed that calcium carbonate crystals were grown together to form a dense micro-structure.

• Journal of Korean Society on Water Environment
• /
• v.32 no.2
• /
• pp.135-141
• /
• 2016

This study investigated changes of hydrology, soil characteristics, riparian vegetation communities, and geomorphology in sandbars before and after sand-mining to determine the effect of sand-mining at upstream of Guemgang and Bochungcheon streams in Korea. Sand-mining events affected the mining area. They supplied organic matters and nutrients during flood. Sediment deposition caused soil texture change and expansion of vegetation area. However, riverbeds were stabilized after the disturbance. According to the analyses of aerial photographs, the vegetation area was significantly expanded in both dam-regulated streams and dam-unregulated streams after sand-mining. Willow shrubs advanced in disturbed area at an average of 10 years after sand-mining. It took willows trees 10.6 years to become dominant communities. Therefore, it took a total of 20.6 years for new riparian forest to form in sandbar after sand-mining. Our results confirmed that stream flow condition were dependent on vegetation recruitment in dam-regulated streams and dam-unregulated streams. For willow recruitment in unregulated streams, calculation of water level below dimensionless bed shear stress is important because low water level variation is a limiting factor of vegetation recruitment.

• Smart Structures and Systems
• /
• v.19 no.1
• /
• pp.11-20
• /
• 2017

For structural damage detection of shear buildings, this paper proposes a new concept using structural element mass-stiffness vector (SEMV) based on special mass and stiffness distribution characteristics. A corresponding damage identification method is developed combining the SEMV with the cross-model cross-mode (CMCM) model updating algorithm. For a shear building, a model is assumed at the beginning based on the building's distribution characteristics. The model is updated into two models corresponding to the healthy and damaged conditions, respectively, using the CMCM method according to the modal parameters of actual structure identified from the measured acceleration signals. Subsequently, the structural SEMV for each condition can be calculated from the updated model using the corresponding stiffness and mass correction factors, and then is utilized to form a new feature vector in which each element is calculated by dividing one element of SEMV in health condition by the corresponding element of SEMV in damage condition. Thus this vector can be viewed as a damage detection feature for its ability to identify the mass or stiffness variation between the healthy and damaged conditions. Finally, a numerical simulation and the laboratory experimental data from a test-bed structure at the Los Alamos National Laboratory were analyzed to verify the effectiveness and reliability of the proposed method. Both simulated and experimental results show that the proposed approach is able to detect the presence of structural mass and stiffness variation and to quantify the level of such changes.

• Research in Community and Public Health Nursing
• /
• v.30 no.1
• /
• pp.99-107
• /
• 2019

Purpose: This study aimed to assess hand hygiene (HH) compliance among visitors at a long-term care hospital in South Korea. Methods: The study was conducted at a 502-bed long-term care hospital located in Gyeonggi-do Province. From July 1 to August 15, 2017, including more than 6 weekends and one holiday, a trained observer covertly assessed visitors' HH at all five units (360 beds in total) of the study hospital building until the completion of 1,000 HH opportunities (i.e., 200 opportunities per unit). The modified World Health Organization (WHO) HH observation form was used. Instead of professional categories and the "before clean/aseptic procedure" moment, the estimated age range for each visitor were recorded in four categories: children (<14 years old), adolescents (14~18), adults (19~64), and the elderly (${\geq}65$). The collected data were analyzed using SPSS 22.0. Results: A total of 1,000 HH opportunities were observed from 766 visitors (an average of 1.31 per visitor) and the overall HH compliance rate was 20.3%. Overall, 53.7% of the HH cases were performed with soap and water. Among the 4 HH moments, the "after body fluid exposure risk" moment showed the highest compliance rate (83.5%); 93.9% used soap and water. The most commonly exposed potential body fluid among visitors was saliva (48.1%). Conclusion: For hospital visitors in long-term care hospitals, HH education programs including HH moments need to be developed and implemented. Further studies are necessary to evaluate visitors' HH compliance in various hospital settings and find the related variables influencing visitors' HH.

• Physical Therapy Rehabilitation Science
• /
• v.8 no.3
• /
• pp.134-140
• /
• 2019

Objective: The purpose of this study was to investigate the effect of exercise therapy and bedside ergometer exercise on muscle strength, function level, and quality of life of persons in intensive care. Design: Randomized Controlled Trial Methods: Sixteen patients in the ICU were randomly assigned to either the exercise group (n=8) or the bedside cycle ergometer group (n=8). Activities in the ICU exercise group (rolling, sitting at the edge of the bed, transfer from sitting to standing, standing balance training, ambulation) and bedside cycle ergometer group were performed 5 times a week for 30 minutes during the ICU admission period. Medical Research Council (MRC) and Functional Status Scale-Intensive Care Unit (FSS-ICU) parameters were assessed at the time of admission to the ICU, and reevaluation was assessed on the day of ICU discharge. The Short Form-36 (SF-36) was assessed at the time of discharge from the ICU. Results: MRC and FSS-ICU were significantly increased before and after intervention in both the experimental and control groups (p<0.05). There was a significant difference between MRC and FSS-ICU in the comparison of the changes before and after the intervention (p<0.05). SF-36 was compared between groups after intervention and there was a significant difference between the experimental and the control group (p<0.05). Conclusions: Muscle strength and functional levels improved after intervention in both the experimental and control groups. The ICU exercise group was more effective than the bedside cycle ergometer group to improve muscle strength, functional level, and quality of life performance of persons in the ICU.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.33-40
• /
• 2019

FDM 3D printers have become widespread, and investment in the 3D printer industry is increasing. Therefore, many 3D printers are released and the functions of products are emphasized. However, to lower unit prices, open-type 3D printers are sold in kit form, and their performance is very low. If the 3D printer has many heat sources and is sealed, there is the possibility that the main accessories (the main board, power supply, and motor) will be damaged by trapped heat. At the same time, if the ambient temperature is low due to the properties of the material, the output quality deteriorates. In this study, we analyzed the temperature rise of the main accessories and the quality of the output by the heat bed when a chamber was added to an open-type 3D printer. We also compared the quality of the output due to the air flow with the temperature rise of the main accessories. Moreover, we found the optimal value. As a result of the quality analysis, it was finally confirmed that the case with the chamber at $95^{\circ}C$ was the best for the printing condition. In addition, in the absence of the chamber, the bending of the specimen was found to be large, and in the case of the chamber, the degree of bending was slightly decreased by 0.05 mm.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.133-142
• /
• 2018

Increasing localized torrential rainfall caused by abnormal climate are making higher damage to human and property through urban inundation So The need of preventive measures is being highlighted. In this study, the methodology for calculating flood depth in domestic water map using an interpolation method in order to utilizing the results of flood analysis provided only in the form of a report is suggested. In the Incheon Metropolitan City S area as the test-bed, the flood depth was calculated using the interpolating the actual flood analysis by image and verification was performed. Verification results showed that the error rate was 5.2% for the maximum flooding depth, and that the water depth value was compared to 10 random points, which showed a difference of less than 0.030 m. Also, as the results of the flood analysis were presented in various ways, the flood depth was extracted from the image of the result of the flood analysis, which changed the presentation method, and then compared and analyzed. The results of this study could be available for the use of basic data from the research on the urban penetration of domestic consumption and for decision-making of policy.

• Journal of English Language & Literature
• /
• v.57 no.2
• /
• pp.191-215
• /
• 2011

This paper aims at investigating Dorothy Wordsworth's later conversation poetry, which has not been the focus of critical discussions on her literary works. While many critics have been emphasizing Dorothy Wordsworth's journals and the tendency of self-effacement in her prose, this paper argues that her later poetry often reveals acute self-consciousness about the circumstances that condition this self-annihilation and searches for a creative way to endorse her own identity. In "Lines Intended for My Niece's Album," she expresses anxiety and uncertainty about the inclusion of her poetic piece in Dora Wordsworth's album, which contains poems by prominent male writers of the contemporary period. "Irregular Verses" presents Dorothy Wordsworth's self-conscious narrative of her girlhood and shows how her own ambition to become a "Poet" has been stifled by external circumstances, including the ideology that instills the idea of proper womanhood into aspiring girls. While these poems examine contemporary gender discourse and the frustrated poethood resulting from it, other poems activate conversations with William Wordsworth's poems and thereby provide a revisionary re-writing of her brother's texts. For example, in "Lines Addressed to Joanna H." Dorothy Wordsworth becomes "a woman addressed who herself addresses others." Her scrupulous approach to her own addressee refuses to subordinate the other to the self's will, and through this revision of "Tintern Abbey," Dorothy Wordsworth vicariously liberates her own self confined in her brother's poems. "Thoughts on My Sick-Bed," which echoes "Tintern Abbey" through borrowed phrases and direct address to William Wordsworth, foregrounds her own poetic identity in the form of the first-person pronoun "I." Dorothy Wordsworth's continual illness during this period of her life paradoxically allows her the time for personal reflection formerly denied to her in her busy life constantly occupied by physical and spiritual labor for others. Instead of earning satisfaction from the subsumption of her creative energy under William Wordsworth's poetical endeavor, Dorothy Wordsworth finally starts to affirm her own poetic identity that can properly express her inner vision and artistic talent. Although this final affirmation remains largely incomplete due to her later mental collapse bordering on madness, it powerfully conveys the hidden literary aspiration of the formerly frustrated female poet.