• Journal of the Korean Applied Science and Technology
• /
• v.37 no.4
• /
• pp.723-732
• /
• 2020

The spent RHDS (Residue HydroDeSulfurization) catalyst is deactivated mainly by deposition of various contaminants such as coke, sulfur and vanadium on the surface of catalyst. To eliminate those contaminants, the following remanufacturing process was conducted. The first, heavy oil on the surface of the spent RHDS catalyst was removed by kerosene and dehydrated. The second, the high temperature incineration was carried out to eliminate coke and sulfur components deposited on the surface of spent RHDS catalyst. The third, the excessive quantity of Vanadium deposited on the surface of catalyst was removed by leaching process as follows: ultrasonic agitation was carried out at 50℃, for 10 seconds with 0.5% and 1% oxalic acid solution. The purpose of this process is to find out regenerated RHDS catalyst can be used as SCR catalyst for NOx reduction by controlling the vanadium residual content of the regenerated RHDS catalyst through leaching process. The composition of regenerated RHDS catalyst was analyzed by XRF and the NOx reduction efficiency was also measured by continuous catalytic fixed bed reactor. As the result, regenerated catalyst, with 0.5% oxalic acid, ultrasonic agitation in 10 seconds, showed the most stable NOx reduction efficiency. Also, in comparison with commercial SCR catalyst, the NOx reduction performance of regenerated catalyst was similar to that of commercial SCR catalyst at the temperature 375℃ and higher whereas was lower than commercial SCR catalyst at the temperature range between 200~250℃. Therefore, it was confirmed that the regenerated catalyst as powder form wash coated on the surface of metal corrugated substrate can be used for commercial SCR catalyst.

• Clinical and Experimental Pediatrics
• /
• v.46 no.12
• /
• pp.1274-1278
• /
• 2003

Syncope in children and adolescents have a common occurrence according for up to 15% before adulthood. Micturition syncope, a kind of situational syncope, can be considered a form of reflex syncope. It can typically occur in healthy young men after rising from bed in the early morning who experience sudden loss of consciousness during or immediately after urination. The mechanism of micturition syncope is not completely understood, but it has been suggested that vasovagal reflex mediated bradycardia and peripheral vasodilation and decreased venous return due to Valsalva effect and standing position lead to the decrease in cerebral blood flow resulting in syncope. The causes of syncope are variable. So complete history taking, physical examination, electrocardiography, exercise stress test, echocardiography, head-up tilt table test, electroencephalography(EEG), brain magnetic resonance image and urodynamic study should be required for the diagnosis of micturition syncope. There were several reports about micturition syncope. However, literature of micturition syncope at the pediatric age has rarely been reported in Korea so far. Therefore, we report a case of a 9-year-old boy with micturition syncope with typical EEG findings of high amplitude delta wave and flattening during syncope.

• Journal of Periodontal and Implant Science
• /
• v.50 no.2
• /
• pp.106-120
• /
• 2020

Purpose: A new form of porous polyethylene, characterized by higher porosity and pore interconnectivity, was developed for use as a tissue-integrated implant. This study evaluated the effectiveness of porous polyethylene blocks used as an onlay bone graft in rabbit mandible in terms of tissue reaction, bone ingrowth, fibrovascularization, and graft-bone interfacial integrity. Methods: Twelve New Zealand white rabbits were randomized into 3 treatment groups according to the study period (4, 12, or 24 weeks). Cylindrical specimens measuring 5 mm in diameter and 4.5 mm in thickness were placed directly on the body of the mandible without bone bed decortication, fixed in place with a titanium screw, and covered with a collagen membrane. Histologic and histomorphometric analyses were done using hematoxylin and eosin-stained bone slices. Interfacial shear strength was tested to quantify graft-bone interfacial integrity. Results: The porous polyethylene graft was observed to integrate with the mandibular bone and exhibited tissue-bridge connections. At all postoperative time points, it was noted that the host tissues had grown deep into the pores of the porous polyethylene in the direction from the interface to the center of the graft. Both fibrovascular tissue and bone were found within the pores, but most bone ingrowth was observed at the graft-mandibular bone interface. Bone ingrowth depth and interfacial shear strength were in the range of 2.76-3.89 mm and 1.11-1.43 MPa, respectively. No significant differences among post-implantation time points were found for tissue ingrowth percentage and interfacial shear strength (P>0.05). Conclusions: Within the limits of the study, the present study revealed that the new porous polyethylene did not provoke any adverse systemic reactions. The material promoted fibrovascularization and displayed osteoconductive and osteogenic properties within and outside the contact interface. Stable interfacial integration between the graft and bone also took place.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.53-63
• /
• 1992

M/BM -series catalysts, $MoO_3$ supported on ${\alpha}-Bi_2Mo_3O_{12}$ were also prepared by impregnation method. BM/M-series catalysts, ${\alpha}-Bi_2Mo_3O_{12}$ supported on $MoO_3$ were also prepared by coprecipitation. Structure and catalytic properties of the two phase catalysts were studied by means of using nitrogen adsorption, X-ray diffraction, and scanning electron microscopy. The reaction test for the selective oxidation of propylene to acrolein over Bi-molybdate catalysts was studied using a fixed-bed reactor system. In M/BM-series catalysts, $MoO_3$ was dispersed on ${\alpha}-Bi_2Mo_3O_{12}$, and the crystal structure of ${\alpha}-Bi_2Mo_3O_{12}$ remains unchanged by the presence of excess $MoO_3$. However the surface morphology and bulk structure of BM/M-series catalysts were altered probably because the precipitated $Bi(OH)_3$ reacted with $MoO_3$ during the calcination to form ${\alpha}-Bi_2Mo_3O_{12}$ phase. The results of propylene oxidation on both series catalysts showed that the reaction took place over the surface of ${\alpha}-Bi_2Mo_3O_{12}$ particle and the role of excess $MoO_3$ was to supply oxygen to ${\alpha}-Bi_2Mo_3O_{12}$. These increasing effects on activity were also observed in the mechanical mixtures of ${\alpha}-Bi_2Mo_3O_{12}$ and $MoO_3$.

• Journal of the Korean Institute of Navigation
• /
• v.19 no.2
• /
• pp.77-97
• /
• 1995

The protection of the marine environment is one of the main international legal problems in recent years. In parallel with the industrial development, a great quantity of chemical materials were used and in consequence, mass transportation of oil and other dangerous materials was required on the one hand, and discharge of industrial wasters drew also the attention on the other hand. Furthermore, oil tankers accidents, mass use of nuclear materials, sea-bed exploration and exploitation stimulated further deep human concern on the marine environment. The expansion of international concern to new and more dangerous sources of marine pollution regarded more strict and legal control on the Oil Tanker(DWT 95, 000tons, Cb=0.805) model. Calculation results are compared to the international, especially regional level. In particular, this study is concerned with the preservation of the Northeast Asian Seas surrounded by Japan, the Russian Far East, South Korea, North Korea, China and Taiwan. These adjacent countries must intensify cooperation regarding the prevention, reduction and control of the contamination of the sea. And this cooperation between the States concerned should, as much as possible, be aimed at maximizing the effectiveness of measures to prevent or abate transboundary environmental pollution. To achieve this purpose, States concerned should be imposed upon duties such as duty to assess the environmental impact, duty to inform, duty to consult and duty to assist on the basis of general principle of international law, international customary law and other various resolutions of international bodies. Depending on the nature and extent of actual or potential transboundary pollution with the use of a natural resource or the environment in general the establishment of some form of institutionalized cooperation between the States concerned may become useful or indispensable. The functions of this Organization are, inter alia, to keep the implementation of the Convention and the protocals under continuous observation, to make recommendations on regional or sub-regional rules and standards to be elaborated and on measures to be taken by the Contracting Parties, to be notified of any grave and imminent danger from pollution or threat of pollution by the Contracting Parties and to promote in close cooperation with appropriate governmental bodies additional measures to protect the marine environment of the Northeast Asian Seas, and so on. Above mentioned countries, first of all, are located within the Northeast Asian Seas geographically and, therefore, take responsibilities of preserving the clean sea against marine interferences regardless of any difference of the social, political and economic systems. They must be followed under the UNCLOS and other marine conventions. Under the present circumstances, Northeast Asian Seas will become dead seas in case that there is no instant and prompt action against pollution. Hence we have an absolute obligation to promote the development of the mandatory international environmental law, which in turn can faciliate more effective implementation of the regional cooperation by the neighbouring states within this area.

• Journal of Korea Water Resources Association
• /
• v.41 no.8
• /
• pp.761-772
• /
• 2008

The object of this study is to develop the model that solves the numerically difficult problems in hydraulic engineering and to demonstrate the applicability of this model by means of various test examples, such as, verification in the gradually varied unsteady condition, three steady flow problems with the change of bottom slope with exact solution, and frictional bed with analytical solution. The governing equation of this model is the integral form of the Saint-Venant equation satisfying the conservation laws, and finite volume method with the Riemann solver is used. The evaluation of the mass and momentum flux with the HLL Riemann approximate solver is executed. MUSCL-Hancock scheme is used to achieve the second order accuracy in space and time. This study introduce the new and simple technique to discretize the source terms of gravity and hydrostatic pressure force due to longitudinal width variation for the balance of quantity between nonlinear flux and source terms. The results show that the developed model's implementation is accurate, robust and highly stable in various flow conditions with source terms, and this model is reliable for one-dimensional applications in hydraulic engineering.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.2
• /
• pp.107-114
• /
• 2009

In present study, an alternative process for manufacturing ultra marine blue by using kaolin, sulfur, sodium carbonate, silica, and rosin was investigated. From the experiments, it was found in the reductive calcination process that the temperature variation with the bed height of input materials is relatively high due to the inadequate thermal conductivity of them. It was also found that the color of the ultramarine blue manufactured is sensitive for the shape of the input materials and the calcinations conditions, and specially the heating rate is very important to form ultramarine. For manufacturing green ultramarine by using sulfur, sodium carbonate, silicon, and pine resin, an optimum condition was investigated to be the heating rate region below $0.6^{\circ}C/min$, the reaction temperature of $850^{\circ}C$ and the reaction time of 4 hr. At the oxidative calcination process to manufacture ultra marine blue from green ultramarine, the optimum flow rate of air is $500{\sim}550\;{\ell}/kg$ (green ultramarine) and the reaction temperature is $500{\sim}550^{\circ}C$.

• Korean Journal of Cognitive Science
• /
• v.27 no.3
• /
• pp.469-499
• /
• 2016

The present study investigated the cognitive mechanism underlying online processing of Korean syntactic (for example, A bed/a clock belongs to/doesn't belong to the furniture "침대는/시계는 가구에 속한다/속하지 않는다") and lexical negation (for example, A tiger/a butterfly has/doesn't have a tail "호랑이는/나비는 꼬리가 있다/없다") using an ERP(Event-related potentials) technique and a truth-value verification task. 23 Korean native speakers were employed for the whole experiment and 15's brain responses (out of 23) were recorded for the ERP analysis. The behavioral results (i.e. verification task scores) show that there is universal pattern of the accuracy and response time for verification process: True-Affirmative (high accuracy and short latency) > False-Affirmative > False-Negated > True-Negated. However, the components (early N400 & P600) reflecting the immediate processing of a negation operator were observed only in lexical negation. Moreover, the ERP patterns reflecting an effect of truth value were not identical: N400 effect was observed in the true condition compared to the false condition in the lexically negated sentences, whereas Positivity effect (like early P600) was observed in the false condition compared to the true condition in the syntactically negated sentences. In conclusion, the form and location of negation operator varied by languages and negation types influences the strategy and pattern of online negation processing, however, the final representation resulting from different computational processing of negation appears to be language universal and is not directly affected by negation types.

• Ocean and Polar Research
• /
• v.39 no.2
• /
• pp.85-106
• /
• 2017

The Lago Sofia conglomerate in southern Chile is a deep-marine gravelly deposit, which is hundreds of meters thick and kilometers wide and extends laterally for more than 100 km, filling the foredeep trough of the Cretaceous Magallanes Basin. For understanding the depositional processes and environments of this gigantic deep-sea conglomerate, detailed analyses on sedimentary facies, architecture and paleoflow patterns were carried out, highlighting the differences between the northern (Lago Pehoe and Lago Goic areas) and southern (Lago Sofia area) parts of the study area. The conglomerate bodies in the northern part occur as relatively thin (< 100 m thick), multiple units intervened by thick mudstone-dominated sequences. They show paleoflows toward ENE and S to SW, displaying a converging drainage pattern. In the southern part, the conglomerate bodies are vertically interconnected and form a thick (> 400 m thick) conglomerate sequence with rare intervening fine-grained deposits. Paleoflows are toward SW. The north-to-south variations are also distinct in sedimentary facies. The conglomerate bodies in the southern part are mainly composed of clast-supported conglomerate with sandy matrix, which is interpreted to be deposited from highly concentrated bedload layers under turbidity currents. Those in the northern part are dominated by matrix- to clast-supported conglomerate with muddy matrix, which is interpreted as the products of composite mass flows comprising a turbidity current, a gravelly hyperconcentrated flow and a mud-rich debris flow. All these characteristics suggest that the Lago Sofia conglomerate was formed in centripetally converging submarine channels, not in centrifugally diverging channels of submarine fans. The tributaries in the north were dominated by mass flows, probably affected by channel-bank failures or basin-marginal slope instability processes. In contrast, the trunk channel in the south was mostly filled by tractive processes, which resulted in the vertical and lateral accretion of gravel bars, deposition of gravel dunes and filling of scours and channels, similar to deposits of terrestrial gravel-bed rivers. The trunk channel developed along the axis of foredeep trough and its confinement within the trough is probably responsible for the thick, interconnected channel fills. The large-scale architecture of the trunk-channel fills shows an eastward offset stacking pattern, suggesting that the channel migrated eastwards most likely due to the uplift of the Andean Cordillera.

• Explosives and Blasting
• /
• v.18 no.2
• /
• pp.7-13
• /
• 2000

Abstract The characteristics of bed rock in the study area was classified by means of the crack coefficient estimated from the seismic velocities of in-situ and intact rocks. Various statistical methods were investigated in order to minimize the possible errors in estimating the predictive equation of blasting vibration and to enhance the determination coefficient $R^2$, for more reliable estimation. The determination coefficient showed the highest in the analysis for those groups using weighting function with the number of samples. The analysis for the weighting function employed with standard coefficient and variance also enhanced the determination coefficients significantly compared to the others, but the reliability was slightly lower than results obtained former method. Therefore the most reliable predictive equation of blasting vibration was found to be obtained from a regression analysis of the mean vibration level using the weighting of same distance groups within 15m with the same explosive charge weight per delay. The coefficients, K and n 317.4 and -1.66, respectively, when using the square root scaling, and 209.9 and -1.66, respectively, when using the cube root scaling. The analysis also showed that the square root scaling may be used in the distance less than 31m form the blast source, and the cube root scaling in the distance more than 31m for safe design.