• Title/Summary/Keyword: bed form

Search Result 265, Processing Time 0.024 seconds

The influence of sea surface temperature for vertical extreme wind shear change and its relation to the atmospheric stability at coastal area

  • Geonhwa Ryu;Young-Gon Kim;Dongjin Kim;Sang-Man Kim;Min Je Kim;Wonbae Jeon;Chae-Joo Moon
    • Wind and Structures
    • /
    • v.36 no.3
    • /
    • pp.201-213
    • /
    • 2023
  • In this study, the effect of sea surface temperature (SST) on the distribution of vertical wind speed in the atmospheric boundary layer of coastal areas was analyzed. In general, coastal areas are known to be more susceptible to various meteorological factors than inland areas due to interannual changes in sea surface temperature. Therefore, the purpose of this study is to analyze the relationship between sea surface temperature (ERA5) and wind resource data based on the meteorological mast of Høvsøre, the test bed area of the onshore wind farm in the coastal area of Denmark. In addition, the possibility of coastal disasters caused by abnormal vertical wind shear due to changes in sea surface temperature was also analyzed. According to the analysis of the correlation between the wind resource data at met mast and the sea surface temperature by ERA5, the wind speed from the sea and the vertical wind shear are stronger than from the inland, and are vulnerable to seasonal sea surface temperature fluctuations. In particular, the abnormal vertical wind shear, in which only the lower wind speed was strengthened and appeared in the form of a nose, mainly appeared in winter when the atmosphere was near-neutral or stable, and all occurred when the wind blows from the sea. This phenomenon usually occurred when there was a sudden change in sea surface temperature within a short period of time.

Appropriate Drainage Position in Coir Bag Culture Using U-type Bed (U자형 베드에서 코이어 자루재배 시 적정 배액구 위치 구명)

  • Lee, Mun Haeng;Lee, Hee Keyung;Kim, Sung Eun;Lee, Hwan Gu;Lee, Sun Gye;Park, Guen Se;Chae, Young;Kim, Young Shik
    • Journal of Bio-Environment Control
    • /
    • v.22 no.4
    • /
    • pp.408-412
    • /
    • 2013
  • This study was carried out to investigate damp injury caused by tomato coir bag culture and prevent that. The tomato variety was used 'Minichal', and tomatoes were grown in greenhouse. The nutrient solution based on Yamazaki Tomato Standard Solution was irrigated from one hour after sunrise to two hour before sunset. The slits for darainage were made in three types; I, L, and bottom slit type. The coir bag of I and L type had six slits of 15cm length, that of bottom slit type had three slits of 15 cm length. The weight of coir bag in 24 hours after saturation was 14.2 kg in I type, 13.8 kg in L type, and 12.8 kg in bottom slit type, but there was not significant difference. The weight of coir bag after one day irrigation was 14.5 kg, 14.2 kg, and 13.3 kg at L, I, and bottm slit type, respectively. This means that the moisture content of coir bag during cultivation was lowest in bottom slit type. The number of adventitious root on stem was 160, 170, and 53 at I, L, and bottom slit type, respectively. The dry weight of root and root length were highest at bottom slit type, compared to other treatment. The marketable yield was highest 26.5 kg/20 plant in bottom slit type. For increasing yield and preventing damp injury, bottom slit type was most effective at U type bed coir bag culture.

The Yongsan Governor General Official Residence in Korean Landscape Architectural History (용산 총독관저 정원의 조경사적 의의)

  • Kim, Hai-Gyoung;Yu, Joo-Eun
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.29 no.2
    • /
    • pp.118-129
    • /
    • 2011
  • This study is about the governor general's official residence and its garden in Yongsan that were constructed during the Japanese occupational time. The garden design drawing was also made while planning such Neo-Baroque style building, and it contains particular information of the garden unlike the other existing landscape drawings. The content of garden translated and landscape historical value drawn out by analysis of garden drawings, press articles and literatures are as follows; First, such governor general's official residence garden in Yongsan is likely to be the Korean first western style landscape form. For, from the point that it was completely constructed together with such official residential building in 1909, its construction time should be before that of the garden of Seokjojeon, Deoksu Palace, which was constructed in 1911. Second, it shows the garden style and garden planting factors introduced together with the modern architecture then. Such garden planting factors are placed from the center axis of the garden that is connected to the center of the building and monument as well. Such style and factors cover and show the flower bed appearing in Baroque style gardens, the monument that forms Vista playing the center of audience's vision, water space that is placed symmetrically against the axis, planting pattern that emphasizes the plants' space, flower bed shape and axis, and what kinds of plants were introduced then. Third, it shows the using pattern of western style gardens. Western style garden parties used to take in place in this garden while official dinner and reception were held in the evening in the official residence. Fourth, it shows the historical value as a modern landscape drawing, which is the Korean first landscape drawing that shows the plants' names and planting techniques marking the current height and planned height for change of topography and water system as a water landscape factor. That is, this drawing has the value that it was upgraded from the other existing ones that expressed only simple plants' symbols or flower bed shapes. I, therefore, hope that the studies on the modern landscape would be getting wider by excavation of new historical records in the future.

A Study on the Forming and the Transformations of Seokjojeon Garden in Deoksugung (덕수궁 석조전 정원의 조성과 변천)

  • Kim, Hai-Gyoung;Oh, Kyusung
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.33 no.3
    • /
    • pp.16-37
    • /
    • 2015
  • As a result of analyzing the forming and the transformations of Seokjojeon Hall garden by linking it to the changes of Deoksugung Palace influenced by the social atmosphere, the Seokjojeon garden can be classified into four phases. The first phase starts from 1896 to 1914. Gyeongungung was built in the late 19th century(1896-1897) as an official palace and Junghwajeon Hall and Seokjojeon Hall was built for Gojong. J.M.Brown was in charge of the construction of Seokjojeon in the beginning but H.W.Davidson saw the end also set up the garden. In the process of forming the garden the incorporating of Dondeokjeon Hall and the demolishing of the west wing corridors of Junghwajeon Hall occurred. At this phase of the garden a statue of an eagle was put up in the garden but was soon taken down. The shape of the garden was quiet simple with a central axial pathway, a round assorted flower bed placed in front of Seokjojeon Hall. The second phase starts from 1915 to 1932 which lasted for 17 years. At the last years of the Great Han Empire the duties of Gungnaebu(宮內府) was transferred to Leewangjik(李王職) in 1911 and a research on the existing buildings was done by Jujeonkwa(主殿課) in 1915. According to the research drawings, the garden still maintained the axial pathway formed in the previous phase but the garden had an asymmetric form. The flower bed was formed in a round shape and an open-knot technique and boundary plantation was applied to the garden. The third phase starts from 1933 to 1937 and is the period when Seokjojeon Hall was made public. By the year of 1932 many buildings of Deoksugung Palace had been demolished in the preparation of the opening of Seokjojeon Hall as a permanent exhibition hall. The central axial pathway still remained in the new garden and added a pond with a turtle statue in the center. The fourth phase starts from 1938 until the liberation from Japan and is the period when Deoksugung Palace became a park. Yi Royal-Family Museum was built and linked to Seokjojeon Hall with a bridge and the garden transformed into a sunken garden. The garden adopted a fountain and a pagora. Despite the minor changes in the after years the garden still posses most of its form from the fourth phase. As we can see the current garden of Seokjojeon Hall is not the same as the initial garden and therefor the importance of this study lies in the fact that modifications to the statements regarding to Seokjojeon Hall garden should be made.

Selection of Cultivars with Vigorous Growth Habit for Street Tree, Dwarf Tree Form for Pot Plants, and Spreading Branches for Groundcovers in the Recently Developed Cultivars of Rose of Sharon (Hibiscus spp.) for Landscape Uses (나라꽃 무궁화 품종중 가로수용, 분화용 및 지피용으로 조경적 활용도가 높은 품종 선정)

  • Kang, Ho-Chul;Kim, Dong-Yeob;Ha, Yoo-Mi
    • Journal of the Korean Institute of Traditional Landscape Architecture
    • /
    • v.34 no.2
    • /
    • pp.87-99
    • /
    • 2016
  • This study was carried out to characterize 127 recently developed cultivars of Rose of Sharon (Hibiscus spp.) in Korea and foreign Countries for landscape uses. The examined factors were growth characteristics such as tree height of a 1-year grafted plant(cm), plant type, growth habit, leaf characteristics such as shape and size, flower characteristics such as color, shape, size, and red eye during 2014 and 2015 for landscape uses. The results are obtained as follows; Hibiscus hybrid 'Daewangchun', 'Daeil', 'Lohengrin', 'Yeonam', 'Joomong', 'Jina', and H. syriacus 'Honggarosu' had vigorous shoot growth and tall tree size of 100cm. New Hibiscus cultivars, Hibiscus hybrid 'Daewangchun' and 'Daeil', having vigorous growth, uniform plant habit, upright, and compact branches were developed through interspecific crosses between H. syriacus 'Samchully' (♀) and H. sinosyriacus 'Seobong' (♂). This newly developed cultivar 'Daewangchun', 'Daeil', 'Lohengrin', 'Yeonam', 'Joomong', 'Jina', and H. syriacus 'Honggarosu' having tall vigorous growth d unique flower with long red eye can be used as street tree or specimen plant in landscape. Otherwise, H. syriacus 'Tamla', 'Melrose', 'Bidan', 'Hi Lea', 'Byeollee', 'Byunghwa', 'Mibak', 'Hanyang', 'Chungam', 'Lil Kim Violet', 'Jongmoo', 'Eunhasu', Hibiscus hybrid 'Saehanseo', and Hibiscus hybrid 'Yousoon' were selected as small tree of 30~39cm. They had dwarf form in tree seemed to be suitable for pot or flower bed planting on both indoor and outdoor conditions. H. syriacus 'Antong', 'Chungjo', and 'Lil Kim' were less than 30 cm of tree size. H. syriacus 'Antong', 'Chungjo', and 'Lil Kim', characterized by its compact, upright and outwardly spreading plant habit; freely branching habit; dark green-colored leaves; good garden performance. Therefore, the new cultivars with tall and small tree size were a promising cultivar as a ground covers or pot planting as woody landscape plant.

A Studyon the Movment of Ground Water of Banayweol Formation (반야월층(半夜月層)의 지하수운동(地下水運動)에 관(關)한 연구(硏究))

  • Kim, Yong Ki
    • Economic and Environmental Geology
    • /
    • v.9 no.4
    • /
    • pp.225-240
    • /
    • 1976
  • This study deals with the flow of bed rock ground water of Banyaweol Formation, which is presently cleared up as a laminar flow. The result obtained may be summarized as the following. 1) The Banyaweol Formation consists mainly of thin-bedded, green to blackish green shale, mudstone, and marl. The marl and mudstone alternatively occur with shale. The marl and mudstone form a aquifer of Banyaweol Formation. In this study, a group of aquifer is in convenience named as a aquifer zone. The aquifer occurs in lenticular form. The aquifer seems to be a type of artesian aquifer because it is covered with aquicludes, but it actually forms a unconfined aquifer because its piezometric surface stays under the lower aquiclude. The lowering of piezometric level is formed because of leakage of the ground water to the lower aquifer undersaturated. 2) The coefficient of permeability of Banyaweol Formation's ground water body (K) is derived by using Dupuit's equation as the following ${\log}K=\frac{CK^2-dK+f}{aK-b}\;\(M=1.365(2H-s)s\\M={\log}1.956s{\sqrt{H}}r\)$ here, $$a=\sum_{1}M_iG_i$$ $$b={\frac{1}{2}log{\sum_{i}}Q_i{^2}$$ $$c=2{\sum_{i}}M_i{^2}$$ $$d=loge{\sum_{i}}M_{i}Q_{i}+2{{\sum_{i}}N_{i}Q_{i}$$ $$f=loge{\sum_{i}}Q_i{^2}N_i$$ If the measured values substituted for the above equation, the coefficient of permeability of the aquifer is 4.1m/day. The coefficient of storge of the aquifer is $2.8{\times}10^{-4}$ if the measured values substituted for Theis's equation. Using the above constants, the filtration velocity of the aquifer is $2.1{\times}1O^{-1}m/day$and the daily flow quantity of the ground water is $847.38m^{3}/day$. 3) In order to understand the time necessary for a circulation of ground water body, the contents of tritum contained in the ground water are measured as 2.3 T.U. at the Korea Atomic Energy Research Institute. Before 1952, the average concentration of tritium per year in groundwater was reported as 10T. u., taking it as the standard, the groundwater of the present study 26.25 years old. Therofore, the groundwater of the Banyaweol Formation is judged as an relatively old groundwater. It is characteristic that the ground water of Banyawol Formation is laminar flow as well as unconfined aquifer and ground water flow of relatively long time. 4) The nature, means of flow, and circulation of Banyaweol Formation's ground water body make it possible set up this ground water body as a ground water system.

  • PDF

A Study on Relationship between Point Load Strength Index and Abrasion Rate of Sediment Particle (퇴적물 입자의 점하중강도지수와 마식율의 관계에 대한 연구)

  • Kim, Jong-Yeon
    • Journal of the Korean Geographical Society
    • /
    • v.43 no.6
    • /
    • pp.808-823
    • /
    • 2008
  • Sediment abrasion in rivers is caused by the interaction between bedrock channel bed and sediment particles transported through the river. Abrasion rate of sediment particles in rivers is controlled by two major factors; Sediment transport conditions including hydraulic conditions form the erosive forces and physical and chemical strengths of the particles form a resistance force against abrasion and other erosional processes. Physical experiments were performed to find the role of each variable on sediment abrasion process. Total 266 sediment particles were used in this experiment. All sediment particles were divided into 11 independent sediment groups with sediment particle size and sediment loads. Each sediment groups were abraded in tumbling mill for up to 8 hours. Changes in weight were recorded by run and total: 2,128 cases of abrasion rate were recoded. Physical strength of rock particles was measured with point load strength index. It is found that sediment abrasion rate has a negative functional relationship point load strength index ($I_{a(50)}$) ($R^2=0.22$). It was suggested that physical strength of sediment particles set the "maximum possible abrasion rate'. As sediment flux increases, abrasion rates of sediment particles with similar point load strength index were changed. It could be concluded that not only physical characteristics of sediment particles, but also sediment transport conditions control sediment abrasion rates.

Improvement of Removal Characteristics of Uranium by the Immobilization of Diphosil Powder onto Alginate Bed (다이포실 분말수지의 비드화에 의한 우라늄 제거특성 개선)

  • Kim Kil-Jeong;Shon Jong-Sik;Hong Kwon-Pyo
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.4 no.2
    • /
    • pp.133-138
    • /
    • 2006
  • Chemical wastes containing small amounts of uranium can not be disposed of them after treatment as an industrial waste, because the uranium concentration in the final dry cake exceeds the exemption level. Especially for the removal of uranium in this study, the method for immobilizing Diphosil powder within alginate beads is adopted to make a bead form from a powdered resin. Sodium alginate bead itself showed a capability to uptake uranium to above 60%, but the value was decreased to below 30% after equilibrium. The adsorption rate of uranium increased with the increasing content of Diphosil in the sodium alginate bead. Diphosil resin itself showed very fast uptake of uranium from early stages, and then the rates were leveled off. Diphosil bead showed an improved capability to uptake uranium considering the pure Diphosil content in the composite bead, and provide a considerable potential for further applications of a continuous process by using Diphosil as a bead form.

  • PDF

Reassessment of Validity and Reliability of the Tools for Measuring Yangseng -Focused on the Elderly People in Jeonbuk Area- (양생측정도구의 타당도와 신뢰도 재검증 -전북지역 노인을 중심으로-)

  • Jung, Hae-Kyoung;Kwon, So-Hee;Kim, Ae-Jung;Wang, Myoung-Ja;Lee, Ki-Nam
    • Journal of Society of Preventive Korean Medicine
    • /
    • v.9 no.1
    • /
    • pp.17-36
    • /
    • 2005
  • The objective of this study is to present basic data for producing tools to measure Yangseng of the elderly aged older than 65 by reassessing the validity and reliability of such tools already developed. In the present study, total 855 subjects were divided into 4 groups and given 31 question for the ultimate factor analysis of each item. The results cloud be summarized as follows: 1. In case of 'don't have sex in drunken state or right after dinner'(the 31st item of sex live yangseng). factor loading came out proportionally in 3 factors such as factor 4=0.358, factor 5=0.389 and factor 6=0.386. As they all failed to reach the general standard of 0.5 or more and even the minimum standard of 0.4 or more, the 31st item was deleted from the questionnaires. 2. From the factor analysis after exclusion of the 31st item, factor loading of the 25th item of sleep yangseng 'go to bed and get up regularly' appeared to be proportional in 2 factor(factor 4=0.393 and factor 7=0.373). Since it was shown that the 25th item could not be classified into a category but interacted with others in common and didn't satisfy the minimum standard of 0.4, it was deleted form the questionnaires, too. 3. From the factor analysis conducted after excluding the item numbers 31 and 25, factor loading of the 12th item of diet yangseng 'do not eat much' turned out to be relatively high with such values as factor 5=0.518 and factor 3=0.453. As it was, however, tied up with the factor of exercise yangseng, it was also deleted. In conclusion, 28 items after excluding the item numbers 12, 25 and 31 form 4 group showed the same results as divided into 8 factor with high grade of reliability and validity, evidencing the assumption that they can be employed practically to measure yangseng of the elderly aged 65 and oder.

  • PDF

Treatment of Spent ion-Exchange Resins from NPP by Supercritical Water Oxidation(SCWO) Process (초임계수 산화공정에 의한 원전 폐수지 처리기술)

  • Kim, Kyeong-Sook;Son, Soon-Hwan;Song, Kyu-Min;Han, Joo-Hee;Han, Kee-Do;Do, Seung-Hoe
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.7 no.3
    • /
    • pp.175-182
    • /
    • 2009
  • The spent cationic exchange resins and anionic exchange resins were separated from mixed spent exchange resins by a fluidized bed gravimetric separator. The separated resins were identified by an elemental analysis and thermogravimetric analysis. The each test sample was prepared by diluting the slurry made by wet ball milling the cationic exchange resins and the anionic exchange resins separated as a spherical granular form for 24 hours. The resulting test samples showed a slurry form of less than $75{\mu}m$ of particle size and 25,000ppm of $COD_{cr}$. The decomposition conditions of each test samples from a thermal power plant were obtained with a lab-scale(reactor volume : 220mL) supercritical water oxidation(SCWO) facility. Then pilot plant(reactor volume : 24 L) tests were performed with the test samples from a thermal power plant and a nuclear power plant successively. Based on the optimal decomposition conditions and the operation experiences by lab-scale facility and the pilot plant, a commercial plant(capacity : 150kg/h) can be installed in a nuclear power plant was designed.

  • PDF