• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.777-782
• /
• 2017

The Signal Intelligence (SIGINT) system based on the adaptive beamformer, comprised of the AOA estimator followed by the interference canceller, is a cutting edge technology for collecting various signal information utilizing all sorts of devices such as the radar and satellite. In this paper, we present the efficient adaptive SIGINT structure consisted of an AOA estimator and an adaptive beamformer. For estimating AOA information of various signals, we employ the Multiple Signal Classification (MUSIC) algorithm and for efficiently suppressing high-power interference signals, we employ the Minimum Variance Distortionless Response (MVDR) algorithm. Also, we provide computer simulation examples to verify the performance of the presented adaptive beamformer structure.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.399-406
• /
• 2011

Adaptive beamformers, which utilize a priori information on the arrival angle of the desired signal. suppress interferences while maximizing their gains in the desired signal direction. However, if there exist errors in the direction information, they can suffer from severe performance degradation since the desired signal is treated as an interference. A robust adaptive beamforming method is presented which exploits the signal-blocking structure of the Duvall beamformer. The proposed method finds an interference signal space directly from correlations of received signals and then obtains a weight vector such that it is orthogonal to the space. Applying the weight vector to two sub arrays which consist of one less sensors than the original uniform lineal array (ULA), the beamformer efficiently estimates the arrival angle of the desired signal. Its computational complexity is lower than existing methods, which require matrix inversion or eigendecomposition.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.52-57
• /
• 2001

The passive ranging estimation techniques using a focused beamformer have been studied under the water. It is well known that the passive ranging estimation method using a focused beamformer is excellently evaluated. Among these, the passive ranging sonar is known to have a good performance under low signal-to-noise. ratio. However, its performance is degraded in multi-source environments. In this paper, we proposed the technique using dual focused beamformers to estimate the range. And when the sampling frequency is low, it is very difficult to steer the focused beam to the desired direction, as a result of this, the low performance occurs because of a distorted beam pattern. In this paper, we study the effect of sampling rate on passive ranging by using focused beamformer. And we verified the performance of the proposed method via computer simulation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.2
• /
• pp.151-159
• /
• 2022

In this paper, we implement a digital multi-beamformer using FPGA(Field Programmable Gate Array) which has advantages in parallel and real-time data processing. This is accomplished through the use of not only high-speed data communication but also multiple beam forming, which is currently required by MFR(Multi Function Radar). As a result, the beamformer can process 24 Gbps throughput in real-time and form 5 digital beams at the same time. It is also compared to the results of Matlab simulations. We demonstrate how an implemented beamformer can be used in an MFR system by using a digital array antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.424-434
• /
• 2015

Adaptive beamforming algorithms have been widely used to remove interference and jamming in the phased array radar system. Advances in the field programmable gate array(FPGA) technology now make possible the real time processing of adaptive beamforming (ABF) algorithm. In this paper, the FPGA based real-time implementation method of adaptive beamforming system(beamformer) in the pre-processor module for active electronically scanned array(AESA) radar is proposed. A compact FPGA-based adaptive beamformer is developed using commercial off the shelf(COTS) FPGA board with communication via OpenVPX(Virtual Path Cross-connect) backplane. This beamformer comprises a number of high speed complex processing including QR decomposition & back substitution for matrix inversion and complex vector/matrix calculations. The implemented result shows that the adaptive beamforming patterns through FPGA correspond with results of simulation through Matlab. And also confirms the possibility of application in AESA radar due to the real time processing of ABF algorithm through FPGA.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.386-389
• /
• 2004

Beamforming for underwater acoustic communication is affected by the broadband feature of underwater acoustic communication signal, which has the low center frequency compared to the signal bandwidth. In this paper, the baseband equivalent array signal model is derived and we present computer simulation results for the broadband finite impulse response (FIR) beamformer performance according to the FIR filter order and the tap spacing. If the FIR filter order is increased above the optimum value, the beamformer performance is degraded. Also the tap spacing is related to the optimum FIR filter order.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.1
• /
• pp.187-199
• /
• 2016

In this paper, we consider secure communications in multi-hop relaying systems, where multiple decode-and-forward (DF) relays are located at each individual hop and perform cooperative beamforming to improve physical layer security. In order to determine the cooperative relay beamformer at each hop, we propose an iterative beamformer update scheme using semidefinite relaxation and bisection techniques. Numerical results are presented to verify the secrecy rate performance of the proposed scheme.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.59-63
• /
• 2020

The antenna arrays are known to be effective for GPS anti-jamming and the performance can be improved further if a dual-polarized antenna array is used. However, when the Minimum Variance Distortionless Response (MVDR) beamformer is used as a signal processing algorithm for the dual-polarized antenna array, the anti-jamming performance can degrade in the presence of errors in the steering vector that is a key factor of the MVDR beamformer. Therefore, in this paper, the effect of the steering vector error on the anti-jamming performance of the dual-polarized antenna array is analyzed by simulations and the result is compared to that of the single-polarized antenna array.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.6
• /
• pp.446-452
• /
• 2004

Under the condition of a common narrowband target signal and interference signals from several directions, the linearly constrained minimum variance (LCMV) method using the generalized sidelobe canceller (GSC) for adaptive beamforming has been exploited successfully However, in the case of wideband signals, the length of the adaptive filter must be extended. As a result, the complexity of the beamformer increases, which makes real-time implementation difficult. In this paper, we improve the convergence characteristics of the adaptive filter using the transform domain normalized least mean square (NLMS) approach based on the subband GSC structure without the increase of complexity. Besides, the M-MAX algorithm, which is one of various selective coefficient updating methods, is employed in order to remarkably reduce the computational cost without decreasing the convergence quality. With the combination of these methods, we propose a computationally efficient wideband adaptive beamformer and verify its efficiency through a series of simulations.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2386-2388
• /
• 2005

As anti-crash and pre-crash systems in vehicles become more extensively used, the need for high performance short-range radars is playing an increasing role. This paper presents the design of a micromachined, ultra-wideband beamformer centered at 24 GHz for automotive short-range radar systems. This beamformer is a Butler matrix designed using ultra-wideband transmission-line couplers, which consist of a multilayered structure that exhibits wider bandwidth compared to conventional microstrip branch-line couplers. The circuit has been designed on a quartz substrate, and to achieve the desired coupling, lines suspended on BCB layers located at specific parts of the circuit were used, achieving a three metal layered structure in form of wide microstrips, that give low loss and a wideband response. In this paper the design and fabrication procedure of the proposed beamformer are fully described.