• 한국안전학회지
• /
• 제8권1호
• /
• pp.47-53
• /
• 1993

Residual Deformation Analysis(RDA) is a new method for ratings of the continuous bridges. The RDA makes it possible to expand the inelastic steel girder bridge design method set forth in the American Association of State Highway Officals'(AASHTO) Guide Specifications for Alternate Load Factor Design Procedures for Steel Beam Bridges Using Braced Compact Sections(1986) into an inelastic rating method. It is a method to assess the residual moments and deformations that are set up in a beam that has been loaded into the post-elastic range This method combines classical elastic conjugate beam theory with linear moment-rotation relationships for midspan inelastic positive moment. The limit state is inelastic serviceability limit. which is defined as the ratio of the span to midspan inelastic deflection(C=L/D).

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.971-976
• /
• 2006

This paper presents a design technique of steel structures subjected to static and dynamic loadings using practical nonlinear inelastic analysis software. The beam-column approach using the stability functions and the plastic hinge concept enables the software to suitably predict second-order effects and inelastic behavior of beam-columns. For dynamic analysis. the incremental from of the equation of motion is solved by the use of a step-by-step numerical integration procedure in which the assumption of constant acceleration over a small time step is employed. The accuracy of the analysis program is validated using the results of ABAQUS program and experimental tests. A user-friendly graphic interface of the software is developed to facilitate the modeling process and result interpretation of the problem. A design example of large span bridge is presented to detail the direct design process using the practical advanced analysis software.

• Steel and Composite Structures
• /
• 제28권3호
• /
• pp.319-329
• /
• 2018

The field around additional cutout of the floor beam web in orthotropic bridge deck was subjected to high stress concentration, especially the weld toe between floor beam and U shaped rib and the free edge of the additional cutout. Based on different considerations, different geometrical parameters of additional cutout were proposed in European, American and Japanese specifications, and there remained remarkable differences among them. In this study, considering influence of out-of-plane deformation of floor beam web and U shaped rib, parameter analysis for additional cutout under typical load cases was performed by fine finite element method. The influence of additional cutout shape and height to the stress distribution around the additional cutout were investigated and analyzed. Meanwhile, the static and fatigue test on this structure details was carried out. The stress distribution was consistent with the finite element analysis results. The fatigue property for additional cutout height of 95mm was slightly better than that of 61.5 mm.

• 대한토목학회논문집
• /
• 제33권1호
• /
• pp.1-11
• /
• 2013

본 논문에서는 가설교량의 지간장 증대를 위하여 중앙부 주거더 H형강 상단에 작은 H형강을 보강하고, 지점부 주거더 H형강 하단에 강판을 합성시킨 가설교량을 설계 및 시공하여 현장재하시험으로 실 거동을 분석하고, 해석적 전단좌굴강도와 비선형 거동을 일반 가설교량과 비교 평가하였다. 그 결과, 현장재하시험에 의하여 제안된 가설교량의 실제 거동이 설계 과정에서 고려된 거동과 일치하는 것으로 나타났으며, 본 연구의 설계조건에 있어서 제안한 가설교량의 해석적 전단좌굴강도가 일반 가설교량의 전단좌굴강도보다 약 40% 정도 높은 것으로 분석되었다. 또한 제안된 가설교량의 해석적 극한강도는 일반 가설교량 보다 높은 것으로 평가되어 현장여건의 필요에 의해 제안한 가설교량을 적용할 수 있을 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제10권5호
• /
• pp.115-121
• /
• 2006

본 논문에서는 다양한 형태의 케이블 요소들의 거동이 강사장교의 극한강도에 미치는 영향을 검토하였다. 연화소성힌지 모델을 사용한 극한강도 평가 시 보-기둥 부재의 기하학적 비선형은 안정함수를 사용하여 고려하였고 재료적 비선형성을 반영하기 위하여 CRC 접선계수와 포물선 함수를 사용하였다. 케이블 부재는 새그의 영향이 고려되었다. 연구 결과 등가탄성계수가 반영된 등가트러스 요소를 사용한 경우 강사장교의 극한강도가 케이블 요소 또는 현수선 요소를 사용하여 평가한 극한강도 보다 안전측으로 평가되었다.

• Smart Structures and Systems
• /
• 제14권4호
• /
• pp.501-516
• /
• 2014

The rocking pier system (RPS) allows the columns to rock on beam or foundation surfaces during the attacks of a strong earthquake. Literatures have proved that seismic energy dissipated by the RPS through the column impact is limited. To enhance the energy dissipation capacity of a RPS bridge substructure, frictional hinge dampers (FHDs) were installed and evaluated by shaking table tests. The supplemental FHDs consist of two brass plates sandwiched by three steel plates. The strategy of self-centering design is to isolate the seismic energy by RPS at the columns and then dissipate the energy by FHDs at the bridge deck. Component tests of FHD were first conducted to verify the friction coefficient and dynamic characteristic of the FHDs. In total, 32 shaking table tests were conducted to investigate parameters such as wave forms of the earthquake (El Centro 1940 and Kobe 1995) and normal forces applied on the friction dampers. An analytical model was also proposed to compare with the tested damping of the bridge sub-structure with or without FHDs.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.63-66
• /
• 2008

The bridge deck section composed of a concrete slab resting on two I-beam girders are known to be susceptible to flutter instability and vortex shedding. Moreover, the cable stayed bridge in construction is more vulnerable to wind rather than in service when the free cantilever construction method is applied. This paper describes the effect of the dynamic wind loads on the bridge during construction and the effect of alternative temporary stabilizing measures. Therefore, a series of wind tunnel tests and numerical analysis were carried out to determine if any countermeasures were required.

• 복합신소재구조학회 논문집
• /
• 제2권4호
• /
• pp.11-18
• /
• 2011

본 논문에서는 컴퓨터 시뮬레이션을 통해 강재-FRP 합성 교량용 방호울타리의 성능을 분석하였다. FRP는 Surface veil, DB 그리고 Roving 섬유로 구성하였다. FRP의 적층을 고려하기 위해 LS-DYNA에서 제공하는 재료모델 MAT58을 사용하였다. 강관과 FRP의 접촉조건을 고려하기 위해 Spot weld 옵션을 사용하였다. 실차충돌 실무 업무편람에 따라 구조적 강도성능, 탑승자 보호성능 및 충돌 후 차량의 거동에 대한 성능평가를 실시하였다. 강재-FRP 합성 방호 울타리는 성능평가를 만족하였다.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1711-1717
• /
• 2008

본 논문에서는 신형식 강합성 H형강 교량의 최적 설계단면 결정 및 거동 특성을 분석하고 있다. 단경간 교량과 등간격 2 3경간 연속교량에 대한 설계단면을 도로교 설계기준(2005)을 토대로 최적의 H-형강거더 선정과정을 상세히 기술하고 있으며, 설계단면결정을 위한 구조해석시 범용구조해석프로그램 MIDAS(2006)를 사용하여 발생되는 내력과 응력을 계산하였다. 설계단면의 안전성을 검토하고자 ABAQUS(2007)를 사용하여 설계단면의 발생응력과 처짐을 설계기준의 허용값들과 비교 검토하였다. 검토결과 제안된 설계단면은 안전측으로 제안되고 있음을 확인할 수 있었다.

• Steel and Composite Structures
• /
• 제52권2호
• /
• pp.237-248
• /
• 2024

In order to make the dynamic analysis and design of improved composite beam with corrugated steel web (CBGSCC) bridge more efficient and economical, the parametric self-cyclic analysis model (SCAM) was written in Python on Anaconda platform. The SCAM can call ABAQUS finite element software to realize automatic modeling and dynamic analysis. For the CBGSCC bridge, parameters were set according to the general value range of CBGSCC bridge parameters in actual engineering, the SCAM was used to calculate the large sample model generated by parameter coupling, the optimal value range of each parameter was determined, and the sensitivity of the parameters was analyzed. The number of diaphragms effects weakly on the dynamic characteristics. The deck thickness has the greatest influence on frequency, which decreases as the deck thickness increases, and the deck thickness should be 20-25 cm. The vibration frequency increases with the increase of the bottom plate thickness, the web thickness, and the web height, the bottom plate thickness should be 17-23mm, the web thickness should be 13-17 mm, and the web height should be 1.65-1.7 5 m. Web inclination and Skew Angle should not exceed 30°, and the number of diaphragms should be 3-5 pieces. This method can be used as a new method for structural dynamic analysis, and the importance degree and optimal value range of each parameter of CBGSCC bridge can be used as a reference in the design process.