• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.796-803
• /
• 2008

Ultrasonic testing uses the directivity of the ultrasonic wave, which propagates in on direction. The directivity is expressed as the relationship between the propagate direction and its sound pressure. The directivity of an ultrasonic wave is related to the choice of probe arrangement, testing sensitivity and scanning pitch and correct measurement of defect size and location. This paper describes on the directivity measurement of ultrasonic wave using the visualization method. The directivity of shear wave emitted from the angle beam transducer were constant during propagation. The difference of directivity was existed between 2 MHz and 4 MHz angle beam transducers. When these experimental results were compared with the theory which was based on the continuous wave, it showed good agreement with theoretical directivity on the principal lobe.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.459-460
• /
• 2006

Electron beam manufacturing system can be used to make patterns that are smaller than can a photolithography. In this system, High voltage generator is a fundamental element for stable beam. We used high voltage with transformer. However, this instrument has several problems (for examples, dimensions, buying parts, simplicity of control circuit). For solving these problems, a commercial product is considered. This is developed for SEM(Scanning Electron Microscope). In this paper, we designed a control circuit for a commercial product and analyzed performance.

• 소성∙가공
• /
• 제16권4호
• /
• pp.323-328
• /
• 2007

The residual stress in axial direction of the steel wires has been measured by using a method based on the combination of the focused ion beam(FIB) milling and digital image correlation(DIC) program. The residual stress is calculated from the measured displacement field before and after the introduction of a slot along the steel wires. The displacement is obtained by the digital correlation analysis of high-resolution scanning electron micrographs, while the slot is introduced by FIB milling with low energy beam. The experimental procedures are described and the feasibilities are demonstrated in steel wires fabricated with different conditions. It reveals that the tensile residual stress is formed in all steel wires and this is strongly influenced by the fabrication conditions.

• 한국광학회지
• /
• 제4권4호
• /
• pp.428-433
• /
• 1993

공간적으로 Gaussian인 Q-switched Nd:LYAG레이저의 제2고조파 빛살을 일정한 반경의 pinhole로 중심부분만 통과시켜 집광렌즈로 집광시킨 후, 렌즈의 초점면에서 빛살모양을 관찰하여 본 결과 원형 대칭을 갖는 비Gaussian모양을 하고 있음을 확인할 수 있었다. 이 빛살의 집광영역내에서 두께 1mm의 $CS_2$를 이동(z-scan)하여 가며 자체집광효과에 의하여 변화되는 투과도특성을 조사하였다. 측정된 결과를 Fresnel 이론과 1.5% 이내의 오차 범위로 일치함을 알 수 있었고, 자체집광효율이 입사빛의 공간적 모양과 관계함을 확인할 수 있었다.

• 한국통신학회논문지
• /
• 제21권12호
• /
• pp.3205-3214
• /
• 1996

In this paper, the microstrip phased array antennas with coupling-slots for the base station of mobile communication is proposed and anlyzed with accurate analysis method which is based on both reciprocity principle and full-wave analysis. The basis functions used for the numerical analysis are determined depending upon the accuracy, convergence properties of the solution, and the computation time. The patch uses 3 EB mode and the slot uses IPWS mode. The designed phased array antenna has 8 slot-coupled microstrip patch array elements and the beam scanning capability is obtained by using the 4-bit PIN-diode phase shifters as switching devices which are consisted of the loaded line phase shifters for 30.deg. and 60.deg. and the reflection type phase shifters for 90.deg. and 180.deg. repectively. The 4-bits phase shifters which aremade by connecting each phase shifter have about 2.deg.-3.deg. phase errors and their insertion loss are about 3dB for each phase state. The fabricated 8-element phased array antenna with 4-bits phase shifters provides 12.deg.-14.deg. beamwidths depending on the scanning angle and is capable of scanning its beam to .+-.45.deg. with 9.deg. intervals, and the gain 12dBi. The overall results show that the slot-coupled phased array antenna has great advantages of wideband, high gain and reduced spurious radiation. Also, the antenna can be made small and thin. Furthermore, the scanning property of this antenna allows for its application in several areas, such as mobile communication system and PCS.

• 전자공학회논문지D
• /
• 제35D권9호
• /
• pp.26-34
• /
• 1998

본 논문은 주사전자현미경(SEM)의 전자총을 이용하여 MCM 또는 PCB 회로기판의 신호연결선에서 전압차를 유도시켜 개방/단락 등의 결함을 측정 검사하는 방법을 제시한다. 본 실험에서는 주사전자현미경의 구조를 변형시키지 알고 회로기판의 개방/단락 검사를 실시할 수 있는 이중전위전자빔(Dual Potential) 검사방법을 사용한다. 이중전위전자빔(Dual Potential) 측정검사 방법은 이차전자수율 값 δ의 차이를 유기시키는 δ < 1 인 충전 전자빔과 δ > 1 인 읽기 전자빔을 사용하여 한 개의 전자총이 각각 다른 가속전압에 의해 생성된 두 개의 전자빔으로 측정하는 방법으로 특정 회로네트에 대한 개방/단락 등의 측정 검사가 가능하다. 또한 읽기 전자빔을 이용할 경우 검사한 회로 네트를 방전시킬 수 있어 기판 도체에 유기된 전압차를 없앨 수 있는 방전시험도 실시할 수 있어, 많은 수의 회로네트를 지닌 회로 기판에 대해 측정 검사할 때 충전되어 있는 회로네트에 대한 측정오류를 줄일 수 있다. 측정검사를 실시한 결과 glass-epoxy 회로기판 위에 실장된 구리(Cu) 신호연결선은 7KeV의 충전 전자빔으로 충전시키고 10초 이내에 주사전자현미경을 읽기 모드로 바꾸어 2KeV의 읽기 전자빔으로 구리표면에서의 명암 밝기 차이를 읽어 개방/단락 상태를 검사할 수 있었다. 또한 IC 칩의 Au 패드와 BGA의 Au 도금된 Cu 회로패드를 검사한 결과도 7KeV 충전 전자빔과 2KeV 읽기 전자빔으로 IC칩 내부회로에서의 개방 단락 상태를 쉽게 검사할 수 있었다. 이 검사방법은 주사전자현미경에 있는 한 개의 전자총으로 비파괴적으로 회로 기판의 신호 연결선의 개방/단락 상태를 측정 검사할 수 있음을 보여 주었다.

• Journal of Periodontal and Implant Science
• /
• 제27권4호
• /
• pp.829-844
• /
• 1997

Dentin hypersensitivity must be one of the most frequent postoperative complaints in periodontal patients. Obliterating the open dentinal tubules or decreasing the diameter of their orifices would, therefore, be an objective of treatment for hypersensitive teeth. The purpose of this study was to evaluate the effect of a pulsed Nd:YAG laser irradiation on obliteration of dentinal tubules and to determine any difference according to irradiation methods. The 45 posterior teeth that had been extracted due to periodontal disease were initially treated with tetracycline HCI(100 mg/ml, 4 min.) to remove the smear layer after root planing. The root surfaces were then irradiated by a pulsed Nd:YAG laser(EL.EN.EN060, Italy) by different laser beam spot size and different exposure condition: ${\cdot}$ group 1: irradiated group by small spot(beam diameter=1mm, lW, 2 sec) ${\cdot}$ group 2: irradiated group by large spot(beam diameter=10mm, 1W, 200 sec) ${\cdot}$ group 3: irradiated group by gradual increase of watt (from 0.3W to 1.0W), beam diameter=4mm ${\cdot}$ group 4: irradiated group by fixed watt(1.0 W), beam diameter=4mm ${\cdot}$ control group: no irradiation but root planing and tetracycline HCI conditioning only. Additionally, the specimens were retreated with tetracycline HCI(100mg/ml, 4min.) to evaluate the stability of obliteration effect by Nd:YAG laser. Specimens were examined under the scanning electron microscope(JEOL, JSM-840A, Japan). Photomicrographs were taken at ${\times}4,000$ magnification and were analyzed statistically. The results were as follows: l. Scanning electron micrographs of root surface treated by tetracycline HCI alone(control group) showed widened, funnel-shaped dentinal tubules, while those of the root surface irradiated by various methods showed partially or completely obliterated dentinal tubules and various surface alterations, eg, flat, multiple pitted, melted and resolidified surface at the same energy density. 2. There was no significant difference in the obliteration effect of dentinal tubules between group 1 and group 2, and between group 3 and group 4(p>0.05). 3. The obliteration effect of dentinal tubules by a Nd:YAG laser irradiation was relatively stable to tetracycline HCI. The results demonstrate that a pulsed Nd:YAG laser irradiation within 1.0W, regardless of irradiation methods, can obliterate dentinal tubules effectively.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.93-97
• /
• 2001

A new compact, low-energy electron beam irradiator has been developed. The core-loss of silicon steels can be reduced by magnetic-domain refinement method. The irradiator was developed for the application of core-loss reduction using the method. The beam energy of the irradiator can be varied from 35 to 80 keV and the maximum current is 3mA. The irradiation area is designed to be $30\times30mm2$ now and will be upgraded to $30\times150mm2$ using a scanning magnet and scanning cone. The electron beam generated from 3 mm diameter LaB6 is extracted to the air for the irradiation of the silicon steels in the air. A special irradiation port was developed for this low-energy irradiator. A havar foil with $4.08{\mu}m$ thickness were used for the window and a cold air-cooling system keeps the foil structure by removing heat at the window. The irradiator system and its operation characteristics will be discussed.

• 한국레이저가공학회지
• /
• 제7권2호
• /
• pp.1-10
• /
• 2004

This work was attempted to join SCP sheet and STS304 sheet by using Nd:YAC laser beam. SCP sheet has good formability and low cost, while STS304 has excellent corrosion resistance and mechanical properties in high temp. In this experiment, butt joint type was used to develop the tailored blank welding for dissimilar steel. Sheets which have different thermal properties. Computer simulation was conducted to obtain the off-set position for efficient welding by considering laser power, scanning speed, focal length and basic properties. The result showed that the optimum thermal distribution was obtained when the laser beam was irradiated at $0.05{\sim}0.1$ mm off-set toward the SCP sheet side. The experiment was conducted based on the result of computer simulation to show the same optimum conditions. Optimum conditions were 3KW in laser beam power, 6m/min in scanning speed, -0.5mm in focal position, 0.1mm off-set toward SCP. Microhardness test, tensile test, bulge test, optical microscopy, EDS, and XRD were performed to observe the microstructure around fusion zone and to evaluate the mechanical properties of optimum conditions, The weld zone had high microhardness values by the formation of the martensitic structure. Tensile test measured the strength of welded region by vertical to strain direction and the elongation of welded region by parallel to strain direction. Bulge test showed $52\%$ formability of the original materials. Bead shape, grain size, and martensitic structure were observed by the optical microscopy in the weld zone. Detailed results of EDS, XRD confirmed that the welded region was connected of martensitic structure.

• 폴리머
• /
• 제32권6호
• /
• pp.587-592
• /
• 2008

고분자량 폴리 (비닐 알코올) (poly(vinyl alcohol), PVA)에 전지빔 (electron beam, EB)을 조사하여 상처치료용 드레싱으로 응용이 기대되는 수화젤을 성공적으로 제조하였다. 다양한 겔화율, 물에서의 팽윤도, 겔강도, 및 신도를 가지는 수화젤을 제조하기 위해 수평균 중합도($P_n$)가 1700과 4000인 두 종류의 PVA를 이용하였으며, PVA 수용액 농도와 EB 조사선량은 5$\sim$20%와 30$\sim$100 kGy의 범위로 각각 조절되었다. 제조된 PVA 수화젤의 겔화율과 겔강도는 PVA의 분자량과 수용액의 농도 및 EB 조사선량이 증가함에 따라 증가하였으나, 반면에, PVA 수화젤의 팽윤도와 신도는 감소하였다. PVA 수화젤의 가교밀도에 따른 열적특성과 결정성의 변화는 differential scanning calorimetry와 X-ray diffraction을 이용하여 분석되었다.