• 농촌계획
• /
• 제12권2호
• /
• pp.57-64
• /
• 2006

The experiment was carried out to determine the distribution of total coliform the translocation of heavy metals and the salt accumulation in soils following the supply of ground water, the domestic wastewater and the ultraviolet treatment of domestic wastewater during the spinach and the chinese cabbage cultivation. There were not much changes in the Total-N, Total-P and cations in soils following the ultraviolet treatment of the domestic wastewater. However, the density of total coliform was dramatically reduced from 894MPN/100mL to 5MPN/100mL. The diagnosis of composition of soil after the harvest of chinese cabbages and spinach has shown that the concentration of Na$^+$ was 3-4 times higher in plot using domestic wastewater than in plot using ground water. When domestic wastewater and ground water were used in growing spinach md chinese cabbage at 50% each, the application of chemical fertilizers reduced about 25% to 50% compared to the criteria set down by the Rural Development Administration and there was not significant difference in terms of harvest. Using non-ultraviolet treatment of domestic wastewater directly on spinach and chinese cabbage has resulted in excessive density of total coliform at 25,000MPN/100mL. Even when ultraviolet treatment, the density was still high at 2,000MPN/100mL. The high density of total coliform even following ultraviolet treatment of domestic wastewater is considered to be caused by photo-reactivation of micro-organism. When reusing domestic wastewater, the application of sterilization such as ultraviolet, ultrasonic and electron-beam for public health and hygiene reasons may provide safe supply of agricultural water.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1272_1274
• /
• 2009

$MgF_2$ is a current material for the optical applications in the UV and deep UV range. Process variables for manufacturing the $MgF_2$ thin film were established in order to clarify optimum conditions for growth of the thin film depending upon process conditions, and then by changing a number of vapor deposition conditions and substrate temperature, Annealing conditions variously, structural and Optical characteristics were measured. Thereby, optimum process variables were derived. Nevertheless, modern applications still require improvement of the optical and structural quality of the deposited layers. In the present work, the composition and microstructure of $MgF_2$ single layers grown on slide glass substrate by Electro beam Evaporator(KV-660) processes, were analyzed and compared. The surface Substrate temperature having an effect on the quality of the thin film was changed from 200[$^{\circ}C$] to 350[$^{\circ}C$] at intervals of 50[$^{\circ}C$]. and annealing temperature an effect on the thin film was changed from 200[$^{\circ}C$] to 400[$^{\circ}C$] at intervals of 50[$^{\circ}C$]. Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM.

• 한국진공학회지
• /
• 제7권3호
• /
• pp.176-186
• /
• 1998

Si 기판 위에 3종의 Pt-Co 합금박막 (Pt66-Co34, Pt40-Co60, Pt18-Co82)과 순수한 Pt, Co 박막 시료를 제작하여 표면 조성분석의 정량화 및 표준화를 위한 표준시료로 제안하 였다. in-istu X-ray photoelectron spectroscopy(XPS)분석에 의해 증착된 이원 합금박막의 조성이 정확히 조절되었으며, 합금박막의 실제 조성은 유도결합플라즈마-원자방출분광법 (inductively coupled plasma-atomic emission spectroscopy: ICP-AES)과 러더퍼드 후방산 란분광법(Ruthford back-scattering spectrometry: RBS)에 의해 결정되었다. in-situ XPS 결과와 ICP에 의한 조성을 비교한 결과 매질 효과를 고려하면 비교적 정확한 조성을 구할 수 있음이 확인되었다. 이 시료를 이용한 XPS와 Auger electron spectroscopy(AES)에 의한 국내 공동분석 결과는 약4%내외의 큰 편차를 보이고 있지만, 평균 조성 값은 약1%의 오차 범위 내에서 두 방법에 의한 결과가 서로 잘 일치하였다. 이온빔 스퍼터링에 의해 Pt조성이 증가된 표면층이 형성되어 정확한 조성분석을 위해서는 선택스퍼터링에 의한 표면 변형을 정량적으로 함을 알았다.

• 한국미생물·생명공학회지
• /
• 제11권1호
• /
• pp.39-45
• /
• 1983

세포외 효소를 분필하는 Bacillus amyloliquefaciens의 생육을 선택적으로 저해하는 항생물질을 분리하고저 대구 근교의 토양시료 100여점을 채취하여 Streptomyces sp. KM-48주를 최종 선별하였다. 이 균주의 Nutrient Broth 배지에서의 배양00으로부터 활성성분을 acetone 유출, $Al_2$O$_3$, chromatography, avical TLC를 하여 UV 조사하에서 청록색 형광을 나타내는 단일물질로 정제하였다. 이 물질은 주로 그람양성균과 균모, 곰팡이 등에 강한 항균효과를 나타내었으며 Bacillus amyloliquefaciens에 대한 50% 생육저해농도가 18$\mu\textrm{g}$/$m\ell$이었다. 이 물질은 열에 비교적 약하였으며 산에는 강하게 그 활성이 유지되었다. 균주의 형태 및 배양성에서 Stretommces tsusimaensis의 유이균으로 동정되었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2007년도 춘계종합학술대회
• /
• pp.524-527
• /
• 2007

이온 빔 스퍼터법을 이용하여 저속성장으로 동시 증착에 의해 $Bi_2Sr_2Ca_{n-1}Cu_nO_x$(n=0, 1, 2) 박막을 제작하였다. Bi 2212 상은 기판온도 $750\sim795^{\circ}C$의 범위에서 나타났으며, $750^{\circ}C$보다 저온 측에서는 Bi 2201의 단일강이 존재하였나. 그러나, 조성과 관계되는 $PO_3$에 대해서 크게 변하지 않았다. 그리고 임계온도(Tc)가 $45\sim90K$ 가지는 c축 배향한 고품질의 Bi 2212 박막을 얻었다. 소수의 박막에서는 소량의 CuO가 불순물로 관찰되었으며, 얻어진 모든 박막에서 $CaCuO_2$의 불순물 상은 관찰되지 않았다.

• 한국정보통신학회논문지
• /
• 제21권3호
• /
• pp.530-536
• /
• 2017

해양 산업과 서비스업의 성장으로 인하여 소형 선박의 사고가 증가하고 있다. 이러한 문제를 해결하기 위하여 소형 선박에 레이더 의무 장착을 시행하고 있다. 하지만 기존의 펄스 레이더를 소형 선박에 설치하면 유지보수 비용 및 높은 송신 전력등의 문제들이 발생한다. 본 연구에서는 전자적으로 빔을 회전하는 위상배열안테나를 이용하여 상기문제를 해결가능한 선박용 고정형 레이더에 적용 가능한 안테나를 제작하여 시험하였다. 그 결과 정면에 대한 빔 폭은 $5^{\circ}$내외로 레이더에 적용에 대한 가능성을 볼 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1996년도 제11회 학술발표회 논문개요집
• /
• pp.40-41
• /
• 1996

Nitridation technique has been receiving much attention for the formation of a thin nitrided buffer layer on which high quality nitride films can be formedl. Particularly, gallium nitride (GaN) has been considered as a promising material for blue-and ultraviolet-emitting devices. It can also be used for in situ formed and stable passivation layers for selective growth of $GaAs_2$. In this work, formation of a thin nitrided layer is investigated. Nitrogen electron cyclotron resonance(ECR)-plasma is employed for the formation of thin nitrided layer. The plasma source used in this work is a compact ECR plasma gun3 which is specifically designed to enhance control, and to provide in-situ monitoring of plasma parameters during plasma-assisted processing. Microwave power of 100-200 W was used to excite the plasma which was emitted from an orifice of 25 rnm in diameter. The substrate were positioned 15 em away from the orifice of plasma source. Prior to nitridation is performed, the surface of n-type (001)GaAs was exposed to hydrogen plasma for 20 min at $300{\;}^{\circ}C$ in order to eliminate a native oxide formed on GaAs surface. Change from ring to streak in RHEED pattern can be obtained through the irradiation of hydrogen plasma, indicating a clean surface. Nitridation was carried out for 5-40 min at $RT-600{\;}^{\circ}C$ in a ECR plasma-assisted molecular beam epitaxy system. Typical chamber pressure was $7.5{\times}lO^{-4}$ Torr during the nitridations at $N_2$ flow rate of 10 seem.(omitted)mitted)

• 대한치과교정학회지
• /
• 제50권5호
• /
• pp.346-355
• /
• 2020

The treatment of skeletal Class III malocclusion in adolescents is challenging. Maxillary protraction, particularly that using bone anchorage, has been proven to be an effective method for the stimulation of maxillary growth. However, the conventional procedure, which involves the surgical implantation of mini-plates, is traumatic and associated with a high risk. Three-dimensional (3D) digital technology offers the possibility of individualized treatment. Customized mini-plates can be designed according to the shape of the maxillary surface and the positions of the roots on cone-beam computed tomography scans; this reduces both the surgical risk and patient trauma. Here we report a case involving a 12-year-old adolescent girl with skeletal Class III malocclusion and midface deficiency that was treated in two phases. In phase 1, rapid maxillary expansion and protraction were performed using 3D-printed mini-plates for anchorage. The mini-plates exhibited better adaptation to the bone contour, and titanium screw implantation was safer because of the customized design. The orthopedic force applied to each mini-plate was approximately 400-500 g, and the plates remained stable during the maxillary protraction process, which exhibited efficacious orthopedic effects and significantly improved the facial profile and esthetics. In phase 2, fixed appliances were used for alignment and leveling of the maxillary and mandibular dentitions. The complete two-phase treatment lasted for 24 months. After 48 months of retention, the treatment outcomes remained stable.

• 대한본초학회지
• /
• 제22권1호
• /
• pp.63-70
• /
• 2007

Objectives : This experimental study was designed to investigate the effects of Acanthopanax, sessiliflorus SEEM extracts following gamma-ray irradiation on immuno-stimulating and anti-tumor activity in terms of proliferation of tumor cells, thymocytes, splenocytes, and NO production from peritoneal macrophages in mice. Methods: 10AS and 100 AS were the bark powders of Acanthopanax sessiliflorus $S_{EEM}$ stems which were exposed in 10 kGy or 100 kGy of electron beam respectively. Results : Treatment with either 10AS or 100AS increased proliferation rates of thymocytes and splenocytes significantly, and treatment with l0AS also decreased proliferation rates of tumor cells significantly. Treatment with either l0AS or l00AS promoted NO production from peritoneal macrophages significantly. Conclusion : These results suggested that AS has direct inhibition effect of tumor growth and immuno-stimulating activity. In conclusion, we demonstrate that AS could be used to treat cancer patient as complementary or alternative medicine to typical anti-cancer medication.

• The Journal of Advanced Prosthodontics
• /
• 제6권2호
• /
• pp.96-102
• /
• 2014

PURPOSE. This study was performed to characterize the effects of zirconia coated with calcium phosphate and hydroxyapatite compared to smooth zirconia after bone marrow-derived osteoblast culture. MATERIALS AND METHODS. Bone marrow-derived osteoblasts were cultured on (1) smooth zirconia, (2) zirconia coated with calcium phosphate (CaP), and (3) zirconia coated with hydroxyapatite (HA). The tetrazolium-based colorimetric assay (MTT test) was used for cell proliferation evaluation. Scanning electron microscopy (SEM) and alkaline phosphatase (ALP) activity was measured to evaluate the cellular morphology and differentiation rate. X-ray photoelectron spectroscopy (XPS) was employed for the analysis of surface chemistry. The genetic expression of the osteoblasts and dissolution behavior of the coatings were observed. Assessment of the significance level of the differences between the groups was done with analysis of variance (ANOVA). RESULTS. From the MTT assay, no significant difference between smooth and surface coated zirconia was found (P>.05). From the SEM image, cells on all three groups of discs were sporadically triangular or spread out in shape with formation of filopodia. From the ALP activity assay, the optical density of osteoblasts on smooth zirconia discs was higher than that on surface treated zirconia discs (P>.05). Most of the genes related to cell adhesion showed similar expression level between smooth and surface treated zirconia. The dissolution rate was higher with CaP than HA coating. CONCLUSION. The attachment and growth behavior of bone-marrow-derived osteoblasts cultured on smooth surface coated zirconia showed comparable results. However, the HA coating showed more time-dependent stability compared to the CaP coating.