• Journal of the Korean Society for Heat Treatment
• /
• v.4 no.4
• /
• pp.15-23
• /
• 1991

The damping capacities of the nonthermoelastic bcc type lath martensite and of the nonthermoelastic hcp type thin plate martensite in Fe-Mn alloys were studied. Fe-17%Mn alloy showing the hcp type thin plate martensite was superior to Fe-4%Mn alloy having the bcc type lath martensite in damping capacity. The damping capacity of the Fe-17%Mn alloy became greater with increasing the hcp martensite volume fraction. The damping mechanism of the Fe-4%Mn alloy was well explained by the dislocation model. However, the damping mechanism of the Fe-17%Mn alloy was explained on the basis of austenite/martensite interface moving model. The two alloys showed almost same levels of tensile strength. However, the elongation was greater in the Fe-17%Mn alloy than in the Fe-4%Mn alloy, showing lower yield strength in the former than in the latter. This result was considered to be attributed to formation of stress-induced martensite during tension test.

• Transactions of Materials Processing
• /
• v.23 no.4
• /
• pp.231-237
• /
• 2014

In the current study, a rate-dependent crystal plasticity finite element method (CPFEM) was used to simulate flow stress behavior and texture evolution of a body-centered cubic (BCC) crystalline material during plastic deformation at room temperature. To account for crystallographic slip and rotation, a rate-dependent crystal constitutive law with a hardening model was incorporated into an in-house finite element program, CAMPform3D. Microstructural heterogeneity and anisotropy were handled by assigning a crystallographic orientation to each integration point of the element and determining the stiffness matrix of the individual crystal. Uniaxial tensile tests of single crystals with different crystallographic orientations were simulated to determine the material parameters in the hardening model. The texture evolution during four different deformation modes - uniaxial tension, uniaxial compression, channel die compression, and simple shear deformation - was investigated based on the comparison with experimental data available in the literature.

• The Journal of the Korea Contents Association
• /
• v.11 no.6
• /
• pp.397-406
• /
• 2011

This paper analyzes the efficiency of Korean Financial Investment Institution using DEA model. We evaluate the CCR, BCC efficiency and RTS of 30 Financial Investment Institution. We also suggest the Financial Investment Institution which can be benchmarked based on analyzed information. The result shows that 3 Institution whose values of CCR efficiency are 1, and 7 Institution whose values of BCC efficiency are 1. RTS indicates IRS of 21 Investments, DRS of 6 Investments and CRS of 3 Investments.

• Journal of Navigation and Port Research
• /
• v.37 no.2
• /
• pp.195-201
• /
• 2013

Recently according to increase of enlarged scale ports in conformity with increase in over size vessels and container handling service, pollutants generated from ports are increasing. In advanced countries, reduction in carbon dioxide emission assigned to them has been implemented according to the Climate Change Convention and Kyoto Protocol from 2008 to 2012 in order to lessen carbon dioxide emission. Henceforth increase in discussion on the measure of constructing Green Port and low-carbon port is expected in our nation's field of port as well, it is considered that the effort in reduction with regard to undesirable output which causes environmental problem of analysis target during measuring effectiveness. Therefore, in this study, effectiveness was estimated through directional technology distance function considering undesirable output differently from effectiveness analysis of existing container terminal, and then performed comparative analysis with the result analyzed with BCC output-oriented model. As the result of analysis, in 2007 DMU3 and DMU5, and in 2010 DMU2 and DMU4 appeared to be efficient terminals in BCC output oriented model, and in directional technology distance function model, DMU1, DMU3 in 2007, DMU3, DMU5 in 2008, DMU7 in 2009, and DMU2, DMU5 in 2010 appeared to be efficient terminals.

• Korean Journal of Organic Agriculture
• /
• v.30 no.4
• /
• pp.499-516
• /
• 2022

Blueberry producers' management is failing as a result of the price decline caused by an increase in blueberry imports and the accompanying deterioration in management. Consequently, an endeavor was undertaken to verify the measurement and impact from the standpoint of efficiency and productivity of blueberry management, and to offer an indication of management improvement through analysis. Using the Rural Development Administration's income survey data, the data for twenty-four blueberry farms was analyzed. First, the management effectiveness of blueberry cultivators was evaluated. Using the CCR model (0.7297) and the BCC model (08148), the efficiency of a farm was examined. When the efficiency is one, CCR is ten and BCC is fifteen, and in overall, it was found to be ineffective, the efficiency declined from 2018 to 2019, but climbed again in 2020, according to the annual analysis. The MPI index was then used to examine productivity. T2's MPI index was 1.3338, whereas T3's MPI index was 0.8896, demonstrating a considerable decline in TC. This indicates that technological progress is not being accomplished, necessitating the need for countermeasures. In order to improve the management efficiency of blueberry producers, it is necessary to reduce costs and improve receivable prices through producer organization, and to actively introduce new technologies.

• International Area Studies Review
• /
• v.13 no.3
• /
• pp.729-757
• /
• 2009

This paper examines if China' each province.city manages its organization well after China's WTO affiliation; and on the ground, judges how much each province city needs to improve. China's each province city data from 2002 to 2006 is used to evaluate technical efficiency by using the input-oriented CCR model and the input-oriented BCC model. Analytical results show that only Shanghai gets continuously the highest efficiency score from 2002 to 2006 and so the other provinces cities need to benchmark Shanghai to elevate their efficiency. There can be regional, cultural and emotional differences among the provinces cities but Tibet, Shaanxi, Gansu, Qinghai, Ningxia and Xinjiang get low efficiency scores even after China's WTO affiliation. The Chinese government can make use of efficiency evaluation results by DEA as basic materials in making economic development schemes in order to reduce these deviations as various minority races constitutes China and there are regional deviations of degree of economic development in China.

• Journal of Korea Port Economic Association
• /
• v.21 no.1
• /
• pp.133-151
• /
• 2005

The purpose of this paper is to investigate the international competition power between Korean ports and Chinese ports according to the port efficiency scores of DEA(Data Envelopment Analysis) by newly introducing the priority vector of AHP(Analytic Hierarchy Process) to the DEA method. Empirical analysis shows the followings: First, there was not big changes of DEA rankings when we use the input-oriented CCR and BCC models after introducing the AHP priority vectors to the input variables. Yantian Port's competition power was declined, but that of Busan Port was up in the BCC model. Second, there was some changes of DEA rankings when we use the output-oriented CCR and BCC models after introducing the AHP priority vectors to the output variables. Rankings of Dalian, Qingdao, Shanghai Ports were up. But Shekou, Yantian Ports showed the declined ranking position in the CCR model. In the BBC model, rankings of Shanghai and Busan Ports were up. But those of Shekou and Yantian Ports were declined. The main policy implication based on the findings of this study is that The Ministry of Maritime Affairs & Fisheries in Korea and China should introduce AHP and DEA approaches when they measure the international competition power by using the porrt efficiency scores of DEA.

• IE interfaces
• /
• v.19 no.4
• /
• pp.291-299
• /
• 2006

In order to enhance sustainable war fighting capabilities, it is important to maintain a good ammunition support system. In this paper, we evaluate the performance of ammunition companies using Imprecise Data Envelopment Analysis (IDEA)-BCC and IDEA-Additive model, which can deal with imprecise data in DEA. The input variables of IDEA models were selected by stepwise multiple regression analysis. With the regression model, we could choose the number of soldiers, officers, and ammunition warehouses as input variables that have significant effects on the output performance. Then, we applied the IDEA-BCC model with the concept of potential efficiency. The results of the model indicate that 8 out of 16 ammunition companies are efficient, 7 are inefficient, and 1 is potentially efficient. We could also identify the possible input excesses and output shortfalls to reach the efficient frontier using the IDEA-Additive model.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.17
• /
• pp.7443-7447
• /
• 2014

Aim: Little is known about the genetic associations with Basal cell carcinoma (BCC) risk in non-Caucasian populations, in which BCC is rare, as in Korea. We here conducted a pilot genome-wide association study (GWAS) in 12 patients and 48 standard controls. Method: A total of 263,511 SNPs were analyzed with the Illumina HumanOmni1 Quad v1.0 DNA Analysis BeadChip for cases and Korean HapMap 570K for controls. Results: SNP-based analyses, based on the allele genetic model with adjustment for sex and age showed suggestive associations with BCC risk for 6 SNPs with a P-value (P < 0.0005). However, these associations were not statistically significant after Bonferroni correction: rs1040503, rs2216491, rs13407683, rs4751072, rs9891263, and rs1368474. In addition, results from gene-based analyses showed suggestive associations with BCC risk for 33 candidate genes with a P-value (P <0.0005). Consistent with previous GWAS and replication studies in Caucasian populations, PADI6, RHOU and SLC45A2 were identified as having null associations with BCC (P > 0.05), likely due to the smaller sample size. Conclusions: Although this was a small-scale negative study, to our knowledge, we have conducted the first GWAS for BCC risk in an Asian population. Further large studies in non-Caucasian populations are required to achieve statistical significance and confirm these findings.

• Journal of Korea Port Economic Association
• /
• v.31 no.3
• /
• pp.155-166
• /
• 2015

This study selected container terminals of Gwangyang and Busan Ports to evaluate the influence of efficient container terminals. For the study, after data envelopment analysis (DEA) using the CCR and BCC models, the decision-making unit (DMU) system was used to define nodes; and with the use of a reference group in DEA (BCC model) and a lambda value, this study created a social network and analyzed the influences of efficient DMUs through a centrality analysis of eigenvectors. The results are presented as follows: First, as a result of the DEA, CCR efficiencies in PNC, HJNC, and HPNT container terminals of Busan Port were 1 and BCC efficiencies at Singamman Terminal, Wooam Terminal, PNC, HJNC, HPNT, and BNCT container terminals of Busan Port were 1. Second, as a result of undertaking social network analysis (SNA), according to an eigenvector centrality analysis, HJNC Terminal was referred to the most (influence score of 0.515), which indicates that it is the most influential as a container terminal. The influence of PNC Terminal was 0.512, while that of Wooam Terminal was 0.379. CJ Korea Express in Gwangyang Port was ranked fourth in influence, but its influence score of 0.256 indicates that it was the most influential of the container terminals at Gwangyang Port.