• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.09a
• /
• pp.95-98
• /
• 2003

Waste lime is produced as by-products in chemical industry, Reuse of waste lime mixed with soil for banking and backfill material in civil works was analysed in this study. For this purpose, environmental effect of waste lime admixtures was tested. Thus, this study presents the leaching characterization of waste lime in laboratory batch and column tests. Countermeasure for reduction of environmental effects was suggested from the test results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.189-194
• /
• 1995

This paper presents the material properties and production of 500 and 700 kg/$\textrm{cm}^2$ high strength concrete for the practical utilization. A series of Lab. tests were conducted to optimize the material mixture of high strength concrete and then mock-up tests were performed through the Remicon Batch Plant. This paper stresses the material conditions for the final stage of production of 500 and 700 kg/$\textrm{cm}^2$ high strength concrete, just prior to the practical use on 28-story Samsung Shin-Daebang Housing-Commercial Combined Building with 8-story basements.

• Journal of Environmental Science International
• /
• v.18 no.2
• /
• pp.187-195
• /
• 2009

This study was investigated to control the corrosion and scale at the cooling water system in steel works. Laboratory and field tests were performed for the indirect cooling water system of plate mill. Throughout the experiment, various factors such as leakage of pipes, heating rate and capacity, and the reaction between existing and substitute inhibitors were carefully monitored. The results showed that the harmful effect of high temperature could be minimized, and satisfactory corrosion/scale controls were effectively achieved using inhibitor, even at the increased temperature of $80^{\circ}C$. The batch and field tests in the gas scrubbing cooling water system of blast furnace and cooling water system of corex plant indicated that the new inhibitor was more effective for the prevention of corrosion and scale than the existing one.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.629-636
• /
• 2003

The retardation of heavy metals in a mixture of fly ash and bentonite was studied as a potential barrier material for a landfill. Column tests were conducted using synthetic leachate having 100 mg/L and 50 mg/L of lead (Pb) and cadmium (Cd), respectively. Results indicated that the mixture had obvious retardation ability for heavy metals. To investigate the retardation factor caused by adsorption, batch adsorption tests were conducted at various concentrations. Test results were correlated with both Langmuir and Freundlich isotherms. The adsorption of the lead ion was applicable to the Langmuir isotherm and the adsorption of the cadmium ion was applicable to the Freundlich isotherm. In addition, based on experimental results, the migration characteristics of heavy metals through the bed of fly ash and bentonite mixture were investigated using the PHREEQC, a reactive transport model, under the real conditions of the landfill liner.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.122-124
• /
• 2002

The removal capacity of zero-valent iron for Cr(Ⅵ) was evaluated using batch kinetic tests. The rate constants for zero-valent iron dramatically increased as initial Cr(Ⅵ) concentration decreased. Generally, the reaction rates of Cr(Ⅵ) with zero-valent iron were faster than that of a biotic degradation of Cr(Ⅵ), and furthermore the reaction rates were inversely proportional to the initial Cr(Ⅵ) concentrations. After certain reaction time elapsed. no further decrease of Cr(Ⅵ) was observed, indicating a loss of iron reactivity. The loss of iron reactivity was primarily due to the passivation of iron surfaces with iron-Cr precipitates, but the reactivity of iron was recovered by adding iron-reducing bacteria. Even though the addition of bacteria itself removed Cr(Ⅵ), the combination of iron-reducing bactera and oxidized iron significantly enhanced the reaction rate for Cr(Ⅵ) removal. The results from column tests also confirmed that the innoculation of iron-reducing bacteria to the column containing completely oxidized iron partially enhanced the recovery of the iron reactivity.

• Resources Recycling
• /
• v.8 no.3
• /
• pp.43-48
• /
• 1999

The pupose of h s study was to develop a process for removal of unburnzd carbon li-om fly ash by froth flotation. "Carbon zero (C.Z)" develqcd by KIGAM, gave the best results, praduci112 cleaned fly ash containing abom 0.1% FC with 72% yieldBased on the results of batch flotation tests, the pilot-scale tests wcre conducted. The result showed that cleaned fly ash with 0.1% FC could be recovered by about 73% yield.t 73% yield.

• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.333-341
• /
• 2006

The concept for the decolorization in biological dye wastewater treatment systems is based on anaerobic treatment, for the reductive cleavage of the dyes' azo linkages, in combination with aerobic treatment, for the degradation of the products from azo dye cleavage, aromatic amines. Batch tests were conducted to examine the conditions and the factors affecting biological treatment of dye wastewater. From the tests, the removal efficiencies of organics and colors of dyeing wastewater were improved to $COD_{Cr}$ 27% and color 9% by injecting 10% of the domestic wastewater as a cosubstrate, and $COD_{Cr}$ 30%, color 22% with 30% injection of domestic wastewater. Therefore it was proved that decolorization efficiency is demonstrated with domestic wastewater as a cosubstrate. The analysis of aromatic amines in wastewater showed that decolorization was achieved by cometabolism while aromatic amines were produced by cleavage of azo bonds under anaerobic conditions and these products were removed in an aerobic tank subsequently.

• Journal of Environmental Health Sciences
• /
• v.29 no.1
• /
• pp.62-66
• /
• 2003

The biological denitrification batch tests were conducted to optimize the operating conditions with various temperature and initial SCO $D_{Cr}$ /N $O_3$-N ratio. and the denitrification rates were analyzed various SCO $D_{Cr}$ /N $o_3$-N ratio of influent with swine wastes fermented and temperature. The finishing time of denitrification was within 15 hours, 12 hours, and 6 hours as the temperature of denitrification applied were 15$\pm$1$^{\circ}C$, 25$\pm$1$^{\circ}C$, and 31$\pm$1$^{\circ}C$, respectively. From the batch tests, denitrification rate was operated with over 3 of SCO $D_{Cr}$ /N $O_3$-N ratio. Denitrification rate was increased as the temperature of denitrification, increased such as 2.40-3.90 mg N $O_3$-N/gMLVSSㆍhr, 6.10-7.60 mgN $O_3$-N/gMLVSSㆍhr, and 14.40-15.88 mgN $O_3$-N/gMLVSSㆍhr, respectively. The denitrification rate was increased as the ratio of initial SCO $D_{Cr}$ N $O_3$-N increased. However, it was found that the suitable ratio of SCO $D_{Cr}$ /N $O_3$-N for denitrification should be considered because the ratio of mg SCO $D_{Cr}$ , consumed per mg N $O_3$-N removed varied depend on the influent SCO $D_{Cr}$ /TKN ratios.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.1
• /
• pp.49-56
• /
• 2014

This study was conducted to investigate the biodegradation characteristics of swine and cattle using anaerobic batch tests. The results showed that the maximum methane production rate($MPR_{max}$) and acclimation time(AT) of swine were 46.7 mL $CH_4/g$ VS.d and 17.2 d, respectively. The $MPR_{max}$ and AT of cattle were 56.5% and 24.0% lower than those of swine. The characteristics of anaerobic biodegradation varied with livestock species but $MPR_{max}$ and AT increased linearly with the content of lipid. The $MPR_{max}$ and AT of cattle with content of lipid were more sensitive than those of swine.

• Journal of Aerospace System Engineering
• /
• v.10 no.3
• /
• pp.63-69
• /
• 2016

The properties of composite materials, when compared to those of metallic materials, are highly variable due to many factors including the batch-to-batch variability of raw materials, the prepreg manufacturing process, material handling, part-fabrication techniques, ply-stacking sequences, environmental conditions, and test procedures. It is therefore necessary to apply reliable statistical-analysis techniques to obtain the design allowables of composite materials. A new composite-material qualification process has been developed by the Advanced General Aviation Transport Experiments (AGATE) consortium to yield the lamina-design allowables of composite materials according to standardized coupon-level tests and statistical techniques; moreover, the generated allowables database can be shared among multiple users without a repeating of the full qualification procedure by each user. In 2005, NASA established the National Center for Advanced Materials Performance (NCAMP) with the purpose of refining and enhancing the AGATE process to a self-sustaining level to serve the entire aerospace industry. In this paper, the statistical techniques and procedures for the generation of the allowables of aerospace composite materials will be discussed with a focus on the pooling-across-environments method.