• Korean Journal of Environmental Agriculture
• /
• v.17 no.3
• /
• pp.234-238
• /
• 1998

Anaerobic degradation characteristics of dewatered liquid of household food waste including methane conversion efficiency and degradation kinetics were studied in an anaerobic batch reactor of 5 L volume. The ultimate methane production for dewatered liquid of household food waste tested was over 0.31L $CH_4/L{\cdot}dewatered$ liquid of household food waste. The kinetic constant of dewatered liquid of household food waste tested was $0.223d^{-1}/L$. The kinetic behavior of anaerobic degradation was described as a first order series reaction. The determinant of rate-limiting step(DR) that is balanced out from the rates of reaction steps was defined by the logarithmic difference of the maximum acidification rate and the maximum methanation rate. Anaerobic degradation characteristics of organic materials were evaluated by the value of DR. The DR of dewatered liquid of household food waste tested was 1.17.

• Journal of the Korean Society of Safety
• /
• v.25 no.3
• /
• pp.61-65
• /
• 2010

Most of the chemical reactions performed in the chemical industry are exothermic, meaning that thermal energy is released during the reaction. It is also important to understand the thermal hazards such as thermal stabilities and runaway reactions, which are governed by thermodynamics and reaction kinetics of the mixed materials. The paper was described the evaluation of thermal behavior caused by an exothermic batch process in manufacture of the vinyl acetate resin. The aim of the study was to evaluate the thermal stabilities of raw materials with operating conditions such as a reaction inhibitor, heating rate, reaction atmosphere and the mount of methanol charged in the vinyl acetate polymerization process. The experiments were performed in the differential scanning calorimeter(DSC), C 80 calorimeter, and thermal screening unit($TS^u$). It was suggested that we should provide the thermal characteristics for raw materials to present safe precautions with operating conditions in the vinyl acetate polymerization process.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.1
• /
• pp.77-85
• /
• 2012

The present study investigates treatment methods for removal of arsenic from wastewater. The granular activated carbon (GAC) with the coating of iron chloride ($FeCl_3$) was used for the treatment of a low concentration of arsenic from wastewater. Batch experiments were performed to investigate the synthesis of Fe-GAC (Iron coated granular activated carbon), effects of pH, adsorption kinetics and the Langmuir model. The synthesized Fe-GAC with 0.1 M $FeCl_3$ shows best removal efficiency. Adsorption studies were carried out in the optimum pH range of 4-6 for arsenic removal. The Fe-GAC showed promising results by removing 99.4% of arsenic. In the adsorption isotherm studies, the observed data fitted well with the Langmuir models. In continuous column study showed that As(V) could be removed to below 0.25 mg/L within 1,020 pore volume. Our results suggest that the surface modified granular activated carbon treated with $FeCl_3$ for effective removal of arsenic from wastewater.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.1817-1824
• /
• 2014

The adsorption characteristics of chromium (VI) and phosphate on calcined Mg-Al-$CO_3$ layered double hydroxides (CLDH) were investigated in single and binary systems. A series of batch experiments were performed to study the influence of various experimental parameters. In this study, CLDH exhibited a high adsorption capacity for Cr (VI) and P in a single system. The experimental data were close to the theoretical adsorption capacity given by the Langmuir isotherm, the calculating adsorption capacities of Cr (VI) and P were up to 70.42 mg/g and 97.09 mg/g, respectively. It was found that the initial pH was approximately 6 and it took 24 h to reach equilibrium when P and Cr (VI) were added simultaneously. The experimental data were best fitted by a pseudo-second-order kinetics model. Competitive adsorption between Cr (VI) and P existed in the binary system. The presence of Cr (VI) had no significant influence on P adsorption. However, the suppression of Cr (VI) adsorption was obvious when the initial concentration of P was up to 10 mg/L with a concentration of 0.5 g/L of CLDH.

• Journal of Environmental Science International
• /
• v.24 no.9
• /
• pp.1145-1153
• /
• 2015

PVC-Zeolite composite was prepared by immobilizing zeolite with polyvinyl chloride (PVC). The prepared PVC-Zeolite beads were characterized by using X-ray diffractometer (XRD), fourier transform infrared spectrometer (FTIR), thermo gravimetric analyzer (TGA), and scanning electron microscopy (SEM). The removal properties of Sr and Cs ions from aqueous solution were investigated in batch experiment. The removal efficiencies of Sr and Cs ions by the PVC-Zeolite beads were dependent on the initial pH of solution. The removal efficiencies sharply increased at below pH 4 and was kept constant at pH 4 or more. The adsorption kinetics of Sr and Cs ions by the PVC-Zeolite beads were fitted well by the pseudo-second-order model ($r^2$>0.99) more than pseudo-first-order model. The maximum adsorption capacities of Sr and Cs ions calculated from Langmuir isotherm model were 39.37 mg/g and 55.87 mg/g, respectively.

• Journal of Environmental Science International
• /
• v.26 no.3
• /
• pp.363-371
• /
• 2017

This study evaluates the adsorption properties of Sr ions in an aqueous solution of the synthetic zeolite (Z-Y1) prepared using coal fly ash generated from a thermal power plant. In order to investigate the adsorption characteristics, the effects of various parameters such as the initial concentrations of Sr ion, contact time, and solution pH were investigated in a batch mode. The Langmuir and Redlich-Peterson model fitted the adsorption isotherm data better than the Freundlich model. The maximum adsorption capacity of Sr ions, as determined the Langmuir model, was 181.68 mg/g. It was found that by varying the Sr ion concentration, pH, and temperature, the pseudo-second-order kinetic model describes the adsorption kinetics of the Sr ion better than the pseudo-first-order kinetic model. The calculated thermodynamic parameters of ${\Delta}H^0$ and ${\Delta}G^0$ showed that the adsorption of Sr ions on Z-Y1 was occurred through a spontaneous and an endothermic reaction. We found that the adsorption of Sr ions by Z-Y1 was more affected by pH than by temperature and Sr ion concentration.

• Carbon letters
• /
• v.3 no.1
• /
• pp.6-12
• /
• 2002

A study on the electrosorption of $Co^{2+}$ and $Sr^{2+}$ ions onto a porous activated carbon fiber (ACF) was performed to treat radioactive liquid wastes resulting from chemical or electrochemical decontamination and to regenerate the spent carbon electrode. The result of batch electrosorption experiments showed that applied negative potential increased adsorption kinetics and capacity in comparison with open-circuit potential (OCP) adsorption for $Co^{2+}$ and $Sr^{2+}$ ions. The adsorbed $Co^{2+}$ and $Sr^{2+}$ ions are released from the carbon fiber by applying a positive potential on the electrode, showing the reversibility of the sorption process. The possibility of application of the electrosorption technique to the separation of radionuclides was examined. The result of a selective removal experiments of a single component from a mixed solution showed that perfect separation of $Co^{2+}$ and $Sr^{2+}$ ions was possible by the electrosorption process.

• Journal of Environmental Science International
• /
• v.21 no.4
• /
• pp.479-488
• /
• 2012

A Dielectric barrier discharge (DBD) plasma is shown in the present investigation to be effective of phenol degradation in the aqueous solutions in batch reactor with continuous air bubbling. Removal of phenol and effects of various parameters on the removal efficiency in the aqueous solution with high-voltage streamer discharge plasma are studied. The effect of 1st voltage (80 ~ 220 V), air flow rate (3 ~ 7 L/min), pH (3 ~ 11), electric conductivity of solution (4.16 ${\mu}S$/cm, deionized water) ~ 16.57 mS/cm (addition of NaCl 10 g/L) and initial phenol concentration (2.5 ~ 20.0 mg/L) were investigated. The observed results showed that phenol degradation was higher in the basic solution than that of the acidic. The optimum values on the 1st voltage and air flow rate for phenol degradation were 140 V and 6 L/min, respectively. It was considered that absorbance variation of $UV_{254}$ of phenol solution can be use as an indirect indicator of change of the non-biodegradable organic compounds within the treated phenol solution. Electric conductivity was not influenced the phenol degradation. To obtain the removal efficiency of phenol and COD of phenol over 97 % (initial phenol concentration, 10.0 mg/L), 80 min and 120 min were need, respectively. Phenol and COD degradation showed a pseudo-first order kinetics.

• Journal of Environmental Science International
• /
• v.27 no.5
• /
• pp.299-308
• /
• 2018

The adsorption characteristics of Cu ions were studied using the zeolite Na-A synthesized from Jeju volcanic rocks. The effects of various operating parameters such as initial concentration of Cu ions, contact time, solution pH, and solution temperature were investigated in batch experiments. The adsorption of Cu ions by Na-A zeolite was fitted well by pseudo-second-order kinetics and the Langmuir isotherm model. The maximum adsorption capacity determined using the Langmuir isotherm model was 152.95 mg/g. In addition, the adsorption of Cu ions by zeolite Na-A was primarily controlled by particle diffusion model in comparison with the film diffusion model. As the temperature increased from 303 K to 323 K, ${\Delta}G^o$ decreased from -2.22 kJ/mol to -3.41 kJ/mol, indicating that the adsorption of Cu ions by Na-A zeolite is spontaneous process.

• Journal of Plant Biology
• /
• v.25 no.4
• /
• pp.153-160
• /
• 1982

The kinetics of $^{14}C$ fixation have been investigated in Anabaena flos-aquae growing on ${NH}_4+$,$NO_3-$ and $NO_2-N$ in batch cultures. Growth rate was highest with ${NH}_4+$, followed by $NO_2-$ and finally $NO_2$. The compensation intensity($I_0$) and the half-saturation irradiance($K_1$) with $K_1$ were higher than with other N sources, but the maximum C fixation rate($P_{max}$) was lower. The ($P_{max}$)/$K_1$ ratio, which is analogous to quantum efficiency at low irradiance ranges, was also lower with $N_2$. All these parameters except $K_1$ decrease with culture age, or decreasing growth rate. Since $^{14}C$ uptake measures net photosynthesis, the higher values of $I_0$ and $K_1$, and the low values of $P_{max}$/$K_1$ ratio with $N_2$ appear to be related to the high energy demand of $N_2$fixation. They may also be related to the lox maximum growth rate with $NO_2-N$.