• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2001.06a
• /
• pp.40-40
• /
• 2001

The sorption behavior of Cs(I), Sr(II), and U(VI) on representative single minerals(oxide and clay) and rocks were comparatively studied by using batch type sorption experiment. The effects of pH, ionic strength and the sorption mechanism were also discussed. It was found that mineral structure played as a main factor governing the sorption characteristics of Cs(I), Sr(II). The sorption of Cs(I) and Sr(II) on minerals showed ionic strength-dependency, which is a indirect sign of weak binding between metal cation and mineral surfaces. However, the sorption behavior of U(VI) was quite different compared with that of Cs(I), and Sr(II). Fe-oxide minerals showed strong tendency for U(VI) sorption, dominating the sorption in the composite/mixture systems. The surface characteristics which arise from mineral structure, and the affinity of metal ions to the sorption sites of minerals are the key to understand the role of minerals in the radionuclide sorption.

• Korean Journal of Materials Research
• /
• v.14 no.1
• /
• pp.59-66
• /
• 2004

In the present study, ceramic brake pads without fiber phases were manufactured by the low temperature heat treatment below$ 700 ^{\circ}C$. The manufacturing parameters of ceramic brake pads and those levels were investigated by the analysis results of signal-to-noise ratios, ANOVA based upon the Taguchi method. The ceramic brake pads prepared in the Mg experiment had a friction coefficient of 0.30～0.55 very close to the target coefficient (0.35～0.45) of commercial brake pads utilized in the automobiles. The frictional properties of ceramic brake pads could be stabilized with the adjustment of amounts of lubricating additives. The optimum preparation conditions as well as batch formulations for the fabrication of non-fibrous ceramic brake pads were finally determined using Taguchi method in this study.

• Journal of Environmental Health Sciences
• /
• v.25 no.3
• /
• pp.23-28
• /
• 1999

Phosphate removal through adsorbent, such as activated alumina, powdered aluminum oxide, flyash, blasted furnace slag and other materials, is commonly and widely practiced. The purpose of this study was to improve the removal efficiency of phosphorus in waste sludge earned at seafood processing factories. To investigate the utility and the feasibility of this sludge disposal process, experiment was carried out with a batch process. As a result, phosphate removal appears to increase with increasing adsorbent does, but shows no changes at an adsorbent does over 5g/l. With increasing ratios of initial phosphate concentration to adsorbent does, the amount of removed phosphate is increased while phosphate removal(%) is decreased. Wasted sludge, treated with zinc chloride chemically, represented a better efficiency than the untreated activated sludge and zinc chloride itself, when they reacted with phosphate solution.

• Proceedings of the IEEK Conference
• /
• 2003.07d
• /
• pp.1697-1700
• /
• 2003

The multi-user online game is a typical example of networked graphic applications. Increasing the reality of such a game requires the minimization of problems due to the network delay. In this paper, we propose a game architecture that reduces the network delay needed for message transfer, and a method for synchronization of game states in clients . The proposed game architecture is region proxy-based, and it can require a less network delay than a conventional client-server style that is usually used in commercial games. In our synchronization method, messages are processed in a batch-mode style and the number of rollbacks needed for synchronization significantly decreases. Our experiment shows that our method provides better performance than previous TSS (Trailing State Synchronization).

• Journal of environmental and Sanitary engineering
• /
• v.17 no.2
• /
• pp.40-47
• /
• 2002

In this study, water hyacinth plants(Eichhornia crassipes), water parsley(Oenanthe javanica) and Lemna paucicostate were used to treat contaminants such as COD, T-N and T-P in far m·fishing village wastewater. The results were as follows : In the batch system experiment, water hyacinth was showed at the high removal efficiency in the 173∼412kgCOD/ha·day concentration that is rather than 260mg/1 of the high concentration. The next is Oenanthe javanica, Lemna. Oenanthe javanica was showed the high removal efficiency in the 96∼173kgCOD/ha·day concentration that is less than 260mg/1 of the low concentration.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.277-284
• /
• 2004

Batch experiments were conducted to investigate the sorption and desorption behaviors of PAHs (naphthalene, phenanthrene and pyrene) in soils. Three different soils montmorillonite KSF (foc =0.14%), masato (foc =0.08%), and diatomite (foc =0.007%) were investigated. The results of sorption-desorption experiment indicate that the sorption affinity of PAHs was in the order of montmorillonite > masato > diatomite. The Freundlich model was well fitted to the sorption and desorption data. Sorption affinity increased as loc increased. Desorption of PAHs from soils was biphasic composed of reversible and irreversible compartments. Desorption-resistance of phenanthrene in soils was also determined. The biphasic desorption model was used to explain desorption-resistance of phenanthrene in soils. The linear term represents reversible sorption fraction and Langmuinian-type term represents desorption-resistant fraction.

• Transactions of Materials Processing
• /
• v.20 no.2
• /
• pp.124-131
• /
• 2011

A flexible stretch forming process is useful for small quantity batch production because various shape changes of the flexible die can be achieved conveniently. In this study, the design variables, namely, the punch size, curvature radius and elastic pad thickness, were quantitatively evaluated to understand their influence on sheet formability using statistical methods such as the correlation and regression analyses. Forming simulations were designed and conducted by a three-way factorial design to obtain numerical values of a shape error. Linear relationships between the design variables and the shape error resulted from the Pearson correlation analysis. Subsequently, a regression analysis was also conducted between the design variables and the shape error. A regression equation was derived and used in the flexible die design stage to estimate the shape error.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.6 no.1
• /
• pp.59-66
• /
• 1988

One of the rising problems in the field of environmental engineering is the eutrophic phenomenon which appears in the closed water basin. This study is the elimination orthophosphate by adsorption, which is indispensible nutritive element for eutrophication Ziriconium(IV) oxide hydrate-activatedcarbon complex. which has excellent adsorptivity for orthophosphate and can easily be reused after desorption process has been made and used as adsorbents. The main purpose of this study is to obtain intraparticle diffusivity which is basic data for the design of adsorption operation the experimental results were as follows. 1. Optimum condition which gave maxinum adsorption of orthophosphate was ph5 2. Equilibrium adsorption showed good consistency with Freundlich type. q=10.80C1/2.08 3. Pore diffusivity and surface diffusivity obtained the kinetic experiment of batch adsorption were respectivity 5.38 and 2.06 ($\textrm{cm}^2$/sec)

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.94-101
• /
• 2017

Recently, the small quantity batch production method has come into the spotlight as there are more plastic processing methods. At the same time, the 3D printer market has become globally widespread due to expired 3D printer patents. In particular, the FDM method is widely used for cheap products and materials. However, the FDM scheme is not as good as the injection molding method for quality and strength. This study investigated the effect of the internal filling and strength according to layer thickness to search for the optimum printing of the factors (infill and layer thickness) that determine the strength of the model.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.05a
• /
• pp.11-14
• /
• 2000

Wastewater sludge and composted food wastes were examined as the alternatives of a landfill cover for soils to eliminate the emission of VOCs. The benefit of these alternatives is in their high sorption capacity, which is 5 to 50 times higher than natural soils. After sorption is finished, biodegradation is an important mechanism in decrease of VOCs concentration. In order to investigate appropriate VOCs degradation condition, biodegradation batch experiment is being conducted with isolated strain X9-c. Both benzene and TCE were degraded only in soil with 12%(water volume/sorbent volumn) water condition. When the water condition varied from 12 to 48% in compost, optimum water conditions of composted food waste was 36%.