• Title/Summary/Keyword: basis conversion

Search Result 376, Processing Time 0.025 seconds

GaN-HEMT 기반 Anyplace Induction Cooktop용 전력변환장치 설계 및 성능 검증 (Design and Hardware Verification of Power Conversion System for GaN-HEMT Based Anyplace Induction Cooktop)

  • 권만재;장은수;박상민;이병국
    • 전력전자학회논문지
    • /
    • 제25권6호
    • /
    • pp.451-458
    • /
    • 2020
  • In this study, a trade-off analysis of a power conversion system (PCS) is performed in accordance with a power semiconductor device to establish the suitable operating frequency range for the anyplace induction heating system. A resonant network is designed under each operating frequency condition to compare and analyze the PCS losses depending on the power semiconductor device. On the basis of the simulation results, the PCS losses and frequency condition are calculated. The calculated results are then used for a trade-off analysis between Si-MOSFET and GaN-HEMT based on PCS. The suitable operating frequency range is determined, and the validity of the analysis results is verified by the experiment results.

신라사천왕사건축(新羅四天王寺建築)의 조영척도(造營尺度) 재론(再論) (Rediscussion of the Architectural construction measure of the Sacheonwangsa Temple in Silla)

  • 이정민;미조구치 아키노리
    • 건축역사연구
    • /
    • 제28권5호
    • /
    • pp.43-58
    • /
    • 2019
  • After the study of Fujishima Gaijiro(1930), although it is common to see that the Tang-ruler(唐尺) was used in the construction of the Silla Sacheonwangsa temple(679), the basis of the discrimination of the construction measure and the detection of the unit length is not actually sufficient since conventional research was done before the excavation. The study was based on archaeological results, which was secured through the excavation research(2006~2012) of the temple site in recent years, to determine the construction measure and try to detect the unit length. In the analysis of the measured value of the ruins, the numerical data were obtained through measurements on drawings of the ruins, the tendency of conversion measure's number appearing by dividing each unit length of the Goguryeo-ruler(高句麗尺) and Tang-ruler within a certain range was compared from the Wansu-je(完數制) viewpoint. The research results are summarized as follows : 1)As a result of the analysis of the distance between the site's center, the case that conversion Cheok's(尺) number is converged to the unit of Jang(丈) within the range of unit length expresses three times more in Tang-ruler, and it is confirmed that a simple multiple relationship based on the unit of Jang is established between conversion Cheok's number. 2)As a result of analysis of Bokan(梁間) of the each Corridor site and the measured value of the stonework ruins, it could be confirmed that appears overwhelmingly in the Tang-ruler when conversion Cheok's number becomes an integer within the range of unit length. The results of the analysis are judged to be a clear basis for viewing the Tang-ruler as the construction measure of the Sacheonwangsa temple. 3)The estimated unit lengths of the construction measure that were obtained from the analysis of the distance between the site'scenter, the foundation stone center distance of the building site and the measured value of the stonework ruins are slightly different. There is a limit to the verification of the construction error about this, however it is difficult to specify, it is mentioned 294.37mm which is obtained from the analysis of the distance between the site's center.

GF($2^m$)상의 승산기 구성에 관한 연구 (A study on the multiplier for finite field GF($2^m$))

  • 원동호;김병찬
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
    • /
    • pp.845-849
    • /
    • 1987
  • Finite field arithmetic logic is central in the implementation of Reed-Solomon coders and in some cryptographic algorithms. There is a need for good multiplication and basis conversion algorithms. In this paper, a new multiplication circuit is developed for the finite field GF($2^m$) based on a conventional basis. It is composed of AND gates and EXCLUSIVE-OR gates and is regular, simple, expandable and therefore, naturally suitable for VLSI implementations.

  • PDF

A study on modeling and measuring method of tire weight imbalances and improving reliability (ICCAS 2004)

  • Lee, Ki-Seong;Jeong, Tae-Woon
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2004년도 ICCAS
    • /
    • pp.1685-1688
    • /
    • 2004
  • I propose a modeling of a mechanism for weight fire uniformity measurement of a tire and a way I interpret a Sampling signal by Loadcell through an analysis, and to measure fire uniformity in this study. Correct a weight fire uniformity measurement was possible through the production of conversion and influence factor of a signal with a basis with the model who was an oscillation mechanics enemy.

  • PDF

친환경유기농업 육성정책의 성공조건 (A Condition Success for Development of Policy Organic Agricultural)

  • 유덕기
    • 한국유기농업학회지
    • /
    • 제14권4호
    • /
    • pp.341-360
    • /
    • 2006
  • The paper describes condition success for the development and policy environment of organic farming in Korea. policy measures concerning area-based financial support for conversion to and continuation of organic farming, officially-recognized standards and support for market and regional development, advice and research are considered. This indicates that individual measures can also work against each other. In some region, good experiences habe been made with integrated action plan, an approach that is also being discussed at the national level and which could achieve a good basis for the development of Bio-farming in future.

  • PDF

Risk Assessment for Noncarcinogenic Chemical Effects

  • Kodell Ralph L.
    • 대한예방의학회:학술대회논문집
    • /
    • 대한예방의학회 1994년도 교수 연수회(환경)
    • /
    • pp.412-415
    • /
    • 1994
  • The fundamental assumption that thresholds exist for noncarcinogenic toxic effects of chemicals is reviewed; this assumption forms the basis for the no-observed-effect level/ safety-factor (NOEL/SF) approach to risk assessment for such effects. The origin and evolution of the NOEL/SF approach are traced, and its limitations are discussed. The recently proposed use of dose-response modeling to estimate a benchmark dose as a replacement for the NOEL is explained. The possibility of expanding dose-response modeling of non carcinogenic effects to include the estimation of assumed thresholds is discussed. A new method for conversion of quantitative toxic responses to a probability scale for risk assessment via dose-response modeling is outlined.

  • PDF

적응적 탐색기반 움직임 추정을 사용한 프레임 율 변환 알고리즘 (Frame Rate Conversion Algorithm Using Adaptive Search-based Motion Estimation)

  • 김영덕;장준영;강문기
    • 대한전자공학회논문지SP
    • /
    • 제46권3호
    • /
    • pp.18-27
    • /
    • 2009
  • 본 논문에서는 적응적 탐색기반 움직임 추정을 사용한 프레임 율 변환(FRC : Frame Rate Conversion) 알고리즘을 제안한다. 제안된 움직임 추정은 회귀탐색, 삼 단계탐색(3-SS : 3-Step Search), 그리고 단일예측탐색을 복합적으로 사용하며, 이 세 가지 탐색기법 중 블록 별 영역 특성에 가장 적합한 탐색 기법을 적용한다. 이러한 적응적 탐색방법을 적용함으로써 계산 량의 증가를 억제하면서 움직임 추정의 정확도를 향상시킨다. 이를 위해 제안된 기법에서는 시간적 예측을 통해 영상전체를 블록 별 움직임 종류에 따라 3가지 영역으로 분할한다. 제안된 움직임 추정기법을 사용한 프레임 율 변환 알고리즘은 기존 알고리즘에 비해 주관적 및 객관적인 면에서 모두 뛰어난 결과를 보임을 실험을 통해 확인 할 수 있다.

피치 기반 사운드-컬러이미지 변환에 관한 기초연구 (A Basic Study on the Pitch-based Sound into Color Image Conversion)

  • 강건우;김성일
    • 감성과학
    • /
    • 제15권2호
    • /
    • pp.231-238
    • /
    • 2012
  • 본 연구는 하나의 감각으로 인해 다른 영역의 감각을 불러일으키는 공감각 현상을 기초로 하여 사운드에서 컬러이미지를 유추하여 생성하는 응용 시스템의 구현을 최종 목표로 한다. 이를 위해 사운드의 특징정보인 기본주파수(F0, Fundamental Frequency)에서 음계(Scale) 및 옥타브(Octave) 성분을 추출한 후, HSI 컬러모델인 색상(Hue), 명도(Intensity) 성분에 각각 매핑한다. 본 논문에서 채도(saturation)값은 고정된 값을 사용한다. 이를 다시 RGB 컬러모델로 변환한 후 최종 BMP 포맷으로 컬러 이미지를 출력한다. 본 연구에서 제시한 사운드-컬러이미지 변환 방법을 토대로 기본 변환 시스템을 구현해 본 결과, 기본주파수에서 추출된 음계 및 옥타브 성분의 변화에 따라 색상 및 명도가 상이한 다양한 컬러가 나오는 것을 확인할 수 있었다. 또한 하드웨어적 구현을 위해 TMS320C6713 DSP Board에 포팅하여 실험한 결과 제안된 시스템의 시뮬레이션 결과와 동일한 컬러 이미지가 출력됨을 확인하였다.

  • PDF

Cost-Per-Action 광고 방법을 이용한 Conversion Action Data 메커니즘의 평가 (Evaluation of Conversion Action Data Mechanisms in Cost- Per-Action Advertising)

  • 이첨;이경전
    • 경영정보학연구
    • /
    • 제10권2호
    • /
    • pp.123-135
    • /
    • 2008
  • 온라인 광고모델의 기본 모델은 CPM (cost-per-mille) 기반 모델에서 CPC (cost-per-click) 기반 모델로 변화해왔으며, CPA (cost-per-action) 모델이 온라인 광고산업의 새로운 대안 모델로 제시되고 있다. CPA 모델에서는 사용자가 어떤 광고를 클릭 했는지에 관한 정보를 퍼블리셔(Publisher)가 보유할 수 있어야 하며, 그래서, CPA 모델의 핵심은 Conversation Action Data를 확보하는 것이다. 이 논문에서는 이를 획득하는 두 가지 기존 메커니즘을 소개하고, 이들의 특징을 비교하고, 각 메커니즘의 한계를 분석한다. 그 다음에 두 가지 새로운 메커니즘을 설계하고, 작동 요건을 분석하고, 실용성을 평가한다. 마지막으로, 기존의 메커니즘들과 새로운 메커니즘들의 특징을 비교하고, 각 메커니즘의 비즈니스 가치와 유용성, 응용 범위를 분석한다. 이 논문에서 제안된 2가지의 새로운 메커니즘과 기존 메커니즘과 비교 분석을 통해 퍼블리셔에게 최적 CPA 메커니즘에 관한 판단정보를 제공할 수 있을 것으로 판단된다.

DEVELOPMENT OF A SUPERCRITICAL CO2 BRAYTON ENERGY CONVERSION SYSTEM COUPLED WITH A SODIUM COOLED FAST REACTOR

  • Cha, Jae-Eun;Lee, Tae-Ho;Eoh, Jae-Hyuk;Seong, Sung-Hwan;Kim, Seong-O;Kim, Dong-Eok;Kim, Moo-Hwan;Kim, Tae-Woo;Suh, Kyun-Yul
    • Nuclear Engineering and Technology
    • /
    • 제41권8호
    • /
    • pp.1025-1044
    • /
    • 2009
  • Systematic research has been conducted by KAERI to develop a supercritical carbon dioxide Brayton cycle energy conversion system coupled with a sodium cooled fast reactor. For the development of the supercritical $CO_2$ Brayton cycle ECS, KAERI researched four major fields, separately. For the system development, computer codes were developed to design and analyze the supercritical $CO_2$ Brayton cycle ECS coupled with the KALIMER-600. Computer codes were developed to design and analyze the performance of the major components such as the turbomachinery and the high compactness PCHE heat exchanger. Three dimensional flow analysis was conducted to evaluate their performance. A new configuration for a PCHE heat exchanger was developed by using flow analysis, which showed a very small pressure loss compared with a previous PCHE while maintaining its heat transfer rate. Transient characteristics for the supercritical $CO_2$ Brayton cycle coupled with KALIMER-600 were also analyzed using the developed computer codes. A Na-$CO_2$ pressure boundary failure accident was analyzed with a computer code that included a developed model for the Na-$CO_2$ chemical reaction phenomena. The MMS-LMR code was developed to analyze the system transient and control logic. On the basis of the code, the system behavior was analyzed when a turbine load was changed. This paper contains the current research overview of the supercritical $CO_2$ Brayton cycle coupled to the KALIMER-600 as an alternative energy conversion system.