• 한국전자파학회논문지
• /
• 제18권1호
• /
• pp.15-23
• /
• 2007

본 논문에서는 six-port 위상 상관기와 신호 검파부 그리고 I 및 Q 채널 신호를 복조하는 간단한 구조를 갖는 six-port 직접 변환 QPSK 수신기를 설계하고 제작하였다. Six-port 위상 상관기의 출력 단자간 출력 위상 신호를 해석하고, 출력 단자 신호 간 $90^{\circ}C$ 위상 관계로부터 QPSK신호를 복조하는 간단한 회로의 직접 변환 수신기 구조를 갖는다. Six-port 위상 상관기는 $90^{\circ}C$ 하이브리드 branch line 및 전력 분배기를 가지며, $11.7{\sim}12.0\;GHz$ 주파수 대역에서 설계된 six-port 위상 상관기의 출력 신호는 $^{\circ}$ 이내의 양호한 위상 오차 특성을 갖는다. 또한 직접 변환 수신기 구성 소자간 양호한 정합도 및 진폭 특성에 의해 약 $5^{\circ}$ 이내의 위상 오차를 갖는 I, Q 데이터를 복원하였다.

• Journal of Power Electronics
• /
• 제5권3호
• /
• pp.233-239
• /
• 2005

In this paper, a new conceptual circuit configuration of a 3-phase voltage source, soft switching AC-DC-AC converter using an IGBT module, which has one ARCPL circuit and one ARDCL circuit, is presented. In actuality, the ARCPL circuit is applied in the 3-phase voltage source rectifier side, and the ARDCL circuit is in the inverter side. And more, each power semiconductor device has a novel clamp snubber circuit, which can save the power semiconductor device from voltage and current across each power device. The proposed soft switching circuits have only two active power semiconductor devices. These ARCPL and ARDCL circuits consist of fewer parts than the conventional soft switching circuit. Furthermore, the proposed 3-phase voltage source soft switching AC-DC-AC power conversion system needs no additional sensor for complete soft switching as compared with the conventional 3-phase voltage source AC-DC-AC power conversion system. In addition to this, these soft switching circuits operate only once in one sampling term. Therefore, the power conversion efficiency of the proposed AC-DC-AC converter system will get higher than a conventional soft switching converter system because of the reduced ARCPL and ARDCL circuit losses. The operation timing and terms for ARDCL and ARCPL circuits are calculated and controlled by the smoothing DC capacitor voltage and the output AC current. Using this control, the loss of the soft switching circuits are reduced owing to reduced resonant inductor current in ARCPL and ARDCL circuits as compared with the conventional controlled soft switching power conversion system. The operating performances of proposed soft switching AC-DC-AC converter treated here are evaluated on the basis of experimental results in a 50kVA setup in this paper. As a result of experiment on the 50kVA system, it was confirmed that the proposed circuit could reduce conduction noise below 10 MHz and improve the conversion efficiency from 88. 5% to 90.5%, when compared with the hard switching circuit.

• 한국지반신소재학회논문집
• /
• 제19권4호
• /
• pp.33-40
• /
• 2020

최근 대규모 택지개발 현장에서 굴착공정 중 매립폐기물이 발견되는 사례가 빈번히 발생되고 있다. 발생된 매립폐기물을 환경적으로 처리하기 전에는 대상지역의 개발사업을 진행할 수 없으며, 매립폐기물에 대한 처리대책을 수립하여 환경적이고 경제적으로 처리하여야 한다. 본 연구에서는 매립폐기물의 처리에 있어 단가 산정의 기본적인 계수가 되는 매립폐기물의 겉보기밀도와 체적환산계수의 상관관계를 분석하고자 하였다. 이를 위하여 ◯◯지역의 사용종료 매립지 10지점에서 매립폐기물을 채취하여 물리적성상을 분석한 후, 성상별 및 혼합폐기물의 겉보기밀도를 측정하였다. 매립폐기물의 겉보기밀도와 체적 환산계수의 상관관계를 분석하기 위하여, 매립폐기물의 겉보기밀도로부터 유추한 체적환산계수와 실측한 체적환산계수, 경험식에 의한 체적환산계수를 비교하였다. 분석결과, 겉보기밀도로부터 유추한 체적환산계수, 경험식에 의한 체적환산계수, 그리고 실측한 체적환산계수는 일정한 상관관계를 나타내고 있어, 겉보기밀도와 체적환산계수에 관한 기초자료로서 활용할 수 있을 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제32권5호
• /
• pp.45-50
• /
• 2004

현재 국내의 목구조 설계는 ASD (Allowable Structural Design)에 기초하여 이루어 지고 있다. 그러나 이 설계 방법은 재료의 변이와 설계에 따른 다양한 조건물을 충분히 고려하고 있지 못하고 있어 과설계의 원인이 되고 있다. 따라서 외국의 경우는 이를 극복하기 위하여 1990년 초반부터 확률론적인 접근을 통한 설계에 대한 연구가 꾸준히 진행되어 왔으며, 현재는 이에 기초한 설계 기준을 마련, 활용하고 있는 실정이다. 그러므로 본 연구에서는 국산재에 이러한 설계법을 도입하기 위하여 기존 연구에서 밝혀진 제재목과 집성재의 강도적 성능에 대한 분포 특성을 충분히 고찰하여 평균, 표준 편차, 분산, 변이 계수 동의 인자를 얻었고, 이를 통해서 국산낙엽송부재에 대해서 기존의 ASD 코드를 RBD (Reliability Based Design) 코드로 전환하여 기본적인 코드 전환 체계를 갖추고자 하였으며. RBD 코드로의 전환 시 따르게 되는 중요 변수 즉 시편 수에 대한 고찰을 하였다. 또한, 적어도 각 시편에 대해서 적어도 500개 이상의 반복수가 있어야만 어느 정도 정확한 값을 얻을 수 있음을 확인할 수 있었다.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.809-813
• /
• 2010

Although the goals of HL7 Version 2(V2) and Version 3(V3) are identical, the concepts of the implementation and technological basis are different; this makes their versions inconvertible. This problem interrupts technological innovation advanced from V2 to V3 and has been raised as a new type of barrier in the field of medical information system. This study intends to develop software to convert V2 to V3 which can be utilized in the actual medical environment. Since it is practically difficult to develop the whole tools that automatically change total V2 messages into V3 messages, this article has designed, implemented, and tested the software that allows mapping between V2 and V3 which function as tools. In order to test this program, it has used ADT^A03 of five V2 messages to generate V3 messages. It is expected that the result of this research will be one of the new methods allowing conversion between V2 and V3.

• 한국실내디자인학회논문집
• /
• 제16권2호
• /
• pp.63-70
• /
• 2007

Analogy in problem solving is similarity-based reasoning facilitated by verbal and visual operation. This similarity-based reasoning generally supports initial phase of idea search. Therefore, this study intends to infer the types of problem solving by tracing the analogy use of verbal and visual representation through a experimental research. According to the result of this research, the types of problem solving by analogy are classified into 'evolving', 'divergent', and 'poor conversion' type. Firstly, 'evolving type' is distinguished between 'combination type' associated different contents to develope a new design and 'transformation type' associated similar words and sketches to be continuously revised and developed. In these types usually structural analogy rather than surface analogy is used. Secondly, in 'divergent type' associated words or sketches are individually represented, and among them one design solution is selected. In this type usually surface analogy is used. Thirdly, in 'poor conversion type' interaction between verbal representation and visual representation does not go on smoothly, and the generation of idea is poor. In here surface analogy is mostly used. These findings could form the basis of skill development of idea generation and conversion in design education.

• 융합신호처리학회논문지
• /
• 제1권2호
• /
• pp.131-137
• /
• 2000

본 논문은 소프트웨어 무선에 적합한 전송장치로써 로직회로에 의해 생성되어지는 디지털신호를 직접 무선으로 변환시킬 수 있는 디지털-무선 변환장치를 제안한다. 이러한 회로가 실현되어지면 변조회로, RF회로와 안테나를 1개의 간단한 디바이스로 실현할 수 있어 소프트웨어무선의 본질인 소프트웨어처리에 의한 무선의 제어를 직접 수행할 수 있게 된다. 본 논문의 디지털-무선 변환장치는 채널화용 PN코드가 부여하는 위상각도에 의해 무수히 많은 채널화를 기할 수 있으며 디지털화에 의하여 설계에 유연성을 주게 되므로 하드웨어의 비중을 최소화시키고 소프트웨어 베이스의 유연한 기능을 갖는다.

• 통상정보연구
• /
• 제10권2호
• /
• pp.283-304
• /
• 2008

According to globalization and localization of world economics international trade payment method was also changed. A traditional payment was Letter of Credit basis, however it is being increased to various methods such as remittance, documentary collection(D/P, D/A) and open account. In order to acquire a secure export payment, exporters prefer to L/C basis which is guaranteed by a reliable bank. However, the L/C should bear a security so that importers would rather documentary collection than L/C. The reasons for the preference of collection payment rather than L/C are a low commission cost, the conversion of buyer's market from seller's market due to severe competition in the world market, transaction increase between main office and branches and a right to control the goods until executing the payment by exporters. Besides of them, collection payment can handle safer and faster than open account basis. However, the collection payment has a risk which it isn't guaranteed by bank for the payment so that I would suggest countermeasures to minimize the payment risk utilizing the collection basis as follows; using export credit insurance system, a large domestic credit report provider such as D&B for absolutely fresh and new information, a collection proxy service for overseas deferred credit and suggestion specifying to order B/L not straight one on consignee in order to transfer the right of ownership with endorsement without problem.

• 한국전문물리치료학회지
• /
• 제11권4호
• /
• pp.43-49
• /
• 2004

It is not common in rehabilitation situation to encounter patients exhibiting paralysis or other disabilities which have no apparent organic basis. Even without organic causes for their signs and symptoms these patients often require comprehensive treatment and management. Patients with conversion disorder often pose particular difficulties because of diagnostic confusion and the lack of therapeutic strategies for rehabilitation management. We feel that systematic functional rehabilitation is helpful in resolving symptom and recovering normal function in the patient suffering from conversion disorder since it provides motivation and reduces reinforcements which contribute to sustained disabled state. This report describes the patient with hysterical motor paralysis who is successfully treated with structured physical therapy. The objectives of this report are to provide therapeutic guidelines for physical therapy and to emphasize the role of physical therapist in the assessment and treatment of hysterical paralysis.

• International Journal of Automotive Technology
• /
• 제8권3호
• /
• pp.361-373
• /
• 2007

In previous work, an approach based on maximizing the efficiency of an internal combustion engine while ignoring the power conversion efficiency of other powertrain components, such as the electric motor and power battery or ultracapacitor, was implemented in the steady-state optimization of an internal combustion engine for hybrid electric vehicles. In this paper, a novel control algorithm was developed and successfully justified as the basis for maximal power conversion efficiency of overall powertrain components. Results indicated that fuel economy improvement by 3.9% compared with the conventional control algorithm under China urban transient-state driving-cycle conditions. In addition, using the view of the novel control algorithm, maximal power generation of the electric motor can be chosen.