• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.303-313
• /
• 2015

This study investigates the physicochemical, microbiological and sensory characteristics of seasonal salted-Kimchi cabbages to provide basic data on its uniform quality. Generally, seasonal salted-Kimchi samples had different pH values at initial storage periods, but there was no difference in pH between the seasonal samples when stored for longer periods. The samples from the fall and winter seasons were relatively low in acid and high in solid soluble content compared to samples from other seasons. Salted-Kimchi cabbages in the summer showed the highest microbiological number compared to samples from other seasons. In the sensory evaluation, there were differences in the appearance, aroma, and taste, depending on seasonal samples at different storage periods. The correlation coefficient between the quality characteristics in the seasonal samples showed a positive or negative correlation between the quality characteristics at 1% significant level. In the principal component analysis, F1 and F2 were shown the 51.81% and 14.23% of the total variance (66.21%), respectively. In the PCA pattern of seasonal salted-Kimchi cabbages during storage periods, winter samples were distributed on the top of F2, spring samples were in the middle of F2, while the rest of the samples were distributed on the bottom of F2. According to increasing storage periods, initial storage samples were distributed at the left of F1, while other samples were located at the right of F2.

• Journal of dental hygiene science
• /
• v.13 no.4
• /
• pp.510-517
• /
• 2013

This study was carried out in order to be utilized as basic data necessary for developing dental hygiene curriculum by confirming the difference in propensity level and the variables of having influence upon problem-solving ability of dental hygiene students and by grasping influence of relevant variables at the point of time that requires arrangement of a learning system for promoting problem solving ability aiming to train talents who have ability available for performing successful practical affairs. The influence of factors upon the problem solving ability had statistically significant relationship with academic year, interpersonal relations, school record, and major satisfaction. According to academic year, the problem solving ability of sophomore (B=-0.182, p=0.010) was shown the lower tendency than junior. The problem solving ability was lower in when being bad (B=-0.349, p=0.020) compared to when being good as for interpersonal relations, in when the mark is under 3.0 (B=-0.328, p=0.004) than over 4.0 as for academic achievement, and in when being dissatisfied (B=-0.483, p=0.005) than when being satisfied as for the major satisfaction. Hence, to train competent people who have ability available for performing successful practical affairs, the education is considered to be likely needed that has substantial problem solving ability for reinforcing problem solving ability by grasping a learning problem oneself without the differentiated curriculum, by establishing an alternative plan for solving problem, and by searching for and acquiring necessary data according to factors of having influence upon problem solving ability of dental hygiene students.

• Korean Journal of Environment and Ecology
• /
• v.24 no.2
• /
• pp.209-221
• /
• 2010

This study was carried out to apply basic data of the native trees for planting in the salinity area by the vegetation ecological selection. Which focused on native woody species to the tolerances of saline soil and salt spray drift on the coastal forests in the West-Sea, Korea. The soil salinity($EC_{1:5}$) was 0.11dS$m^{-1}$, ranging of 0.00dS$m^{-1}$~0.68dS$m^{-1}$. The soil salinity was gradually decreasing from Belt I to Belt Ⅳ except the Belt I in some coastal windbreaks. The order of decreasing soil salinity was Belt I>Belt II>Belt III>Belt Ⅳ and the soil salinity was $EC_{1:5}$ 0.14dS$m^{-1}$, 0.11dS$m^{-1}$, 0.10dS$m^{-1}$, and 0.08dS$m^{-1}$, respectively. The total 181 taxa consisted of 52 families, 104 genus, 157 species, and 24 varieties were recorded as the trees tolerating to both soil salinity and salt spray drift. The trees emerged in the highest degree of salinity($EC_{1:5}$ 0.51dS$m^{-1}$) was nothing but appearanced Pinus thunbergii Parl., Smilax china L., Quercus dentata Thunb. ex Murray, Quercus serrata Thunb. ex Murray and so on at the level of singular and ideal value. The emerged trees in the high salinity of $EC_{1:5}$0.41dS$m^{-1}$~0.50dS$m^{-1}$ were Albizia kalkora Prain, Melia azedarach L., Paederia scandens (Lour.) Merr. var. scandens These species were trees of tolerance to saline soil. The emerged woody species in all belts were Pinus rigida Mill., Pinus densiflora Siebold & Zucc., Pinus thunbergii Parl., Juniperus rigida Siebold & Zucc. and so on. The woody species with high important value(I.V.) were Pinus densiflora Siebold & Zucc., Pinus thunbergii Parl., Pseudosasa japonica (Siebold & Zucc. ex Steud.) Makino, Smilax china L., Platycarya strobilacea Siebold & Zucc. var. strobilacea for. strobilacea and so on, which can be classified as highly tolerant native trees to salt spray drift.

• Korean Journal of Agricultural Science
• /
• v.20 no.1
• /
• pp.68-87
• /
• 1993

Data acquisition system and computer program developed in this study could be well used in engine vibration analysis. The system and program developed were also operated to be able to control measuring interval, number of channels, number of data. The flywheel was specially studied to provide the proper weight with rubber damper for the engine design at low level of vibration. This study was conducted to obtain basic data which affect the engine vibration. The experiment of this study was performed on original weight flywheel, weight-reduced flywheel, weight-reduced and rubber-coated flywheel, weight-reduced and damper-attached flywheel. Avarage of peak value, maximum vibration, power spectrum density based on FFT analysis are major factors of this experiment. Results were obtained as follows : 1. When rubber was inserted in the flywheel rim of which weight was reduced from 32.2kgf to 24.4kgf, maximum vibration of the engine was decreased 48.3% at X axis, 35.5% at Y axis and 34.6% at Z axis in comparison with the flywheel of original weight. 2. When the flywheel of rubber damper was compared with the original flywheel, the average of absolute vibration for rubber damped flywheel was decreased at X, Y, Z axis and especially its decreasing rate was so high at X-axis comparing with the other flywheel, which implied that rubber damper was very useful to reducing the vibration of the engine at X axis. 3. Hysteresis losses of X, Y, Z axis were greatly decreased in the flywheel with rubber damper on rim. 4. Damped oscillation effect on X and Y axis vibration above average peak vibration by the flywheel of rubber damper on rim was larger than those by the other flywheels. 5. Power spectrums of vibration at real and imaginery part were bi-mode type. The vibration frequency of rubber dampered flywheel which weight is decreased was slightly increased as compared with original flywheel.

• Korean Journal of Agricultural Science
• /
• v.36 no.1
• /
• pp.73-85
• /
• 2009

An investigation was conducted to get the basic data for establishing structural safety and environmental management of tomato greenhouses in Chungnam region. The contents of the investigation consisted of actual state of greenhouse structures and environmental control facilities. Most of greenhouses were arch type single-span plastic houses and they had too low height for growing tomatoes. Frameworks of multi-span greenhouses were suitable, but those of single-span were mostly insufficient. Every greenhouse had thermal curtain movable or covering fixed inside the greenhouse for energy saving, and heating facilities were mostly warm air heater. Irrigation facilities were mostly drip tube and controlled by manual operation or timer. Almost all of the greenhouses didn't install high level of environmental control facilities such as ventilator, air circulation fan, $CO_2$ fertilizer, insect screen, supplemental light, and cooling device.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.6
• /
• pp.177-187
• /
• 2016

This study started with the question, "Is the cost of landscape construction work in residential areas measured by public enterprises, 'in response to the needs of consumers?" The study analyzed whether the landscape construction expenditure is being introduced at an appropriate ratio according to the value the residents have regarding landscape elements. Following this, research was conducted for the purpose of providing basic data for improving the efficiency of formulating apartment landscape construction costs in the future. This research proceeded based on a questionnaire survey of residents of apartments, and the content of the questionnaire used frequency analysis and descriptive statistics research methods. To take a look at a comparative analysis of value recognition, in particular, a comparative analysis was performed based on the actual input cost based on the ratio of landscape elements by layer. Conclusions were found as follows: First, the degree of interest in the apartment landscape of the tenants was high, and the value of the landscape was high but realistic satisfaction appeared comparatively low. Second, the awareness of residents' values regarding landscape elements appeared to give "plantings" more value than "facilities". Thirdly, as a result of a mutual comparison between the values recognized by the resident regarding landscape elements and the construction input fee, depending on the landscape elements, it appeared that there is a difference in the ratio of up to 52 times from 1.25. Fourth, the fact that there is a difference in the relative proportion of value recognition and inputting construction cost indicates that it is not possible to respond to the needs of tenants during the construction cost development process. It also shows that the utility of inputting construction costs is low. Therefore, a macro-level examination such as reflecting the existing inflation rate is necessary to develop the efficient landscape construction cost of apartment such as the awareness of the value of the residents regarding landscape elements, out of the customary construction cost formulation method based on the microscopic dimensions of the consumer side.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.4
• /
• pp.43-53
• /
• 2005

This study is to define how the difference of athletic change influence on the last regrasp after somersault in Belle movement of parallel bars. For his study, the following conclusion was produced by analysis of athletic change by means of three dimensional visual image in three athlete of nation. 1. As the picture of S1, there are total used time(2.01 sec), S3(2.17 sec) and S2(2.19 sec). In case of a short needed time, it is difficult for them to perform the remaining movement of the vertical elevating flight easily and comfortably, it is judged as performing the small movement with restrict swing. 2 In the change of body center sped by each event, it is calculated as $-89.1^{\circ}$ the narrowest in S1, $-81.96^{\circ}$ the widest and then $86.34^{\circ}$ in S3. In E3 event, average compound speed is 4.07m/s, S2 showed the fastest speed of 4.14m/s whereas S1 the narrowest angle of 3.95m/s. 3. A shoulder joint and coxa are the period of mention in E3. In E4 which was pointed out the longest vertical distance, S2 that is indicated the highest vertical height as the period of detach in parallel bars. showed -3.91m. This is regarded as a preparatory movement for dynamic performance after using effectively elastic movement of shoulder joint and coxa while easily going up with turning back movement. In the 5th phrase, long airborne time and vertical change position is showed as the start while regrasping securely air flight movement from high position. 4. In E5, a long flight time and a long vertical displacement were shown as the regrasp after somersault efficiently in high position with stability from the point of the highest peak of the center of the body. Especially, S2 is marked as a little bit long position, while S1 is reversely indicated as performing somersault and unstable motion in a low position. 5. In E3, at the point of the largest extension of the shoulder joint and hip joint the shoulder joint is largely marked in $182^{\circ}$ and the hip point $182^{\circ}$ in S2. The shoulder joint is marked at the smallest angle in $177^{\circ}$ and the hip point $176^{\circ}$ in S1. And S1 is being judged by its performance of the less self - confident motion with lessening a breath of swing. S2 makes the most use of flexion and extension of the shoulder joint and the hip joint effectively. It was performed greatly with swinging and dropping the rotary movement and the rotary inertia naturally. 6. In E6, as the point of regrasp of the upper arm in parallel bars it is recognized by the that of components of vertical and horizontal velocity stably. During this study, the insufficient thing and the study on the parallel bars at a real game later are more activated than now. If it is really used as the basic materials by means of Belle Picked Study of Super E level after Bell movement, you may perceive the technique movement previously and perform without difficulty. Especially, such technique as crucifix is quite advantageous for oriental people thanks to small body shape condition. In conclusion we will nicely prepare for our suitable environment to gradually lessen trials and errors by analyzing and studying kinematically this movement.

• Korean Journal of Microbiology
• /
• v.41 no.1
• /
• pp.67-73
• /
• 2005

Photoautotrophic bacteria are promising candidates for the production of poly(3-hydroxybutyrate) (PHB) since they can address the critical problem of substrate costs. In this study, we isolated 25 Tn5-inserted mutants of the Synechocystis sp. PCC 6803 which showed enhanced PHB accumulation compared to the wild-type strain. After 5-days cultivation under nitrogen-limited mixotrophic conditions, the intracellular levels of PHB content in these mutants reached up to $10-30\%$ of dry cell weight (DCW) comparable to $4\%$ of DCW in the wild-type strain. Using the method of inverse PCR, the affected genes of the mutants were mapped on the completely known genome sequence of Synechocystis sp. PCC 6803. As a result, the increased PHB accumulation in 5 mutants were found to be resulted from defects of genes coding for NADH-ubiquinone oxidoreductase, O-succinylbenzoic-CoA ligase, photosystem II PsbT protein or histidine kinase, which are involved in photosystem in thylakoid inner membrane of the cell. The values of $NAD(P)H/NAD(P)^+$ ratio in the cells of these mutants were much higher than that of the wild-type strain as measured by using pulse-amplitude modulated fluorometer, suggesting that PHB synthesis could be enhanced by increasing the level of cellular NAD(P)H which is a limiting substrate for NADPH-dependent acetoacetyl-CoA reductase. From these results, it is likely that NAD(P)H would be a limiting factor for PHB synthesis in Synechocystis sp. PCC 6803.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.1
• /
• pp.97-106
• /
• 1984

The Antarctic krill, Euphausia superba, is drawing attention over the world as the largest source of unutilized proteins in the ocean. For the use of krill as a human food, processing conditions of krill sauce by autolysis and/or commercial proteolytic enzyme digestion were examined. The krill was chopped and mixed with equal weight of water, and hydrolyzed by autolysis and/or commercial proteolytic enzyme digestion. The optimal conditions for hydrolysis of krill were $52.5^{\circ}C$, pH 7.0-7.5, 3 hours by autolysis, $52.5^{\circ}C$, pH 6.3, 3hours by bromelain (0.5 %) digestion, and $52.5^{\circ}C$, pH 7.0-7.5, 3 hours by commercial complex enzyme (5 %) digestion, respectively The maximum hydrolyzing rate of protein were 83.2 % by autolysis, 89.7 % by bromelain digestion, 92.7 % by commercial complex enzyme digestion. After krill meat hydrolyzed by autolysis at optimum condition, inactivated at $100^{\circ}C$ for 20 minutes and filtered with Buchner funnel. Two kinds of products were prepared with krill hydrolysate and preservatives: one contained 10 % of sodium chloride and 0.06 % of benzoic acid and the other 10 % of sodium chloride and 3 % of ethyl alcohol. These products were filled in the sterilized glass bottle and sealed. The pH, volatile basic nitrogen, amino nitrogen, color value (L, a and b values) and viable counts of bacteria were determined during storage at $37^{\circ}C$. The results showed that the products could be preserved in good condition during one month at $37^{\circ}C$. As a method to reduce the sodium level in krill sauce, it is convinced that sodium chloride could be replaced half in partially by potassium chloride. In the products prepared from krill by autolysis, bromelain or commercial complex enzyme digestion, hypoxanthine and 5'-IMP were abundant among the nucleotides and their related compounds as 15.3-20.4 ${\mu}mole/g$, dry solid, 2.2-2.5 ${\mu}mole/g$, dry solid, respectively. The abundant free amino acids were lysine, leucine, proline, alanine and valine. The contents of these amino acids were 67.4 %, 69.4 %, 69.8 % of the total free amino acids of each products. And TMAO, betaine and total creatinine were low in contents. The flavor of krill sauce prepared from krill by autolysis or enzyme digestion was not inferior to that of traditional Kerean soy sauce by sensory evaluation.

• Journal of Korean Society of Forest Science
• /
• v.86 no.4
• /
• pp.415-421
• /
• 1997

The objectives of this study were to obtain standardized basic data on cambial electrical resistance (CER) of ornamental trees to be used for estimation of tree vigor and to compare CER between shrubs, deciduous, and coniferous trees in relation to bud opening, flowering, and growth cessation. Eighty healthy trees with four trees each for twenty ornamental tree species growing at an university campus in Suwon were selected and their CER was measured using a Shigometer every week from March to May, once a month from June to October and every two weeks in November, 1996. The CER of all tree species was high in March, started to decrease in April, maintained minimum in May through August, began to increase in September, and returned in November to the similar high level to March. Among the 20 species, Metasequoia glyptostroboides showed the lowest($5.5k{\Omega}$) annual average CER, while Cercis chinensis and Ligustrum obtusifolium had the highest($22.7k{\Omega}$, $22.9k{\Omega}$) annual average CER. The lowest CER($2.4k{\Omega}$) in summer(June through August) was obtained from Wisteria floribunda, second lowest($2.5k{\Omega}$) from Metasequoia glyptostroboides, the highest CER($46.8k{\Omega}$) during dormant season from Euonymus japonica, and second highest($45.0k{\Omega}$) obtained from Ligustrum obtusifolium. The CER of most species, particularly shrub species, started to decrease with bud opening, and many species, particularly shrubs and deciduous trees with large amount of flowers, showed sharp decrease with flowering. When CER was compared between shrubs and trees, shrubs showed higher average CER than trees, and seasonal difference in CER of evergreen species was smaller than that of deciduous species. It is interesting to note that the deciduous Metasequoia glyptostroboides had the lowest annual average CER.